logo

DigiPara Liftdesigner

Here you will find the latest information about DigiPara Liftdesigner.
Downloads will be availbale to existing clients. Please login to see the downloads.

You do not yet know the DigiPara Liftdesigner?

DigiPara Liftdesigner is a sophisticated Intelligent Elevator Configurator, which combines all the important elevator information to design elevators. The software allows the ability to quickly design and configure 2D elevator drawings and 3D elevator models.

Would you like to test the software for free?


Free Trial Version


Login
Rendered in: 00:00:00.6428522


  • Changes
  • Downloads
Expand/Collapse all

LD_18_00_203
LD 2018 Version, released 12th of December, 2018

TR-05613 (Finished)
Created by: MM
Last change: 12/7/2018 8:51:30 AM

Available as LDXMachineRoom.MachineRoomDoor(0) resp (1) or direct properties LDXMachineRoom.MachineRoomDoor1 and LDXMachineRoom.MachineRoomDoor2.

TR-05617 (Finished)
Created by: MM
Last change: 12/12/2018 10:30:06 AM

Early in 18.0.13, component lists got a new enforced rule that each contained component object IX needs to be unique.
This rule was also enforced on load.
Unfortunately, the default additional component list of shafts in certain configurations (Rope, machine room below) had by construction non-unique IX values, those were changed on load and changed the objects' treenames.
Double unfortunately, the list of components the rope passes through uses treenames for reference and then failed to find the components.

Version 18.0.203 now no longer does the problematic renaming and can repair those files corrupted by loading and saving them with earlier versions.

LD_18_00_0201
LD 2018 Version, released 6th of December, 2018

TR-05608 (Finished)
Created by: AG
Last change: 11/30/2018 9:22:31 AM

For DST2 new L_Projects storages are needed

Sub tasks:
Completed:
Verified by
Yes
Project name 2 (L_Projects.PROJ_NAME2)
Yes
email
Yes
Requirement
Yes
Format
Yes
Scale
Yes
Website
Yes
Unit
Yes
email
Yes
Approved on
Yes
Verified on
Yes
Phase
Yes
email
Yes
Approved by
Yes
email
Yes

TR-05611 (Finished)
Created by: MM
Last change: 11/30/2018 9:22:59 AM

resulting in wrong dimensions of the shaft opening on import.

TR-05416 (Finished)
Created by: AF
Last change: 12/13/2018 3:19:43 PM

After adding an additional child to FLL.,
- it is show in the additional objects form
- it is NOT shown under FLL.

I have not verified whether it shows up in the drawing. Please check that as well.
Thx

Andreas Fleischmann 10/7/2018
2018-10-07_14-13-37
TR-05612 (Finished)
Created by: MM
Last change: 12/6/2018 9:18:55 AM

Car guide rails (as .COUNT)
Cwt guide rails (as .COUNT)

Car buffer (as .BUFFER_COUNT)
Cwt buffer(as .BUFFER_COUNT)

Anchor rails – brackets list (as .AR_COUNT)

TR-05514 (Finished)
Created by: MM
Last change: 12/13/2018 3:19:43 PM

LD_18_00_0197
LD 2018 Version, released 21st of November, 2018

TR-05526 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM
TR-05504 (Finished)
Created by: KN
Last change: 11/13/2018 1:29:55 PM

The bracket dimension for car E2 is not coming in correctly like it is for Car E1. It is offset 12” due to the pit depth difference between the cars.

Kai Nitz 10/31/2018
LD_Error_Report_Bracket_to_floor_dimension_for_Car_E2

LD_18_00_0195
LD 2018 Version, released 24th of October, 2018

TR-05436 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM
TR-05413 (Finished)
Created by: AF
Last change: 11/29/2018 10:22:49 AM

Actually the extended bracket dimensions refer bracket positions and the guide rail end positions. This behavior SHALL remain. (blue lines in image)

Change request:
Additionally a new flag on view frame level should assign the finished floor levels as reference plane. ( green dashed lines)

In that case the dimensions referring the guide rail end will not show up. The user has to define, which of the 2 scenarios he wants to use.

Andreas Fleischmann 10/7/2018
2018-10-07_13-45-26
TR-05427 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

but really, they're always calculated from the jamb.

TR-05467 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM
TR-05437 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM
TR-05468 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

Hard to pin down the exact cause, but sometimes, the usual methods (both) of updating a global variable equation fail. In that case, we delete and recreate that equation. If recreation fails, sadly, the document is broken and needs to be closed without saving it.

TR-05425 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

while not wrong, they cause a data tree refresh and make old shaft wizard slow.

LD_18_00_0193
LD 2018 Version, released 11th of October, 2018

TR-05405 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM
TR-05409 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

Steps to reproduce:
1. Create a dynamic dimension on some shaft door
2. Insert a floor level below that shaft door

Result: There will be two dynamic dimensions, one on the old door that got moved, one on the new door that moved into the treename of the old one.

TR-05404 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

In some configurations, the gear's angle is automatically calculated always, but the UI still allows the user to select manual editing. That is confusing.
(Spinoff from TR-05403).

TR-05403 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

Or rahter, the absence of the flag; manual alpha selection was not possible in all situations where it should be.

The change was introduced in cs 32042, probably with the well meaning intention of avoiding invalid ALPHA values for the gear. But misguided.

Revert the change and instead, in the PropertyGrid, when the user switches to away from manual back to automatic placement, also activate automatic alpha calculation.

TR-05410 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

The formula defined in L_LDXPointTab was not in sync with what the C++ code was calculating.

TR-05423 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

We start SolidWorks with 'new SldWorks();', just like the docs say. However, the state the application is in then sometimes is corrupt and for some projects (for internal reference: M:\TMP\Moos\TR-Archive\TR-05423) results in equations being broken and unupdatable.

TR-05411 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

LD_18_00_0185
LD 2018 Version, released 25th of September, 2018

TR-05393 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

DWG exports with CAD files with an occurrence hierarchy had their geometry exported multiple times, presumably each line got exported for each occurrence it is a subpart of.

This was introduced with the fix for TR-05093 in LD_18_00_0168.

TR-05332 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

If the back wall of the machine room in a vertical section aligns with the front wall of the shaft, it gets hatched.

TR-05383 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

LD_18_00_0182
LD 2018 Version, released 10th of September, 2018

TR-05334 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM
TR-05337 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

catastrophically. The result looked wrong already, and later would cause crashes.

LD_18_00_0178
LD 2018 Version, released 31th of August, 2018

TR-05312 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

Was associated with shaft 0 before, so all global storage dimensions were only visible if shaft 0 was visible.

Normally, it would be possible to disable the culling by visible shafts, but some special case logic prevents that for global storages. So we just set the SX of the storages to -1.

This is applied on creation and on loading of old projects.

LD_18_00_0177
LD 2018 Version, released 30th of August, 2018

TR-05302 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

Thus, error messages with filenames that contain non-ASCII characters were not displayed correctly.

TR-05313 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

Dangerous flag in ObjectModes.

If you set it on an object and then perform a document.GetValue(treename), the object self destructs.

The flag seems to be intended for a particular internal use case, but does not seem to be set intentionally, ever. Either simply remove its functionality or safeguard it against outside use (in Serialize, OnValueChanged and the COM SetMode function).

Duplicate of TR-05299 for 2018 revision list.

TR-05257 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

When editing a rail bracket's geometry, the developer sheet would not show the correct instructional dwg block.

LD_18_00_0176
LD 2018 Version, released 17th of August, 2018

TR-05248 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

Copy of TR-05246 for 2018 revision list.


TR-05228 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

Also:

CLDXHideCS::put__Set
static GMatrix3 GetMatrix(ILDXHideCS5 *pICS)
void LdBox::Set(ILDXHideBoundingBox5*pB)

Most often called:
CLDXDocument::CalculateModelAndBuildSheet.

They all get a COM interface via a get_* method and don't release it.

It's just the tiny control object and the functions (with the exception of CalculateModelAndBuildSheet) are practically not called, so this is unlikely to show up in memory profiles.

LD_18_00_0171
LD 2018 Version, released 17th of July, 2018

TR-05114 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

The two attached parts have a length, for both it is unavailable for mapping.

TR-05115 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

TFS_Training\Training\LD\Basic_Training\Materials\DP-SW RB01 0000 00

Nothing much we can do here, it's an internal SolidWorks error. For now, avoid driving global parameters/equations, stick to feature dimensions.

LD_18_00_0168
LD 2018 Version, released 12th of July, 2018

TR-05096 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM
TR-05097 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

For visibility check based on the frame's visible box, the base coordinates of the component were used instead of the coordinates of the relevant characteristic/selection point.

In the attached TKEUS file, the annotation "X" was invisible.

TR-05093 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

It is present in LD and the other exports.
It reappears in the DWG if and only if you remove the car itself from the drawing.

TR-05077 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM
TR-05043 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

An uninitialized variable is read from in this case.

Fortunately, the practical worst case result in this case was performance loss. If the uninitalized variable would turn out to have a valid ObjectId by chance, an object of that type would be created and deleted and the file would be looked for a second time.

LD_18_00_0163
LD 2018 Version, released 4th of July, 2018

TR-04928 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

After copy/pasting of annotations, new and old annotation share an index. It's not used for anything, so there is no ill effect, but it is bad style and may cause trouble later.

TR-05001 (Finished)
Created by: MM
Last change: 7/4/2018 2:22:41 PM

The view frame would be empty until the next recalc.

TR-04976 (Finished)
Created by: MM
Last change: 7/4/2018 2:22:41 PM

Missed for TR-04976: The tree view that appears when you select a dynamic rule value source/target.

TR-04886 (Finished)
Created by: MM
Last change: 11/8/2018 12:43:36 PM
Sub tasks:
Completed:
New dyndim replacement logic not applied
Yes
manual move does not work
Yes
Dyndims initially have identical CODE_NO for first and second point
Yes
View frame empty until recalc
Yes
view frame flickers into empty (already for non-occurrence dyndims)
Yes

TR-04999 (Finished)
Created by: MM
Last change: 7/4/2018 2:22:41 PM

The existing LDXSheetFrame.CreateDynDim method requires the two dimension points to be in the current selection, which is quite impossible to achive from outside of real user interaction.
The new CreateDynDimEx method accepts the specifications for the dimension points directly as arguments.

TR-04974 (Finished)
Created by: MM
Last change: 7/4/2018 2:22:41 PM
TR-05016 (Finished)
Created by: MM
Last change: 7/4/2018 2:22:41 PM

See attached file ContagiousShaftDash.ld3. Only the shaft is set to 'dashed', but the floor level geometry also gets dashed. Note that this only happens if the shaft hole is set to be created; if it is deactivated, then the floor level stays opaque.

The cause was a very stupid implementation of how the shaft is dashed, affecting random bodies.

Manuel Moos 6/27/2018
ShaftDashHowItLookedBefore
ShaftDashTarget
TR-04975 (Finished)
Created by: MM
Last change: 7/4/2018 2:22:41 PM
TR-04914 (Finished)
Created by: MM
Last change: 7/4/2018 2:22:41 PM

Creo.UpdaterCore.ApplyCreoUnits caused an infinite recursion, assuming referenceUnits made sense.

TR-04998 (Finished)
Created by: MM
Last change: 7/4/2018 2:22:41 PM
TR-05023 (Finished)
Created by: MM
Last change: 7/4/2018 2:22:41 PM

LDXSheetFrame.WorldToPaper/PaperToWorld always rebuild dirty frames even if the transformation does not require the geometry.

TR-05019 (Finished)
Created by: MM
Last change: 7/4/2018 2:22:41 PM
TR-05063 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

The property 'Car section clipping plane relative', if set to 'to the car center', was not saved and loaded correctly.

To be more precise, it was saved correctly, but then overwritten on load. The reason for that was that the loading code incorrectly assumed that the frame was saved with a version of LiftDesigner where that particular setting was bugged.

This was introduced while fixing TR-04852.

TR-04973 (Finished)
Created by: MM
Last change: 7/4/2018 2:22:41 PM

LD_18_00_0144
LD 2018 Version, released 6th of June, 2018

TR-04888 (Finished)
Created by: MM
Last change: 7/4/2018 2:22:41 PM

Pulley beams and rope fixing are supposed to have fixed indices and names based on the configuration, but instead they were numbered in order of creation.

Steps to reproduce:
Create new elevator
Pick minimal payload and speed
pick configuration shown in wizard screenshot (with extra pulleys on top for car and counterweight)

Manuel Moos 6/6/2018
wrong
correct
wizardconfiguration

LD_18_00_0142
LD 2018 Version, released 5th of June, 2018

TR-04878 (Finished)
Created by: MM
Last change: 7/4/2018 2:22:41 PM
TR-04879 (Finished)
Created by: MM
Last change: 7/4/2018 2:22:41 PM

Were visible even if the holes themselves were not.

This was introduced with TR-02628.

LD_18_00_0140
LD 2018 Version, released 4th of June, 2018

TR-04870 (Finished)
Created by: AF
Last change: 7/4/2018 2:22:41 PM
TR-04871 (Finished)
Created by: AF
Last change: 7/4/2018 2:22:41 PM

at least not reliably. The reason may have been wrong handling of file write times. Those were fixed. In addition, on reload the entries of the DWG file in the cache are now completely cleared so we no longer have to rely on file access times, the reload should always happen.

Originally unreported, but related: Embedded DWG frames had other problems. Reload on them would do nothing (just reload the embedded copy, which was unchanged). Then reverting to non-embedded may have seen an old cached version displayed still. Now, it acts as expected: Reloading an embedded DWG reloads the original file (if found) and clears both the original and the embedded copy from the cache, so both are refetched when used.

LD_18_00_0138
LD 2018 Version, released 4th of June, 2018

TR-04873 (Finished)
Created by: AF
Last change: 7/4/2018 2:22:41 PM
TR-05046 (Finished)
Created by: AF
Last change: 7/4/2018 2:22:41 PM
TR-04872 (Finished)
Created by: AF
Last change: 7/4/2018 2:22:41 PM

LD_18_00_0134
LD 2018 Version, released 30th of May, 2018

TR-04846 (Finished)
Created by: MM
Last change: 5/30/2018 10:19:13 AM

Giving the annotation a DYNDIM_CODE in addition to the LDXComp it already points to should suffice, data wise.

Sub tasks:
Completed:
When profile points with CODE_NO set are annotated, move the annotation to the p
Yes

TR-04852 (Finished)
Created by: MM
Last change: 5/30/2018 10:19:13 AM
TR-04522 (Finished)
Created by: AF
Last change: 5/30/2018 10:19:13 AM

Developer view frames used to not show any dimensions because they all were 3d views, even the orthogonal projected ones.

When we added dimensions to those kinds of view frames, the developer view frames also gained dimensions, most of the time very unwanted.

Extended dimensions also show up even though they are disabled via the dimension green buttons.

Andreas Fleischmann 3/6/2018
2018-03-06_16-07-57
TR-04862 (Finished)
Created by: MM
Last change: 5/30/2018 10:19:13 AM

When we added the flag combination for dashdotdot, other flag combinations were declared illegal/reserved.

Unfortunately, they exist in projects out there. So now, as best as we can, we interpret unknown flag combinations as Version 2016 did and log an error the first time this happens.

TR-04855 (Finished)
Created by: MM
Last change: 5/30/2018 10:19:13 AM

It interferes with unconventional checks in rules.

Moved to ObjectStatus::obsInvisible.

TR-04856 (Finished)
Created by: MM
Last change: 5/30/2018 10:19:13 AM
TR-04853 (Finished)
Created by: MM
Last change: 5/30/2018 10:19:13 AM

LD_18_00_0132
LD 2018 Version, released 25th May, 2018

TR-04847 (Finished)
Created by: MM
Last change: 5/30/2018 10:19:13 AM

Converting images in BMP format was broken all trhough LD 2017 up to version 2017.0.300.

TR-04845 (Finished)
Created by: MM
Last change: 5/30/2018 10:19:13 AM

The sill support is supposed to be determined by L_DoorFixingTab.DF_SS_RID of the bottom door fixing points if nonzero. However, the order of ChangePartRID calls changed when we added the door fixing points to car doors, too, and the default setting from L_DoorDimTab.DD_SS_RID always wins.

Version 17also affected from the introduction of car door fixing points up to 2017.0.299.

TR-04840 (Finished)
Created by: MM
Last change: 5/30/2018 10:19:13 AM

In LD2017 and earlier, counterweight inlets or other touching profiles were fused together in detail view frames. Restore that if the DocumentLegacyMode is set before 2018.

TR-04836 (Finished)
Created by: MM
Last change: 5/30/2018 10:19:13 AM

sporatically? It may be required to copy/paste it into a new view frame or copy/paste the view frame itself.

Version 2017 up to 17.0.299 (From ~250) was also affected.

Manuel Moos 5/23/2018
overwrite_debug_trigger
TR-04842 (Finished)
Created by: MM
Last change: 5/30/2018 10:19:13 AM

Shaft dash overwrites only work since LD 2017. Old frames may still have the overwrites, though, and they should not have an effect if the frames are from an older version.

Version 17 also affected, up to 17.0.299.

LD_18_00_0129
LD 2018 Version, released 16th May, 2018

TR-04808 (Finished)
Created by: AF
Last change: 5/30/2018 10:19:13 AM
TR-04810 (Finished)
Created by: AF
Last change: 5/30/2018 10:19:13 AM
TR-04807 (Finished)
Created by: AF
Last change: 5/30/2018 10:19:13 AM

User may add e.g. "+{0.5*P1}" or "-{0.5*P1}" to a DX/DY/DZ/X0/Y0/Z0 Formular

The program will evaluate the value of the formular in brackets and ADD OR SUB the related value from the current formular, and add or sub the related new term.

TR-04811 (Finished)
Created by: AF
Last change: 5/30/2018 10:19:13 AM

Add a category [0020] General, Name (similar to occurence)
Allow users to edit this value
Take the value from L_ProfilTab.P_DESC

No need to default the content if empty
Conversion will add the occ name

Sub tasks:
Completed:
Properties: Add a category [0020] General, Name (similar to occurence), allow us
Yes
Additional Objects Dialog: Show P_DESC behind Profile1....
Yes
Put the OCC name into L_ProfilTab.P_DESC
Yes

TR-04809 (Finished)
Created by: AF
Last change: 5/30/2018 10:19:13 AM
TR-04826 (Finished)
Created by: MM
Last change: 5/30/2018 10:19:13 AM

They sometimes appear without geometry even though hoops is looking in the right place.

Sometimes (see attached files), they are just loaded in a different 3d format we did not yet support.

Other times, files that should be found really are not found.

LD_18_00_0126
LD 2018 Version, released 5th May, 2018

TR-04786 (Finished)
Created by: MM
Last change: 5/9/2018 3:32:59 PM

After putting a rail bracket to manual and disabling some options, editing gets disabled completely

TR-04812 (Finished)
Created by: AF
Last change: 5/9/2018 3:32:59 PM

There are manual opartions required to get the software properly installed on Windows 7. Please read here how to install it:

https://www.digipara.com/Portals/0/MC/WEB-EN/Default.htm#DP/LD/Admin/TroubleShoot/2018/LD2018OnWin7.htm

TR-00900 (Finished)
Created by: KN
Last change: 5/4/2018 4:48:09 PM
TR-04525 (Finished)
Created by: MM
Last change: 5/9/2018 3:32:59 PM

Annotations were also affected.

Manuel Moos 5/9/2018
before_annotation
before
after_annotation
after
TR-04435 (Finished)
Created by: MM
Last change: 5/9/2018 3:32:59 PM

It did already, mostly. Only when the DataTree window was hidden on startup and then revealed, the first view was wrong.

TR-04436 (Finished)
Created by: MM
Last change: 5/9/2018 3:32:59 PM

So that profiles are no longer sorted
Profile 0
Profile 1
Profile 10
Profile 11
...
Profile 19
Profile 2
Profile 20
...

TR-04767 (Finished)
Created by: AF
Last change: 5/9/2018 3:32:59 PM

In the occurrences window, you can now convert occurrences to simplified LD Profiles in the right click context menu.

The occurrences are converted to simple block profiles attached to the parent component of the UserComp holding the CAD file. LOD visibility options are transfered, too. Converted profiles are turned invisible on all LOD levels.
The orientation of the block is chosen in a way that, If the profile is later switched to a different type, it still makes sense.

We do not yet care for the actual fine geometry of the occurrences.

TR-04797 (Finished)
Created by: AF
Last change: 5/9/2018 3:32:59 PM

Angle/X0/Y0/Z0 coordinates were unintuitive for the special UserComp Components.Global that determined the export coordinates for IFC and LDBim since that component determines the INVERSE of the transformation applied when exporting.

In the property grid and there only, Angle/X0/Y0/Z0 now determine the actual transformation when exporting. After an import, the elevator's orgigin will be at X0/Y0/Z0 and the elevator will be rotated clockwise by Angle.

TR-04796 (Finished)
Created by: MM
Last change: 5/9/2018 3:32:59 PM
TR-04795 (Finished)
Created by: AF
Last change: 5/9/2018 3:32:59 PM
TR-04784 (Finished)
Created by: MM
Last change: 5/9/2018 3:32:59 PM

Profile orientation should be changable without changing the profile's bounding box

Manuel Moos 5/7/2018
2018-05-07_17-00-52

LD_18_00_0123
LD 2018 Version, released 2nd May, 2018

TR-04696 (Finished)
Created by: AF
Last change: 5/2/2018 1:12:00 PM
Sub tasks:
Completed:
"{pool}/Sheets" for load and save view frame
Yes
"{pool}/Projects" for load and save ld3-projects
Yes
"{pool}/Blocks" for load DWG (into annotation of view frame)
Yes
"{pool}/CADmodel" for load any CAD model file
Yes
Remember CAD model load folder: Current is loaded from the same folder as load l
Yes
"{pool}/Sheets" for load and save sheet template
Yes

TR-04747 (Finished)
Created by: AF
Last change: 5/2/2018 1:12:00 PM

Gruppe [3635] View Frame settings
(1) Change test "Detail Mode" to "Representation"

(2) Always show the property "Representation".

(3) Change Combo box content
(3a) if no overwrite is there, please show "Default (by Sheet Frame"
(3b) otherwise show LOD 100,.....

Andreas Fleischmann 4/27/2018
2018-04-27_13-42-04
TR-04748 (Finished)
Created by: AF
Last change: 5/2/2018 1:12:00 PM

Must be adapted for the new LOD Levels.

Please consider the new additional flag for marking that the value contains new LOD values. (Users must set this manually if they edit here)

Andreas Fleischmann 4/27/2018
PG_P_DETAIL-List
TR-04749 (Finished)
Created by: MM
Last change: 5/2/2018 10:49:26 AM

Editing the flags in PG_P_DETAIL still used the old format with the three detail steps.

TR-04723 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

caused by an early return on successfully drawing the fist. Only applies to vertical views.

Manuel Moos 4/25/2018
centerline_missing

LD_18_00_0122
LD 2018 Version, released 27rd of April, 2018

TR-04703 (Finished)
Created by: AF
Last change: 5/2/2018 10:49:26 AM
TR-04399 (Finished)
Created by: MM
Last change: 4/27/2018 10:40:45 AM
Sub tasks:
Completed:
Better normal check to determine extreme point orientation
Yes
TR-04670 (Finished)
Created by: AF
Last change: 4/23/2018 3:49:04 PM

In Revit the red elements are missing.
Is the "ID List " missing the the 3D DWG export?

Andreas Fleischmann 4/12/2018
2018-04-12_20-04-12
2018-04-12_19-59-43
TR-04701 (Finished)
Created by: AF
Last change: 5/2/2018 1:12:00 PM
Andreas Fleischmann 4/23/2018
2018-04-23_12-34-39
TR-04694 (Finished)
Created by: AF
Last change: 5/2/2018 1:12:00 PM

When pressing the button to select from the data tree, the current selected variable should be selected.
(a) at least for the "A1"..."A3" columns
(B) better also for the "C" Columns, in case the variable is just encapsulated by LD("") or LDS("")

Thank you

Andreas Fleischmann 4/23/2018
2018-04-23_10-30-36

LD_18_00_0115
LD 2018 Version, released 23rd of April, 2018

TR-04686 (Finished)
Created by: AF
Last change: 4/23/2018 3:10:51 PM

Es gibt 2 neue LDMs
40-10, ECC Plus

Sub tasks:
Completed:
Recalculate VALID RIDs
No
Add to BModules
Yes
Please install on Fermator AWP server
No
Install with FE and later
Yes

TR-04414 (Finished)
Created by: AF
Last change: 5/2/2018 1:12:00 PM

Außerdem "Latest" ist unklar
(a) Ist es Latest das wir unterstützen? "Latest Supported"
(b) ist es latest das bei mir installiert ist ? "Latest Installed"

Wenn ich latest habe wird creo 4 gesucht, ist bei mir nicht installiert. Die Fehlermeldung die dann kommt könnte erheblich aussagekräftiger sein.

Bitte vor dem API Kommando prüfen, ob es den eingestellten CREO-Pfad überhaupt gibt und sonst eine sinnvolle Meldung ausgeben.

- Add a browse button to the creo path, with the correct search filename for easier locating

Meine Schindler Anwender hatte übrigns 3.0 in einer anderen M... irgendwas version. Die Einstellung 3.0 ist dann nicht hilfreich, weil sie nicht funktioniert.

Ich denke "Latest Installed" sollte default sein und den korrekten Pfad irgendwie selber suchen, und das Eregbnis der Suche im Path folder Anzeigen


Ggfls Rücksprache.

Andreas Fleischmann 2/8/2018
2018-02-08_15-40-53
TR-04657 (Finished)
Created by: AF
Last change: 5/2/2018 1:12:00 PM

In case of Imperial projects the default values like 10, 20 or 100 is much too big.
Please see the image for proper default values.

Andreas Fleischmann 4/10/2018
2018-04-10_15-11-18
TR-03431 (Finished)
Created by: AF
Last change: 4/23/2018 3:10:51 PM

Add a second item
DigiPara Liftdesigner Logviewer 2018 (Admin)

that will automatically be invoked as Admin

TR-04685 (Finished)
Created by: SFA
Last change: 4/23/2018 3:10:51 PM

[thomas.bucher@schindler.com]Wie kann dieses Feld geändert werden?
Details im beigefügten Dokument

TR-03958 (Finished)
Created by: MM
Last change: 4/23/2018 3:10:51 PM
Sub tasks:
Completed:
PointCode 50 -> LDXCarDoor
Yes
PointCode 50 -> LDXCarDoor (2017)
Yes
PGT_RID for LDXUserComp
Yes
Profile point ppmPriorityOverChildren
Yes

LD_17_00_0311
LD 2017 Version, released 30th of August, 2018

TR-05299 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

Dangerous flag in ObjectModes.

If you set it on an object and then perform a document.GetValue(treename), the object self destructs.

The flag seems to be intended for a particular internal use case, but does not seem to be set intentionally, ever. Either simply remove its functionality or safeguard it against outside use (in Serialize, OnValueChanged and the COM SetMode function).

LD_17_00_0308
LD 2017 Version, released 17th of August, 2018

TR-05246 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

LD_17_00_0307
LD 2017 Version, released 17th of July, 2018

TR-05087 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

Dimension text toggle should also exist on view frame (and sheet) level

While there, correct "Global" property grid text

Manuel Moos 7/9/2018
2018-07-09_15-28-53
2018-07-09_15-29-49

LD_17_00_0305
LD 2017 Version, released 10th of July, 2018

TR-04159 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-05089 (Finished)
Created by: MM
Last change: 11/29/2018 10:22:49 AM

Pattern matching was not activated on the 17.0 branch yet.

TR-04942 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

LD_17_00_0302
LD 2017 Version, released 8th of June, 2018

TR-04908 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

Since version 2017.0.301. YN is supposed to be initialized from the DoorTypeTab, but at the point the code did that, the new table was not yet read.

This was introduced when fixing TR-04845.

This is a duplicate entry for TR-04866 for the revision list of 2017.

LD_17_00_0301
LD 2017 Version, released 28th of May, 2018

TR-04678 (Finished)
Created by: AF
Last change: 5/2/2018 1:12:00 PM

The text "LOD 100" has the setting "Extends Left Bottom"
It should be close to the 3D Geometry / characteristic points

Andreas Fleischmann 4/16/2018
2018-04-16_14-44-30
TR-04365 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-04638 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

Was supposed to only happen in side views.

Manuel Moos 4/6/2018
2018-04-05_15-20-48
2018-04-05_15-20-22
TR-04821 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-04579 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

2018 not affected.

Manuel Moos 3/21/2018
2018-03-21_14-51-17
TR-04785 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

Shaft0.Components.WallFixing1.X0 wrong in attached file, sheet TKAW_XC61_MR_PLAN1

TR-04769 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-04637 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

LD_17_00_0294
LD 2017 Version, released 5th of April, 2018

TR-04470 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

Open attached project (simple 2x2 shaft group), activate merged machine room.

TR-04599 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-04629 (Finished)
Created by: AF
Last change: 5/2/2018 1:12:00 PM
Andreas Fleischmann 4/4/2018
2018-04-04_12-48-33
TR-04402 (Finished)
Created by: MM
Last change: 3/19/2018 12:35:02 PM

LD_17_00_0288
LD 2017 Version, released 8th of February, 2018

TR-04171 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-04083 (Wait.f.Client)
Created by: AF
Last change: 3/7/2018 1:05:38 PM

This article explains the use:

https://www.digipara.com/Portals/0/MC/WEB-EN/Default.htm#DP/LD/Config/LDX/Shaft/03 Rail Bracket/01 Bracket List/01 Bracket/01 AR/DynamicAR.htm

Sub tasks:
Completed:
Improve C++
Yes
Improve Common Components Seperator Beam
No

TR-04187 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-04205 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-04189 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

3 twin group
move machine rooms a bit to the front
DO NOT CalculateModel
mergeEx 0 + 2
mergeEx 2 + 4
machine rooms would extend to the back

TR-04175 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

LD_17_00_0279
LD 2017 Version, released 12th of December 2017

TR-04190 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

LD_17_00_0276
LD 2017 Version, released 1st of December 2017

TR-04168 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

RailBrachet*{Last}. should match the topmost rail brachet.
RailBracket*{IndexFromEnd, -3}. should match the third rail bracket from the top.

TR-03973 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

and repairs them automatically with a very short notification window. It then offers to save the changes when you close the document.

TR-04166 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

Annotation arrow size was hardcoded to 3.5 mm in paperspace.

Use LD_ObjectDescTab value for LD_USER(_IMP):ANNOTATION_ARROW_SIZE instead if set.

Manuel Moos 11/23/2017
After
Entries
Before
TR-04172 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

See atteched project and screenshot.

Manuel Moos 11/30/2017
2017-11-30_12-23-08

LD_17_00_0273
LD 2017 Version, released 24th of November 2017

TR-04164 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-04055 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-04086 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-04165 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-04031 (Finished)
Created by: AF
Last change: 7/4/2018 2:24:06 PM

The created dimension does not appear on the drawing

Andreas Fleischmann 9/29/2017
MissingDimensionOnDrawing
TR-03947 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

If floor level is not synced to entry, floor level finish thickness should have no effect.

Manuel Moos 10/18/2017
FinishMismatchFixed
FinishMismatch
TR-03861 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-04145 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

the ALPHA values are now not rounded and exact enough to be used to align other components or view frames using them.

If you want rounded values for drawings back, you can wrap the External in formula evaluation delimiters "\;", apply the formula calculation prefix "#" and the rounding prefix "[.0]", so
\;#[.0]External$("Shaft0.Gear.ALPHA")\;
instead of
External$("Shaft0.Gear.ALPHA")

TR-04127 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

Already possible.

The regular components can just be added via the + button.

The machine room ceiling can't be added, but the whole machine room can be added with the green button.

To get rid of the walls, you can add a section hole to the frame specifically: Select SheetFrame.Sections.Section0.WallOpenings., then pick "Add wall opening" in the property grid. See CreateViewFrameWallOpening.png

To make the wall opening do what we want, we need to set the hole mode to 2050 (See HoleMode.png), this makes the positioning relative to the machine room.

Then you need to set the coordinate system to "Room".

Then you set the automatically calculated values to DX, DY, DZ, set Z0 and Z1 to 0 to cut above the floor and below the ceiling. X0, X1, Y0 and Y1 go do a sufficiently low negative value to cut out the walls (-1000 should do). See HoleProperties.png.

Even better: Set the coordinate system to "Room", then "Individual".
Then do as above, but set X0, X1, Y0 and Y1 to zero as well and the X0 and Y0 interpretation to "From outer side of wall to hole edge". This will cut out the walls no matter how thick they are. (See HoleProperties2.png)

Also attached: A view frame where such a hole is already present.

Manuel Moos 11/7/2017
HoleProperties2
HoleProperties
HoleMode
CreateViewFrameWallOpening
TR-04098 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

Load attached file, recalc.
First, the gear base construction is visible, then it vanishes.
Or rather, it shrinks to its correct dimensions.

TR-04052 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

Hole and wall segment visibility was not controllable by any category. They logically belong to the UNKNOWN group, which is always visible.

Change: They now belong to all of the below groups:
1. Either the shaft or machine room, depending on the state of the hmRelatedToMachineRoom HoleModes flag
2. The class of their parent component
3. The class of the room they hierarchically belong to

This could be a breaking change for some projects.

TR-04097 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

No. Those are data errors and did not match an object previously, so they should not match anything now. Log them, however.

TR-03850 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-04070 (Finished)
Created by: AF
Last change: 7/4/2018 2:24:06 PM

A wrong line is displayed in Plan view, when the anchor rails are off.
How to solve that?

Andreas Fleischmann 10/10/2017
2017-10-10_13-55-28

LD_17_00_0247
LD 2017 Version, released 26th of September 2017

TR-03983 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

See attached project and screenshot. Some offscreen elements (Beams) are fragmenting the floor finish geometry in ways that it can't cope with.

Manuel Moos 9/22/2017
finish_corrupted
TR-03967 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-03982 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

In the attached file, the userComps attached to floor levels should be exported to BIM, but were not.

TR-03935 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-03981 (Finished)
Created by: MM
Last change: 1/2/2018 12:17:09 PM

Load the view frame sheets/TKEAP/TKEAP_HEADROOM_DETAIL_SX0.ldf, then move it.
The displayed geometry will jump.
Move it again, the geometry will jump again.
From then on, it will be stable.

TR-03936 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM
TR-03992 (Finished)
Created by: DC
Last change: 7/4/2018 2:24:06 PM

Poolmanager is now able to import new modules in a command line interface call with the new parameter "-CHECKAUTOIMPORT"

LD_17_00_0242
LD 2017 Version, released 30th of August 2017

TR-03671 (Finished)
Created by: MM
Last change: 10/18/2017 2:54:55 PM

While the observed behavior is by design, the cut car design view is now only ever activated if an actual car design is visible. That makes it less confusing (and would have avoided the issue in the test case).

TR-03871 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

The attached project has overwrites not ending in a dot. If you add it, the overwrites vanish.

TR-02729 (Finished)
Created by: AF
Last change: 5/2/2017 12:24:51 PM
Sub tasks:
Completed:
Common Lateral MRL, etc... soll z.b heißen "Common Components Traction, Lateral
Yes
"Traction" bzw "Hydro" belibt , obwohl es im DTT_DESC wiederholt wird
Yes
"Lateral Guided" vs. "Central Guided"
Yes
"with MR" vs "MRL"
Yes
"Traction" vs "Hydro"
Yes
"with MR" vs "MRL" entfällt hier, steht ja schon im DTD_MF_DESC
Yes
"Gearing" wird durch "TM" ersetzt (traction machine).... die meisten Aufzüge sin
Yes
Für alle records "car pulleys und cwt pulleys seperat und einheitlich benennen
Yes
Properly set this variable to the same as CWT wall ( for lateral)
Yes
Set this variable to 1 for central guided
Yes
Andreas Fleischmann 10/26/2016
2016-10-24_12-28-54

TR-03886 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

3d View initialization crashes for at least one customer. We can't do anything about the crash, but we can delay initialization as long as possible.

TR-03884 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

If you change, not just extend, a dynamic dimension first object reference string, the old obsolete dynamic dimension still stays alive. Only reloading the project sees it removed.

TR-02159 (OnOpenList)
Created by: SFA
Last change: 2/23/2017 7:39:03 AM

[daniel.bannwart@ch.schindler.com]When I use the "explode" command two times to fully open up the block, the dimensions increase in size as shown below in the Word Document

TR-02305 (Finished)
Created by: AF
Last change: 8/12/2016 9:16:45 AM
Nikolaj Merzlikin 7/13/2016
Zweite_Kopie
Erste_Kopie
Original
TR-02038 (Finished)
Created by: AF
Last change: 5/5/2017 1:17:57 PM

Testing scenario must be on a LDAWP-Server, using LDAWPUser, etc.

TR-02178 (Wait.f.Client)
Created by: SFA
Last change: 10/27/2016 10:02:21 AM

[daniel.bannwart@ch.schindler.com]If a text is copied from a Liftdesigner PDF file, it is not possible to paste the string inaother document...for example a Word Document.

dirk.cleff@digipara.com 5/31/2016
screenshot_pdf
screenshot_pdf
daniel.bannwart@ch.schindler.com 5/31/2016
screenshot_pdf
screenshot_pdf
TR-02202 (Wait.f.Client)
Created by: SFA
Last change: 10/27/2016 10:02:52 AM

[daniel.bannwart@ch.schindler.com]LD do not show correct shape of STM, and shows standard ropes instead

TR-03811 (Finished)
Created by: MM
Last change: 10/18/2017 2:54:55 PM
TR-03875 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

Editing overwrite names now always works, dynamic dimension entpoint objects are editable in the property grid.
overwrite values are still not editable.

TR-03812 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

New rope compensation mode: predictable approximate location of lowest rope point.

TR-01319 (OnOpenList)
Created by: NM
Last change: 10/25/2018 12:25:17 PM

Document:
Open, Save, Close, Change, View activate, Selection changed u.s.w.

TR-01310 (Finished)
Created by: NM
Last change: 5/2/2018 10:49:50 AM

1) Neues Projekt anlegen.
2) Addin xml erstellen.
3) Classen für Application und Commands anlegen
4) Installation Class erstellen
5) Liftdesigner Projekt anpassen oder neu anlegen

TR-01315 (OnOpenList)
Created by: NM
Last change: 4/12/2018 10:17:43 AM

Shafts classen in Revit Erstellen.
Neue Familien für: Wände, Türen, Seilen, Kabine, Kabinen Design, Gegengewicht u.s.w

TR-01316 (Finished)
Created by: NM
Last change: 5/2/2018 10:49:50 AM
TR-01312 (Finished)
Created by: NM
Last change: 5/2/2018 10:49:50 AM

WPF MVVM Classen für Start Page für Erste Schritt und Weitere Schritte erstellen.
1) Neue Test LD-Dokument estellen
2) LD-Dokumente anzeigen
3) LD-Dokumente löschen
3) LD-Dokumente kopieren

TR-01318 (OnOpenList)
Created by: NM
Last change: 4/12/2018 10:17:43 AM

1) bei neu anlegen
2) bei aktualisieren
3) bei laden aus äußere ld3
5) bei Export
6) bei speichern in Datenbank
7) Report anzeigen

TR-03844 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

If you click "Next" too fast or "Finish" multiple times, various problems occur. Crashes can happen or you can get multiple new shafts.

TR-03870 (Finished)
Created by: MM
Last change: 7/4/2018 2:24:06 PM

even after deleting them. In the attached sample, the Shaft0.Entries*.E*.*.-Overwrite should affect the panels, but does not. The Shaft0.Entries*.E*.Panel0. -Overwrite rightfully affects Panel0, but Shaft0.Entries*.E*.Panel*.Hole should not affect any panel itself. Panel1 should be dashdotted, but is not.

The effect persists even after deleting the masking overwrites. Only after saving and reloading, the catch-all wildcard will work properly.

Manuel Moos 8/22/2017
masking2
masking
TR-03184 (Finished)
Created by: MM
Last change: 8/30/2018 3:55:26 PM

LD_17_00_0209
LD 2017 Version, released 13th of June 2017

TR-03531 (Finished)
Created by: AF
Last change: 6/13/2017 11:52:09 AM

Minor extensions for double wrap. See also:

https://www.digipara.com/Portals/0/MC/WEB-EN/Default.htm#DP/LD/DB/MDF/02_Elevators/06 Traction Units/DoubleWrapTraction.htm

Andreas Fleischmann 5/24/2017
2017-05-24_11-53-23
TR-03516 (Finished)
Created by: MM
Last change: 6/13/2017 11:52:09 AM
TR-03587 (Finished)
Created by: KN
Last change: 6/13/2017 11:49:18 AM

Hall button holes should be visible accross all shafts, also when the hall button is moved from one into another shaft.

TR-03583 (Finished)
Created by: MM
Last change: 6/13/2017 11:52:09 AM

New mode flag hmNoRoomCheck deactivates the check that prevents holes from going too far into other rooms/shafts.

TR-03137 (Finished)
Created by: AF
Last change: 6/13/2017 11:52:09 AM

Sonst gibt es einen Fehler bei den Fermator Materialien

Der Cabin designer sollte dadurch nicht freigeschaltet sein, das habe ich überprüft.

https://eu7.salesforce.com/a062000000aWYB2

@Kai: Kannst du das beim Setup entsprechend eintragen
@Manuel: Muss dort iregndwas bei der FE Freischaltung erweitert werden?

TR-03518 (Finished)
Created by: MM
Last change: 6/13/2017 11:52:09 AM
TR-03562 (Finished)
Created by: MM
Last change: 6/13/2017 11:52:09 AM

Versions 16.0.0 to 16.0.187 had hole placement that differed from 15.X. 16.0.188 fixed this buggy behavior. However, files from the faulty versions then loaded incorrectly, affecting some users negatively.

On loading files from known defective versions, modify the data so the defective behavior is reproduced.

Cutoff version will be 16.0.196. The first version actually released after the fix was 16.0.200, so no files from released versions would load incorrectly.

Alternative cutoff version would be 16.0.177; that is the last detectable change before the fix. Files saved with released version 16.0.183 and 16.0.187 still would load incorrectly.

TR-03346 (Finished)
Created by: AF
Last change: 6/13/2017 11:52:09 AM

This button is deactivated, if the project is not EN 81.

This is wrong: The button should be enabled always to show the docking window.
The EN 81 calculations should be activated only if EN 81, no change in that matter.

TR-03595 (Finished)
Created by: AF
Last change: 6/13/2017 11:52:09 AM
TR-03582 (Finished)
Created by: AF
Last change: 6/13/2017 11:52:09 AM

In case users use System.Math functions in dynamic rules, the user can do this without exact namespace, e.g.

just Abs(....)
He should fix that to
System.Math.Abs(...)

Otherwise the dynamic rule dll will fail, because this namespace is not properly referred.

This problem has been fixed.

LD_17_00_0199
LD 2017 Version, released 28th of April 2017

TR-02906 (Finished)
Created by: AF
Last change: 5/24/2017 3:25:18 PM

LiftDesigner required too frequent reactivations. The source was some Windows installation data entering the requestcode generation that was fixed on earlier versions of Windows, but now started changing on bigger updates.
After installing this update, you will need to reactivate LiftDesigner. Sorry for the inconvenience.


TR-03337 (Finished)
Created by: AF
Last change: 5/24/2017 3:25:18 PM

C:\_tfs\Service\Accounts\Enterprise\Schindler\Develop\SDB\CreoSamples\MDC\10000332174_Omega-Bracket

On some CREO CAD files, geometry that should be visible was not shown.


TR-03316 (Finished)
Created by: MM
Last change: 5/24/2017 3:25:18 PM
TR-02887 (Finished)
Created by: NM
Last change: 5/24/2017 3:25:18 PM

Fermator Door Designer UI

Sub tasks:
Completed:
Wpf UI dll
Yes
UI Translation: De and EN
Yes
New manufacturer
Yes
UI Color & Style
No

TR-02897 (Finished)
Created by: SFA
Last change: 5/24/2017 3:25:18 PM

[daniel.bannwart@schindler.com]Excel import for contant groups.
The user can save time if they create a lot of new constant groups with excel file import, like in the screenshot....

daniel.bannwart@schindler.com 1/11/2017
Screenshot
TR-03331 (Finished)
Created by: MM
Last change: 5/24/2017 3:25:18 PM

Strings containing unicode characters were mangled on save to database. Single quotes (') were not properly escaped.

TR-03243 (Finished)
Created by: MM
Last change: 5/24/2017 3:25:18 PM

The geometry creation mode for traveling cables was defaulted to invisible. The reason was that back in 16.0, it only made the cable invisible in the Inventor plugin. Since it now it also affects regular drawings, that default is no longer right.

It has been reverted to visible.

LD_17_00_0196
LD 2017 Version, released 15th of March 2017

TR-02990 (Finished)
Created by: MM
Last change: 3/3/2017 5:34:07 PM

Setting CarWall.Count over COM had no persistent effect in manual count mode; it would immediately alter the number of wall panels, but the next CalculateModel would change it back. For full effect, you also needed to set the LIST_COUNT variable.

CeilingPanels and FloorPanels had the same problem.

This now happens automatically in the .Count setter.

TR-03069 (Finished)
Created by: MM
Last change: 3/3/2017 5:34:07 PM

An overeager memory leak bugfix caused dynamic anchor rails on rail brackets to crash on update.

TR-03017 (Finished)
Created by: AG
Last change: 3/15/2017 4:17:58 PM

Mode 96, Option Datamanager

Alexandra Göttert 2/7/2017
FixingGroupsNewFlag
TR-03082 (Finished)
Created by: AG
Last change: 3/3/2017 5:34:07 PM

Edit floor finish in second shaft not possible -> differnet to the original in one machine room

Alexandra Göttert 2/16/2017
2017-02-16_14-02-35
TR-02815 (Finished)
Created by: AF
Last change: 3/3/2017 5:34:07 PM

Users frequently copy just a piece of the computer verification code into the dialog box.
Instead of copying the whole key, like:
"LENOVO-PC:MODULE:04328-161153-170602-WZGFEJ-VOKCLV-OL4RCC-YOZYQS"

They only copy a part like:
"04328-161153-170602-WZGFEJ-VOKCLV-OL4RCC-YOZYQS"

This is the improvement:
When the code is not complete copied, please try in the back ground to automatically add the missing characters in front. If this is ok, automatically complete the input field and proceed as usual.

TR-03019 (Finished)
Created by: MM
Last change: 3/3/2017 5:34:07 PM
TR-03021 (Finished)
Created by: MM
Last change: 3/3/2017 5:34:07 PM
TR-03175 (Finished)
Created by: KN
Last change: 4/25/2017 4:51:33 PM

The certified Fermator Premium Doors manufacturer library is now part of the Liftdesigner 2017 Free Edition and commercial Editions

Kai Nitz 3/15/2017
PremiumDoor
TR-03176 (Finished)
Created by: KN
Last change: 4/25/2017 4:51:33 PM

The Fermator door configurator is now part of the Liftdesigner 2017 Free Edition and commercial Editions

New Fermator Door Configurator

Kai Nitz 3/15/2017
FermatorDoorConfigurator
TR-03174 (Finished)
Created by: KN
Last change: 4/25/2017 4:51:33 PM

The certified Fermator Compact Doors manufacturer library is now part of the Liftdesigner 2017 Free Edition and commercial Editions

New, certified Fermator Compact Doors library

Kai Nitz 3/15/2017
CompactDoors

LD_17_00_0180
LD 2017 Version, released 31th of January 2017

TR-02983 (Finished)
Created by: MM
Last change: 3/3/2017 5:34:07 PM

Intermediate dots in CAD file names were taken over to the tree name prefix where they are illegal.

TR-02891 (Finished)
Created by: MM
Last change: 3/3/2017 5:34:07 PM
TR-02794 (Finished)
Created by: AG
Last change: 8/30/2018 3:55:26 PM

If the button is placed in the jamb, the hole was not deep enough (See attached screenshot).

Alexandra Göttert 11/17/2016
TR-02794
TR-02904 (Finished)
Created by: AF
Last change: 3/3/2017 5:34:07 PM
Manuel Moos 1/20/2017
china_installer
Andreas Fleischmann 1/13/2017
Gueven Error
TR-02907 (Finished)
Created by: MM
Last change: 3/3/2017 5:34:07 PM

External LdSheet. lookup, which should refer to the current sheet, does not appear to work correctly when the sheet is just being switched to.

LD_17_00_0163
LD 2017 Version, released 5th of January 2017

TR-02883 (Finished)
Created by: MM
Last change: 3/3/2017 5:34:07 PM

Door fixing point sets can have filters based on door height; however, they were only applied when the door was exchanged completely.

TR-02886 (Finished)
Created by: MM
Last change: 3/3/2017 5:34:07 PM

If you copy a shaft via the clipboard or the shaft group editor, the lamp lists in the new shaft are broken. The lamp RIDs are 0 and the positions are reset.

TR-02881 (Finished)
Created by: MM
Last change: 3/3/2017 5:34:07 PM

Landing door aprons were not visible.

LD_17_00_0156
LD 2017 released on 5.December 2016

TR-02821 (Finished)
Created by: AF
Last change: 3/3/2017 5:34:07 PM

The new value
#define DT_DRAW_TYPE_CHECK_YN_LIMITS = 0x0400
can currently not be selected.

Please add this value to the list.

Andreas Fleischmann 12/5/2016
2016-12-05_9-25-03

LD_17_00_0154
LD 2017 Version, released November 17th, 2016

TR-02785 (Finished)
Created by: MM
Last change: 5/2/2017 12:24:44 PM

No texture, no bumpmap: Changing the diffuse color does not yield automatic updates in the render view.

TR-02717 (Finished)
Created by: MM
Last change: 11/17/2016 9:58:05 AM

Yes, a small scene rebuild is possible after color changes and fixes updates to mirrors. Their emission/reflectivity can't be changed with overwrites, they would also kill the mirror image.

TR-02728 (Finished)
Created by: AF
Last change: 8/30/2018 3:55:27 PM

We need to find a better satisfying solution.
I have no chance to enter the distance of the beams.
Modifying GFR_BEAM_DX.... is not satisfying and frustrating.
Probably we need additional fields in the property grid ( at the single beam please)

TR-02788 (Finished)
Created by: AF
Last change: 8/30/2018 3:55:26 PM

liefert bei mir ein graues Image, nicht aber den richtigen View

Save as Image funktioniert

LD_17_00_0152
LD 2017 Version, released November 9th, 2016

TR-02309 (Finished)
Created by: SFA
Last change: 10/27/2016 6:37:02 PM

[daniel.bannwart@ch.schindler.com]2nd instance of LiftDesigner not possible with LLiftdesigner 2016.0.217.0.

daniel.bannwart@ch.schindler.com 7/14/2016
Screenshot
TR-02778 (Finished)
Created by: MM
Last change: 11/17/2016 9:58:05 AM

The owner of shaft materials is overwritten illegally from the serialization of a frame's section list.

Workaround: Press recalc button after sheet frame paste operation.

TR-02774 (Finished)
Created by: MM
Last change: 11/17/2016 9:58:05 AM

For most components, this is not a big deal because the next CalculateModel resets the index anyway.
For some components (LDXProfile, for example) this autocorrection does not happen and the tree name of the target component is wrong.

LD_17_00_0147
LD 2017 released on 1.November 2016

TR-02390 (Finished)
Created by: AF
Last change: 10/27/2016 6:37:02 PM

My Windows 10 Server shows PDF files within Edge.

Nevertheless a message appears "Can´t find a PDF Reader"

How can we solve/remove this error message? We could probably check which app is regisrtered for PDF viewing?

Andreas Fleischmann 10/20/2016
2016-10-20_11-12-10
TR-02590 (Finished)
Created by: MM
Last change: 10/27/2016 6:37:02 PM

Siehe Screenshots. Maximiert man das Fenster, indem man die Titelleiste nach oben zieht, verschwinden die Navigationselemente.

Manuel Moos 9/13/2016
fullscreen
window
TR-02688 (Finished)
Created by: AF
Last change: 10/27/2016 6:37:02 PM

Präambel:
Die Sache mit den Extension Lines bleibt bitte separat



[3615] Dimensions
Settings: Hier geht nur Individuell und Global.

Es ist unklar was "Global" ist.


Soll soll es bitte werden:

VIEW FRAME:
Settings:
"Individual" bleibt und bedeutet "by Frame"
"Global" wird umbenannt zu "Default (By Sheet)"

SHEET:
Am Sheet brauchen wir dann auch die entsprechenden Einstellungen:
- Geometry Distance, text height, etc.

Settings:
Neu und default: "Default (By Sheets)"
Neu: "individual" und bedeutet "by Sheet"


SHEETS:
Am Sheets hätte ich gerne die selbe Logik

Settings:
Neu und default: "Default (By Prototype DWG)"
Neu: "Individual" bedeutet "By Sheets"

Am Sheets brauchen wir dann auch die entsprechenden Einstellungen:
- Geometry Distance, text height, etc.

TR-02718 (Finished)
Created by: AF
Last change: 11/17/2016 9:58:05 AM
TR-02719 (Finished)
Created by: AF
Last change: 11/17/2016 9:58:05 AM
TR-02464 (Finished)
Created by: MM
Last change: 10/27/2016 6:37:02 PM

Every frame has its body list. That list is kept until the frame is rebuilt, even though it is rarely needed again, only to build the 3D view. Body lists of non-current sheets should be deleted and only rebuilt on demand.

TR-02732 (Finished)
Created by: AF
Last change: 11/17/2016 9:58:05 AM
TR-02217 (Finished)
Created by: AF
Last change: 10/27/2016 6:37:02 PM

Default is the last used option (initial default should be "relative")
One flag is enough and means all files.

TR-02715 (Finished)
Created by: MM
Last change: 10/27/2016 6:37:02 PM

Would be unwise to support. CAD files can be quite non-convex. But picking a shaft CSG mode should have no ill effects.

TR-02766 (Finished)
Created by: AF
Last change: 11/17/2016 9:58:05 AM
TR-02705 (Finished)
Created by: KN
Last change: 10/27/2016 6:37:02 PM

Es soll auch die Eingabe von Dezimalwerten bei der Winkeleingabe möglich sein. Siehe angehangenes Bild.Könnten wir dabei nicht auch direct die Winkel als zusätzliche Properties im Grid anzeigen / editierbar Machen?

Sub tasks:
Completed:
Eingabe von dezimalen Winkeln bei der Profilerstellung
Yes
die Winkel als zusätzliche Properties im Grid anzeigen
No
Kai Nitz 10/18/2016
Winkeleingabe_Dezimal
ProfileAngle
TR-02699 (Finished)
Created by: AF
Last change: 10/27/2016 6:37:02 PM
Sub tasks:
Completed:
B1 Text is in the wrong place
No
B1 should be rotated
No
Arrow is missing
No
Andreas Fleischmann 10/17/2016
2016-10-17_10-08-42
2016-10-17_10-07-17
TR-02698 (Finished)
Created by: AF
Last change: 10/27/2016 6:37:02 PM
Andreas Fleischmann 10/17/2016
2016-10-17_10-05-34
TR-02583 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
TR-02582 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
TR-02629 (Finished)
Created by: MM
Last change: 10/27/2016 11:45:09 AM

Seems to have been that way at least since v2015.

TR-02697 (Finished)
Created by: AF
Last change: 10/27/2016 6:37:02 PM

It should be possible to export the ldm12 only

Today also the sql file is created and remains in the export folder
Please add an option "Create SQL file": If checked the sql file should be in the export folder, otherwise it should not be there.

I have slightly rearranged the options for "create export txt file" as well.

Andreas Fleischmann 10/17/2016
2016-10-17_9-52-20
TR-02696 (Finished)
Created by: AF
Last change: 10/27/2016 11:45:09 AM
TR-02695 (Finished)
Created by: AF
Last change: 10/27/2016 11:45:09 AM

Man kann mit Ctrl-F suchen und dort auch replacen. Man erhält eine Meldung zb "85 Stellen ersetzt".

Allerdings sind danach alle datensätze noch im "Edit" mode und müssen zum Speichern alle einmal aufgerufen und gespeichert werden ( mit dem cursor drüberfahren)

Frage: Kann man nach dem Ersetzen die Frage Stellen "85 Datensätze geändert. Sollen die Änderungen gespeichert werden?" [SPEICHERN / NEIN]

TR-02693 (Finished)
Created by: MM
Last change: 10/27/2016 6:37:02 PM

Considered implementing the option, but it would be impossible to make sense of "this object only" option on parent component if this were supported.

Disabled the option in the property grid.


TR-02551 (Finished)
Created by: MM
Last change: 10/27/2016 11:47:23 AM
TR-02700 (Finished)
Created by: AF
Last change: 10/27/2016 6:37:02 PM
Andreas Fleischmann 10/17/2016
initialbasepointinsidesectionbox
ShouldShowSymbol
TR-02712 (Finished)
Created by: AF
Last change: 10/27/2016 11:45:09 AM

in case I use LD on the second screen, mainframe in full screen mode.
After restarting LD appears on the first screen in full screen mode, should be the second screen

TR-02255 (Finished)
Created by: MM
Last change: 10/27/2016 6:37:02 PM

Even if no change happened, CAD files are embedded into the memory files for undo. That's wasteful. Store only the GUID and keep the files alive with shared_ptrs.

TR-02153 (Finished)
Created by: MM
Last change: 5/5/2017 1:17:57 PM

Procedure:
Load file
Make Change
Undo
Redo
Result: View frames empty, undo impossible

TR-02716 (Finished)
Created by: MM
Last change: 10/27/2016 11:47:23 AM

Check initial background
Use global default for new projects

TR-02513 (Finished)
Created by: MM
Last change: 5/2/2017 12:24:44 PM

open attached file
switch view frame to 3d view
switch to print mode
disable shaft section view
disable machine room in frame
disable shaft in frame
increase FOV to perspective view
rotate view wildly.

Hypothesis: Crash requires ambient occlusion on and transparency algorithm ZSortNicest. Six crashes were observed with both on, while giving the same or more time to test either of the indicators off.

Rejected. Crash observed with ambient occlusion and depth peeling.

Reduced hypothesis: It's just the ambient occlusion. Held for 10 minutes (average crash would take 30 seconds).

Not reproduced in WPF sandbox.

Sub tasks:
Completed:
Report to Techsoft.
Yes
Work around it (rollback to SP1)
Yes
TR-02692 (Finished)
Created by: MM
Last change: 11/11/2016 3:54:41 PM
TR-02458 (Finished)
Created by: MM
Last change: 10/27/2016 11:47:23 AM

When pressing SHIFT or CONTROL before the mouse enters the 3d view, the select/highlight mode is not triggered.

LD_17_00_0146
LD 2017 Free Edtion, 26.10.2016

TR-02575 (Finished)
Created by: AF
Last change: 5/2/2017 12:24:51 PM

do not add geoemtry details, just basic geometry

TR-02577 (Finished)
Created by: AF
Last change: 5/2/2017 12:24:51 PM
TR-02001 (Finished)
Created by: KN
Last change: 3/15/2017 4:25:16 PM

Connect String Anpassen für neue SQL Server Version

Sub tasks:
Completed:
-NET 3.5 Framework Installation entfällt
No

TR-02273 (Finished)
Created by: AF
Last change: 3/15/2017 4:22:31 PM
TR-01623 (Finished)
Created by: AF
Last change: 3/15/2017 4:24:39 PM

Könnten Sie bitte folgendes prüfen (LD2015):

Wenn ich die Ghost-Positionen einstelle in Kombination mit der buffer-Compressed Option wird der Buffer nicht compressed dargestellt.

Wenn ich Car und Counterweight (erste beiden Optiionen) benutze wird der Buffer compressed dargestellt.

Ist bei mir unabhängig vom Projekt.

Andreas Fleischmann 10/2/2015
ghost
TR-02574 (Finished)
Created by: AF
Last change: 5/2/2017 12:24:51 PM
TR-02572 (Finished)
Created by: AF
Last change: 5/2/2017 12:24:51 PM
TR-02573 (Finished)
Created by: AF
Last change: 5/2/2017 12:24:51 PM
TR-02243 (Finished)
Created by: MM
Last change: 3/15/2017 4:21:30 PM

LDXUserComp now supports setting equations via Set/GetEquation, similar to LDXProfile.

To activate the equations, set the ucmUseEquationsAndAngle mode flag, or pick the new "Manually by Equations" position mode in the properties.

Parameters for the equations are taken from the parent component.

Manuel Moos 6/23/2016
usercompparameter
TR-02578 (Finished)
Created by: AF
Last change: 5/2/2017 12:24:51 PM
TR-02576 (Finished)
Created by: AF
Last change: 5/2/2017 12:24:51 PM

LD_17_00_0138
LD 2017 Free Edtion, 14.10.2016

TR-02553 (Finished)
Created by: AF
Last change: 10/13/2016 10:31:48 AM

Sometimes this message appears when you start LD. That is OK.

Problem is, that LDOOP_UI.exe is not properly quit after this message and will cause other issues afterwards.

TR-02407 (Finished)
Created by: AF
Last change: 10/13/2016 10:16:36 AM

Bei "Develop this product" , "Show Profiles" automatisch einschalten

TR-02404 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
TR-02545 (Finished)
Created by: AF
Last change: 10/13/2016 10:16:36 AM
Andreas Fleischmann 9/5/2016
2016-09-05_13-51-55
TR-02395 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
TR-02418 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02419 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-01948 (Finished)
Created by: AF
Last change: 8/12/2016 9:13:08 AM
TR-02570 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
TR-02018 (Finished)
Created by: AF
Last change: 8/12/2016 9:18:54 AM
TR-02399 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM

LinkedIn bleibt bitte wie es ist, nicht invertieren.

Die anderen beiden sind dann etwas weniger präsent, das ist gut so.

Irgend einen laufenden Text etc machen wir nicht.

Andreas Fleischmann 8/11/2016
2016-08-11_15-33-49
TR-02650 (Finished)
Created by: MM
Last change: 10/13/2016 10:31:48 AM

Load attached .ld3 file, make BIM export, crash in body list operations.

TR-02311 (Finished)
Created by: AF
Last change: 8/12/2016 9:16:45 AM

This is a 2017 file

Sub tasks:
Completed:
CWT in vertical sectio n /pit not correct
Yes
DBG not correct
Yes
Andreas Fleischmann 7/15/2016
2016-07-15_13-43-58
2016-07-15_13-43-26
TR-02216 (Finished)
Created by: AF
Last change: 8/12/2016 9:16:45 AM
TR-02218 (Finished)
Created by: AF
Last change: 8/12/2016 9:16:45 AM
TR-02219 (Finished)
Created by: AF
Last change: 8/12/2016 9:16:45 AM

e.g. In case "Shaft.Width" etc is set in the Excel file

TR-02266 (Finished)
Created by: MM
Last change: 8/12/2016 9:16:45 AM

or other nonsense. Probably best to check whether it's a child of a shaft.

TR-02592 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
TR-02602 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

Man kann zwar über das PropertyGrid oder Manage all CAD files das Excel-File rauslöschen, aber das LDXInsertedCADFileMapping wird man nie wieder los.

TR-02460 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
TR-02550 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

If you pick a read only CAD mapping file, LD crashed after setting up the mapping.

That crash is fixed, but maybe we should not let the user pick read only mapping files in the first place, and also not accept it if the CAD file is read only.

TR-02660 (Finished)
Created by: MM
Last change: 10/13/2016 10:31:48 AM

Problematic: Adding the mapping edits the XLS file which dirties the document. The next update then refuses to run.

TR-02689 (Finished)
Created by: MM
Last change: 10/13/2016 10:31:48 AM

Caused by BScopeGuard lifetime management issues.

TR-02669 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
TR-02672 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

Dragging a CAD file into the main view is now equivalent to pressing the "Add (CAD Model)" button and selecting that file.


TR-02671 (Finished)
Created by: MM
Last change: 10/13/2016 10:31:48 AM
TR-02659 (Finished)
Created by: MM
Last change: 10/13/2016 10:31:48 AM
TR-02667 (Finished)
Created by: AF
Last change: 10/13/2016 10:16:36 AM

The user should be able to choose between:

This is the default sequence

1. - Relative to Datapool ( Default: if the file is inside the data pool)
2. - Relative to project ( Default if the file is on the same drive and less then 2 x "..\")
3. - Absolute ( Default if 1. & 2. does not apply)

The relative Path setting is valid for all 3 files ( the 2 CAD models and the excel file)


.... one more thing:
Remove the "special" seacrh logic if the ..\..\.. etc does not exactly fit

TR-02687 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

Don't open the CAD program on your own, if no running instance is found, the test passes.

TR-02385 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

Cloning is not triggered
CAD Update called for all instances?

Sub tasks:
Completed:
DoorFixingPoint
Yes
GrEtage->ShaftDoor, Jamb, Finish, WallOpening, EntryPocket, SillSupport, HallBut
Yes
Guide
Yes
GuideShoe
Yes
Lamp
Yes
MoveFrame->Buffer
Yes
CarWallPanel (noch gar keine Klone?)
Yes
WallOpening
Yes
EntryPocket
Yes
SillSupport
Yes
HallButton
Yes
CarCeilingPanel
Yes
CarFloorPanel
Yes
UserComp?
Yes
In "Manage all CAD Files" Change-Events schicken und nicht vom Ergebnis umhauen
Yes
Entfernen von CAD-Files muss auch ein copy triggern
Yes
ShaftDoor
Yes
Jamb
Yes
Finish
Yes
TR-02683 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02462 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

Floor panels probably have wrong orientation

Since this is a case where the component knows the best mirroring plane, car design floor and ceiling now override the default orientation from the individual profiles.

TR-02654 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
TR-02410 (Finished)
Created by: DC
Last change: 11/3/2016 12:13:22 PM
TR-02471 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

We can at least try a little harder. The architecture of MemCopyTo and our serialization does not allow a guarantee.

TR-02191 (Finished)
Created by: AF
Last change: 8/12/2016 9:13:08 AM
Sub tasks:
Completed:
Remove VBA ldms (if so) from installation and manufacturer folders
Yes
Remove VBA Ribbon group from "Develop products"
Yes
Remove from source
Yes

TR-02429 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
TR-02206 (Finished)
Created by: AF
Last change: 8/12/2016 9:13:08 AM

In case you edit an expression, you usually need to select several values from the same base object.
Wish: The data tree should remember which element I have selected last time.
Attention:
Please implement that ONLY for this particular button in the "Text Editor", not generally in the data tree. We do NOT want this behavior from the rule editor, etc.


DCC speicherung NICHT erforderlich

Andreas Fleischmann 6/3/2016
2016-06-03_11-44-26
TR-02201 (Finished)
Created by: AF
Last change: 8/12/2016 9:13:08 AM

Rename to "DigiPara Liftdesigner Project File"

TR-02248 (Finished)
Created by: AF
Last change: 8/12/2016 9:13:08 AM

In case a DWG view frame is active the 3D export will not have any content.

Exception ist LDBIM, since this 3D export always work.

TR-02661 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
TR-01941 (Finished)
Created by: MM
Last change: 8/12/2016 9:13:08 AM

Frames with ROTATE set have their bounding box displayed at the wrong place in model space. Paper space is fine, though.

Manuel Moos 1/5/2016
metricmetric_rotation
TR-02405 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
Sub tasks:
Completed:
Design lieferz sandra
No
Implementation
No

TR-02360 (Finished)
Created by: MM
Last change: 8/12/2016 9:16:45 AM
TR-01940 (Finished)
Created by: MM
Last change: 8/12/2016 9:13:08 AM

An extra square appears in all DWG exports in model space, largest in metric models with imperial display dimensions.

Manuel Moos 1/5/2016
extraframe
TR-02276 (Finished)
Created by: MM
Last change: 8/12/2016 9:16:45 AM

Simplest case of unwanted lines in shaft geometry.

Manuel Moos 6/24/2016
extraline
TR-02403 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM

Einfach da hardcoden wo die UserGroup aus dem Ini ausgelesen wird und 8 liefern.

User Group Settings ausgrauen

TR-02523 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
Sub tasks:
Completed:
CAD File UI funktionalität enabled wenn eins dieser Module aktiv: 4603,4604, 400
Yes
Additional child enabled
Yes
Additional Holes enbled
Yes
Additional segments disabled, wenn FE
Yes

TR-02402 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
TR-02524 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
TR-02392 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
TR-02274 (Finished)
Created by: AF
Last change: 10/13/2016 10:16:36 AM
Manuel Moos 6/24/2016
entrance_view_with_floor
Andreas Fleischmann 6/23/2016
2016-06-23_17-33-18
TR-02546 (Finished)
Created by: AF
Last change: 10/13/2016 10:16:36 AM

- Model im LD not updated

Bizarre cause. Some sub-files had their Dirty flag set right after loading them. Loading them into Inventor before doing the update as standalone, visible documents prevented that from happening.
Anyway, we now only complain about dirty files if they were NOT implicitly loaded with the main CAD file (so they must have already been open before).

Andreas Fleischmann 9/5/2016
2016-09-05_15-47-16
TR-02468 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

MoveFrames need two modes:
Sync guide shoes
or don't sync.
If they are synced, they should be marked as clones, otherwise not.

16.0 compatibility mode: Don't clone.

new mode name: MoveFrameModes.mfmIndividualGuideShoes.

Sub tasks:
Completed:
New mode flag
Yes
Init mode flag on construction and archive load according to compatibility mode
Yes
Mark guide shoes as clones/not clones depending on flag
Yes
Sync guide shoes or not according to flag
Yes

TR-02627 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

Not enough of the filenames is visible.

Manuel Moos 9/26/2016
RecentFiles
TR-02616 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
TR-02652 (Finished)
Created by: MM
Last change: 10/13/2016 10:31:48 AM

The parameter "Topic" was overwritten with the value from "Message" and the value of "Message" was not stored where it was supposed to go.

Code was found using the following workaround:
dim lines as ILDXReportLines5
dim line as ILDXReportLine5 = lines.Add(Chapter, "unused", Topic, ...)
line.SetMsg(rlMessage0, Message)

For code that only needs to work on 17.X, the simpler
lines.Add(Chapter, Topic, Message, ...)
can now be used.

For code that needs to work with 17.X and earlier versions, the workaround needs to be adapted:
dim line as ILDXReportLine5 = lines.Add(Chapter, Topic, Topic, ...)
line.SetMsg(rlMessage0, Message)

Fixed. Existing RefModel code that worked around the issue needs to be adapted, see description.


TR-01980 (Finished)
Created by: MM
Last change: 8/12/2016 9:16:45 AM

Wenn man einen BIM export von einem ganz imperialen Projekt macht, dann werden beim Import viele Komponenten (vermutlich alle Klone) weit weg von ihren richtigen Orten eingefügt. Ausserdem sind die Linien alle zu fett. Entweder sind die Einheiten bei der Linienstärke und den Objektpositionen falsch, oder beim 3DDWG Export. Vergleich mit einem regulären Aufzug legt die Vermutung nahe, dass es eher der 3DDWG export ist.

Fehler besteht schon in 15.0.

Manuel Moos 2/9/2016
impbim
TR-02585 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
TR-02584 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
TR-02617 (Finished)
Created by: AF
Last change: 10/13/2016 10:16:36 AM

DTT_CF_WALL selektion

[ ] Lateral Guided Car Frames Only

Andreas Fleischmann 9/22/2016
2016-09-22_10-54-37
2016-09-22_10-25-29
TR-02356 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
TR-02535 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

According to HOOPS Support, that is indeed unsupported. Nothing much we can do except
- Wait for future releases to implement the feature
- Recommend to use shrink wrapping

TR-02636 (Finished)
Created by: AF
Last change: 10/13/2016 10:16:36 AM
TR-02544 (Finished)
Created by: AF
Last change: 10/13/2016 10:16:36 AM
Sub tasks:
Completed:
When another file shpuld be chosen, it must use the same type as actually select
Yes
When a new file is chosen, the last file file type group should be selected
Yes
Andreas Fleischmann 9/5/2016
2016-09-05_13-39-45

TR-01407 (Finished)
Created by: AF
Last change: 10/13/2016 10:32:51 AM

This change request has actually nothing to do with techsoft. Btw,since the CAD Import strongly influences the internal profile management, this request should be handled here.

ProfileMode is already completely used.

prmLayerThin = 0x0200,
prmLayerDashed = 0x0400,
prmLayerDashdot = 0x0800,

Btw, for the layers we are using 3 bits. Can we do a combination of 2 bits e.g. 0x0600 for prmLayerDashedDotoDot.

Extening the ProfileMode to longlong is more work, but might be that better solution on long term.

Andreas Fleischmann 7/28/2015
2015-07-28_09-13-58
TR-02604 (Finished)
Created by: NM
Last change: 10/13/2016 10:16:36 AM

Bei höhere Auflösung sind die Linien zu dünn

TR-02383 (Finished)
Created by: KN
Last change: 11/3/2016 12:13:22 PM

Ich denke der Fehler kommt auch bei allen anderen Versionen bei Erstellen des ersten Datenpools

Kai Nitz 8/10/2016
LogErrorOnFirstDatapoolCreation
TR-01880 (Finished)
Created by: AF
Last change: 8/12/2016 9:18:54 AM
TR-02207 (Finished)
Created by: AF
Last change: 8/12/2016 9:13:08 AM

bei Shaft1. (auch in 16.0 latest)

Andreas Fleischmann 6/3/2016
MachineBeamsMissing
TR-02195 (Finished)
Created by: AF
Last change: 8/12/2016 9:13:08 AM
TR-02322 (Finished)
Created by: MM
Last change: 8/12/2016 9:16:45 AM
TR-02601 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

"Exclude fom Update" toggles flag for embedding,
"Embed" and "File Paths is absolute" do nothing.

TR-02525 (Finished)
Created by: AF
Last change: 10/13/2016 10:31:48 AM

Most values must be preset by 40 instead of 1000, one must be set to 4. ( see image)

Andreas Fleischmann 8/31/2016
2016-08-31_16-27-28
TR-02415 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

Restrictions now only apply to everything included in the starter edition; users of anything more have edit rights anyway.
LIBSET is also free of checks. We want to be able to publish updates to that without starter edition users having to upgrade to a new LD version.

TR-02605 (Finished)
Created by: NM
Last change: 10/13/2016 10:16:36 AM

Bei höhere ist Mouse-Zeichen unsichtbar

TR-02227 (Finished)
Created by: AF
Last change: 8/12/2016 9:13:08 AM
TR-02676 (Finished)
Created by: KN
Last change: 10/13/2016 10:16:36 AM

In der L_ManufacturerTab eine neue Text Spalte anlegen "MF_DISPLAY_DESC"

Kai Nitz 10/10/2016
MF_DISPLAY_DESC
TR-02547 (Finished)
Created by: AF
Last change: 10/13/2016 10:16:36 AM
TR-02199 (Finished)
Created by: AF
Last change: 8/12/2016 9:13:08 AM

Change Text to "Short Manufacturer RID:"
Make the input field smaller

Andreas Fleischmann 6/1/2016
2016-06-01_16-55-21
TR-02457 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

It's also there on metric projects, but smaller.
Goes away after first click.

TR-02261 (Finished)
Created by: MM
Last change: 8/12/2016 9:16:45 AM

Das Gegengewicht mit CW_RID 38 ist in Verschiedenen DutyTable-Sätzen eingetragen, die zwei Puffer eingestellt haben, z.B. DTH_RID = DTC_RID = DTD_RID = 5200009 und 5200011. Seine Profilgruppe 19604 unterstützt aber nur einen. In LD2016 war es noch eine andere Profilgruppe (15000?), die auch zwei Puffer unterstützt.

Beobachtbarer Fehler: Wird einer der DutyTable-Einträge verwendet, werden zwar zwei Puffer erzeugt, aber direkt aufeinander platziert, und die automatische Berechnung der Gegengewichtsposition läuft schief.

TR-02379 (Finished)
Created by: AF
Last change: 8/12/2016 9:16:45 AM
TR-02200 (Finished)
Created by: AF
Last change: 8/12/2016 9:13:08 AM

This is the final list:

Start Page
Design Mode
Open (ld3)
Save
Zoom All
Measure
Recalculate project
3D View
Properties Window
Data Tree Window

Andreas Fleischmann 6/1/2016
2016-06-01_17-05-02
TR-02483 (Finished)
Created by: AF
Last change: 10/13/2016 10:16:36 AM

All Editions

Andreas Fleischmann 8/29/2016
2016-08-11_16-00-45
TR-02588 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
TR-02600 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
TR-02136 (Finished)
Created by: AF
Last change: 8/12/2016 9:16:45 AM
TR-02260 (Finished)
Created by: AF
Last change: 8/12/2016 9:16:45 AM
TR-01643 (Finished)
Created by: AF
Last change: 10/13/2016 10:31:48 AM

Ich würde gerne ein Objekt wählen können.
Allerdings soll nicht ständig in meiner 3D View gehighlihgted und selectiert werden; das möchte ich bitte NICHT.

Deshalb hätte ich gerne eine neue Option:
Select object ein und ausschaltbar machen so wie die anderen Optionen auch), in diesem Fall dann auch immer das selektierte Object anzeigen etc.

TR-02543 (Finished)
Created by: AF
Last change: 10/13/2016 10:32:51 AM

Does not completely work.
After selecting an element in the 3D View, it is not "selected" in the view frame.... whatever that means.

Btw, deleting the element by the "delete object" button in the toolbar, does not create the overwrite and therefore does not delete the element from the view frame.

Andreas Fleischmann 9/5/2016
2016-09-05_13-13-49
TR-02488 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02489 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM

If possible, lines only. Or shaded correctly.

Remove old highlight on selection change.

Remember to highlight lines, or selection of holes in design mode is invisible.

TR-02486 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02490 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02487 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02007 (Finished)
Created by: KN
Last change: 5/2/2017 12:24:07 PM
TR-02006 (Finished)
Created by: KN
Last change: 5/2/2017 12:24:07 PM
TR-02008 (Finished)
Created by: KN
Last change: 5/2/2017 12:24:07 PM
Sub tasks:
Completed:
Remove 32Bit related registry entries
Yes
Remove 32Bit related install conditions
Yes
Remove 32Bit related Content
Yes
Remove 32Bit related Custom Actions
Yes
Install to default 64Bit Location (C:\ProgramFiles)
Yes

TR-02009 (Finished)
Created by: KN
Last change: 5/2/2017 12:24:07 PM

New Setup will not update older LD Versions, will be installed in parallel

TR-02041 (Finished)
Created by: AF
Last change: 5/2/2017 12:24:07 PM
TR-01868 (Finished)
Created by: AF
Last change: 5/2/2017 12:24:07 PM
TR-02396 (Finished)
Created by: AF
Last change: 10/13/2016 10:31:48 AM
Andreas Fleischmann 8/11/2016
2016-08-11_15-21-30
TR-02394 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
TR-02398 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
TR-02397 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
TR-02599 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
Sub tasks:
Completed:
ReadOnly flag on subcomponents should prevent an update
Yes
Visible components that should be invisible
Yes
Error message popup culled on second, identical update
Yes
Abwicklungen in unterparts werden nicht aktualisiert
Yes

TR-02380 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
TR-02528 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
TR-02400 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM

Auch wenn man den setting im Ini ausmacht, soll dieser Screen immer angezeigt werden.
Man muss quasi immer mit dem Startscreen arbeiten
.
Danke

TR-02537 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
Sub tasks:
Completed:
Change the image
No
Update url to : https://www.digipara.com/products/liftdesigner/upgrade-to-digipa
Yes

TR-02424 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

Of CAD update related texts

TR-02058 (Finished)
Created by: AF
Last change: 5/2/2017 12:24:07 PM
TR-02470 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM

Currently, multiple CAD updates on the same Comp send one update message each.

TR-02321 (Finished)
Created by: MM
Last change: 8/12/2016 9:16:45 AM
TR-02325 (Finished)
Created by: AF
Last change: 8/12/2016 9:16:45 AM
TR-02607 (Finished)
Created by: NM
Last change: 10/13/2016 10:16:36 AM

VB Forms Settings Save and Load

TR-02426 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM

Imperial projects have currently ugly texture dimensions.

TR-02420 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02480 (Finished)
Created by: AF
Last change: 10/13/2016 10:16:36 AM
TR-02425 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM

"View from Left", for instance, has you looking at the back shaft wall by default.

TR-02430 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM

3d view initially blank
after resize, it does not show the correct object for car design selection

TR-02536 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02466 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02529 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02526 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
Sub tasks:
Completed:
hammered steel, imperial: Change one texture dim, other snaps to 0
Yes
Change diffuse color, close project, reopen, overwrite is still active
Yes
imperial/metric flag not copied to overwrite material
Yes
Pick one object, edit material, pick other object, pick first object again: Over
Yes
Selection highlight vanishes. Three options: Accept it, add its effect to materi
Yes

TR-02491 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM

Algi hydro sample project
3d view
design mode
floor finish flickers between white and grey.

4:1 bottom, 3d view
finish and shaft door hole are on the same place and cause similar conflict.

TR-02502 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM

Seems to have solved itself.

Though holes seem to get semi-random colors now. Saw black ones or white ones. Keep an eye out.

TR-02527 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
Sub tasks:
Completed:
Default opening angle: why 0?
Yes
Default opening angle: Is it stored?
Yes
Update view on angle change?
Yes
Where does 14 come from?
Yes

TR-02453 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02530 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM

After zooming in on an object, zooming out into the void is slow

TR-02423 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM

Press shift
Click and hold RMB
Move mouse ouside Visualize window
Release RMB, keep holding shift
move mouse back into window
-> Visualize thinks RMB still held

TR-02461 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02473 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02450 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM

For parallel projection, it should be possible to move the view precisely with the mouse on pan.
other operators have similar problems with window sizes other than squares.

TR-02459 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02485 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02512 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02412 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
TR-02456 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM

Now, the 3d view is automatically activated and refreshed before the contents are grabbed.

TR-02474 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02421 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM

Occlusion and Outlines already stored in document, but Antialiasing should become stored in the configuration.

TR-02406 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM

Fehlermeldung sagt "LD Visualize nicht lizensiert"...
Diese Meldung einfach wegmachen

Andreas Fleischmann 8/11/2016
2016-08-11_16-00-45
TR-02463 (Finished)
Created by: MM
Last change: 10/13/2016 10:32:51 AM
TR-02422 (Finished)
Created by: MM
Last change: 10/13/2016 10:16:36 AM
TR-02621 (Finished)
Created by: AF
Last change: 10/13/2016 10:31:48 AM

wenn man cabin design view einstellt, soll das bis zum ende der sitzung eingeschaltet bleiben.
Braucht nicht im doc gespeichert werden, bitte im DCC speichern


Wo wird eigentlich das "Smoother" gespeichert? da sollte es ggfls auch hin, ggfls rücksprache

TR-02391 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM

LD_17_00_0063
BETA Version 2017 update of 21. June 2016

TR-01648 (Finished)
Created by: AF
Last change: 10/12/2016 10:56:38 AM

@Nikolaj: Please make a source code change review
Changeset 22486

TR-01943 (Finished)
Created by: AF
Last change: 8/12/2016 9:13:08 AM

- Open a file
- select the car properties
- change the CD in the property grid
- click "X" to close LD or to close the LD3 file
--> No question appears whether you want to save the project
Obviously the "file modified flag" is not set or processed

TR-01641 (Finished)
Created by: AF
Last change: 10/12/2016 10:57:00 AM
Andreas Fleischmann 10/7/2015
2015-10-07_10-56-54
TR-01659 (Finished)
Created by: AF
Last change: 10/12/2016 10:56:31 AM
TR-02122 (Finished)
Created by: AG
Last change: 8/12/2016 9:18:54 AM

Das png für die untere Leiste hat einen weißen Rand und passt nicht zu den restlichen Images der Docking Windows.

Die Funktion zum Aktivieren des neuen 3D-Visualisation Fensters hat nicht dieselbe Bezeichnung wie das Fenster selbst.

Alexandra Göttert 4/18/2016
3D_Visualisation_02
3D_Visualisation_01
TR-01713 (Finished)
Created by: MM
Last change: 6/21/2016 12:45:51 PM
TR-00899 (Finished)
Created by: KN
Last change: 6/21/2016 12:58:56 PM

Wir sollten die Abstandsbemaßungen als editierbare Liftdesigner Std.-Bemaßungen anbieten, Die Maße nachträglich als DynDim zu erzeugen ist wenig komfortabel.

Andreas Fleischmann 6/21/2016
2016-06-21_12-57-48
TR-01444 (Finished)
Created by: HRI
Last change: 8/12/2016 9:13:08 AM

Please re-check this task: http://download.digipara.com/SoftwareApplications/ShowTaskRayTask?taskId=a0H2000000OjT3cEAF

1. LD16.0.134 was working and is completely licensed/activated ("until contract expiration")
2. Run RegLD.bat for LD15.0.210
3. Start Poolmanager (15.0.210), select V15 Pool, close it.
4. Start LD (15.0.210), close it.
5. Run RegLD.bat for LD16.0.134
6. Start Poolmanager (16.0.134), select V16 Pool, close it.
7. Start LD (16.0.134), see screenshots (1 to 6).

Heiko Richter 8/4/2015
LD-Licensing6
LD-Licensing5
LD-Licensing4
LD-Licensing3
LD-Licensing2
LD-Licensing1
TR-01885 (Finished)
Created by: AF
Last change: 5/2/2017 12:24:07 PM
TR-01759 (Finished)
Created by: AF
Last change: 10/12/2016 10:56:13 AM

- Das "Clear All" ist ganz entfallen
- Design ist im Image attached
- Elemente, die es nicht gibt, sollen generell nicht angezeigt werden

Andreas Fleischmann 11/11/2015
Breadcrumb
TR-02204 (Finished)
Created by: SFA
Last change: 8/12/2016 9:16:45 AM

[thomas.bucher@ch.schindler.com]In data tree the entry Jamb0 is not visible. Problem by Liftdesigner 2015 and Liftdesigner 2016

thomas.bucher@ch.schindler.com 6/3/2016
Data Tree
TR-01967 (Finished)
Created by: KN
Last change: 6/21/2016 1:03:59 PM

Anbei zwei Dateien die auf Basis der selben XML, einmal in 16.0.162 und einmal in 16.0.52 erstellt wurden.
Letztere(16.0.52er) wäre in dem Fall die korrekte Darstellung des Finished Floors.

TR-02194 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
Sub tasks:
Completed:
das "Additional Objects" Komanndo wandert nach, als kelines Symbol nach "Start->
Yes
Der Drawing Message Dialog Button wandert von "Start-> Windows " nach "Project->
Yes

TR-02193 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
Sub tasks:
Completed:
.NET: fremde DLLs nicht laden wenn 19992 nicht aktiv ist
Yes
UI: .NET Application: Nur aktiv wenn 19992 aktiv
Yes
LDX: Erweiterte copy protection für dll laden wenn 19992 nicht aktiv
Yes
UI: Startscreen: Nur unsere Addins anzeigen, wenn 19992 nicht aktiv ( siehe Imag
Yes
Andreas Fleischmann 6/1/2016
NurAnzeigeWenn19992aktiv

TR-01062 (Finished)
Created by: AF
Last change: 6/21/2016 1:01:46 PM
Sub tasks:
Completed:
per view frame ( default by owner, zb -1)
No
per sheet frame ( default by owner, zb -1)
No
per project ( default wie in 2015)
No
Manuel Moos 4/15/2016
customize_per_overwrite
mod_document
default_document
Andreas Fleischmann 6/5/2015
dimensions

TR-01647 (Finished)
Created by: AF
Last change: 10/12/2016 10:56:47 AM
TR-01134 (Finished)
Created by: MM
Last change: 6/21/2016 1:03:36 PM

Wir machen nur einen block pro floorlevel, der dann halt irgendwie dem Maschinenraum ausweicht. Besser wäre es, ordentlich aus einem großen block die Maschinenräume herauszuschneiden.

TR-00842 (Finished)
Created by: KN
Last change: 6/21/2016 1:02:44 PM

Maschineraum unten / neben Governor im MR erzeugt nur Pseudo-Holes, ist auch schon in V5 so.

Kai Nitz 4/13/2015
GovernorCeilingHoles
TR-01640 (Finished)
Created by: AF
Last change: 10/12/2016 10:57:03 AM

beispiel siehe anhang
das kleine preview bild müsste auch "hochkant" sein und nicht quadratisch aufgezogen

Andreas Fleischmann 10/7/2015
2015-10-07_10-52-57
TR-02124 (Finished)
Created by: AG
Last change: 5/2/2017 12:24:07 PM

Option and Rules sowie das Additional Objects Window besitzen gar kein png für die untere Leiste. Könnte man das vielleicht nochmal ändern damit es auf der Benutzeroberfläche einheitlich aussieht? (Alex)

Alexandra Göttert 4/18/2016
ImagesDockingWindows_01
TR-01887 (Finished)
Created by: AF
Last change: 6/21/2016 12:43:39 PM
TR-01942 (Finished)
Created by: NM
Last change: 6/21/2016 12:45:39 PM
TR-02125 (Finished)
Created by: NM
Last change: 8/12/2016 9:16:45 AM

Add Child CAD File in Docking Window

Sub tasks:
Completed:
Add CAD File in Docking Window
Yes
Add Items to Properties Grid
Yes

TR-01612 (Finished)
Created by: AF
Last change: 10/12/2016 10:57:13 AM
Sub tasks:
Completed:
L_OGLFilenameTab OGL_BUMP_FILENAME
Yes
Create ldm12:Autom. add material images to L_ModuleFilesTab (new MODF_MODE =2)
Yes
OGL_AMBIENT_RGBA (string 8 Zeichen)
Yes
OGL_DIFFUSE_RGBA
Yes
OGL_SPECULAR_RGBA
Yes
OGL_EMISSION_RGBA
Yes
OGL_SHININESS (float)
Yes
L_OGLFilenameTab OGL_EMISSION_FILENAME
Yes
Datamanager: Color und Image Preview im Tabledata editor
Yes

TR-01655 (Finished)
Created by: MM
Last change: 10/12/2016 10:56:34 AM

Als double, default 1.

Sammle die erstmal, es wird wohl nicht die letzte Spalte sein.

TR-02033 (Finished)
Created by: KN
Last change: 5/2/2017 12:24:07 PM

2017er Registiry keys machen keys einer parallel installierten 2016er Version kaputt

TR-01110 (Finished)
Created by: KN
Last change: 10/26/2016 4:47:00 PM

Inventor erzeugt die GuideRails nicht, es wird nur der Sketch erstellt.

Die Türen habe unterschiedliche Detail-Stati, über die die Türblatt-Subgruppen gesteuert werden.
Detail-Level 1 & 4 -> Tür zu, Detail-Level 2 -> Tür auf. ich glaube das können wir nicht, da der Status ja über den ViewFrame gesteuert wird, wird das nicht berücksichtigt so wie es aussieht.

Desweiteren erscheine an den Türen elyptische Objekte die Fragmente von deaktivierten Türgriff-Subcomponents sind?

TR-01820 (Finished)
Created by: NM
Last change: 6/21/2016 12:43:11 PM

Insert 3D Scene Visualisation

Sub tasks:
Completed:
Create L_OGLEnvironmentTab (OGLE_RID, mfrid, desc, subdesc, 6 filenames, mode)
Yes
UI 3D Visualisation (Viewframe/sheet/sheetlist)
Yes

TR-01693 (Finished)
Created by: NM
Last change: 10/12/2016 10:56:24 AM

Wall2 has 3 Panels.
1) Change Panel1 Material as Individual and select a Material
2) Select Wal2 and select other Material
Error: Wall2 changed count of the Panels from 3 to 4 and the Panels changed their Widths

TR-01615 (Finished)
Created by: AF
Last change: 10/12/2016 10:57:11 AM
TR-01753 (Finished)
Created by: NM
Last change: 6/21/2016 12:43:02 PM
TR-01817 (Finished)
Created by: KN
Last change: 10/26/2016 4:47:00 PM

Es wäre schön wenn man unter Module Files mehrere Dateien in einem Verzeichnis auf einmal anmelden könnte.

TR-01616 (Finished)
Created by: NM
Last change: 5/2/2017 12:24:07 PM

Problem:
in High DPI Liftdesigner Controls are too small-
This will be solved together with the autoscale feature of .NET 4.6 or later.

Sub tasks:
Completed:
AutoScaleMode, AutoScaleDimensions eingebaut, leider keine Wirkung
Yes
Warten auf neue Version von Revit, Inventor und VS2015 mit FrameWork 4.6
No

TR-01988 (Finished)
Created by: KN
Last change: 8/12/2016 9:16:45 AM

Display a message / hint when modules have been exported succesfully

TR-01617 (Finished)
Created by: AF
Last change: 8/12/2016 9:13:08 AM
TR-02077 (Finished)
Created by: SBZ
Last change: 8/12/2016 9:18:54 AM

The materials aren't displayed according the IX RID

TR-01953 (Finished)
Created by: NM
Last change: 10/26/2016 4:47:00 PM

New WPF Tree View Control In MPD

TR-01642 (Finished)
Created by: AF
Last change: 10/12/2016 10:56:56 AM

siehe anhang

Andreas Fleischmann 10/7/2015
2015-10-07_11-04-57 besser
2015-10-07_11-04-57
TR-01645 (Finished)
Created by: AF
Last change: 10/12/2016 10:56:53 AM

In case a component selection (Colum sample: A2) is defined in dynamic rules, a tooltip is shown up.

VisualMaterial is not derived from LDXComp, therefore no tooltip is shown.

We need a special implementation, in case a VisualMaterial is assigned.
a) we need a surface selector, similar to LD "All available surfaces"
b) a tooltip should show the selected surface, if possible together with the OGL_FILENAME image.

Andreas Fleischmann 10/7/2015
2015-10-07_13-03-56
TR-02040 (Finished)
Created by: SH
Last change: 8/12/2016 9:13:08 AM

Die Z-Position der Schachtbeleuchtung lässt sich nicht ändern.

Sergej Heer 3/8/2016
Lamps_Z-Position
TR-01636 (Finished)
Created by: AF
Last change: 10/12/2016 10:57:05 AM
Sub tasks:
Completed:
OGL_DIFFUSE_RGBA = FFFFFFFF (weiß kein Alpha)
Yes
OGL_AMBIENT_RGBA = FFFFFFFF
Yes
OGL_SPECLAR_RGBA = 202020FF
Yes
OGL_EMISSION_RGBA = 000000FF
Yes
Neue Datensätze sollen auch entsprechend gedefaulted werden
Yes
SHININESS 10
Yes

TR-02032 (Finished)
Created by: KN
Last change: 5/2/2017 12:24:07 PM

Silent install schlägt fehl. (Problem mit MS MSI Installer). Wir installieren jetzt SQL Server 2012 Express

TR-02123 (Finished)
Created by: AG
Last change: 8/12/2016 9:18:54 AM

Können wir die Ribbon Group Bezeichnung: Sheet Frame in View Frame ändern? Wenn der Anwender ansichtsrahmenbezogene Funktionen ausführt, wird er eigentlich immer mit dem Begriff: View Frame konfrontiert. Das sollte so beibehalten werden.

Alexandra Göttert 4/18/2016
UpdatePerspective_01
TR-01476 (Finished)
Created by: AF
Last change: 8/12/2016 9:16:45 AM
Sub tasks:
Completed:
-NET 3.5 Framework Installation entfällt
No

TR-02120 (Finished)
Created by: NM
Last change: 5/2/2017 12:24:07 PM

Update EA and Liftdesigner Solutions to Version 2017

Sub tasks:
Completed:
Update Assembly Infos
Yes
Update Dotfuscator
Yes
Update Windows UI Descriptions in DataManager
Yes
Export 663 and 599 Modules with new UI Desc
Yes
Update Internal Variablen, Builds Variablen and Texts
Yes

TR-01884 (Finished)
Created by: AF
Last change: 8/12/2016 9:18:54 AM
TR-01888 (Finished)
Created by: AF
Last change: 8/12/2016 9:13:08 AM

User Parameter müssen in 10er Gruppen aufgeteil werdem sonst klappt die automatische anordung (nur horizontale scrollbars) nicht mehr vernünftig.

Andreas Fleischmann 12/15/2015
2015-12-15_15-28-27
TR-02187 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
Sub tasks:
Completed:
Smoother: nur aktiv wenn 4553
Yes
Mirrors: nur aktiv wenn 4553
Yes
Cut Car Design: nur aktuv wenn 4553
Yes
Ambient Occlusion: Nur aktiv wenn 4553
Yes
Wenn kein 4553: Smoother, Mirros, Cut Car und Ambient aus
Yes

TR-02188 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
Sub tasks:
Completed:
Update Perspective immer funktional, auch ohne Visualize Modul (auch ohne 4553)
Yes

TR-02185 (Finished)
Created by: AF
Last change: 11/3/2016 12:13:22 PM
Sub tasks:
Completed:
Classic 3D View: Rename to "3D View"
Yes
3D Visualisation: rename to "3D Object Settings"
Yes
Docking window: "3D Visualisation Object Settings" rename to "3D Object Setting
Yes

LD_16_00_0263
Version 2016 update of 29h of November 2017

TR-04185 (Finished)
Created by: AF
Last change: 12/8/2017 10:08:16 AM

Please read this article:
https://www.digipara.com/Portals/0/MC/WEB-EN/Default.htm#DP/LD/Admin/TroubleShoot/2016andEarlier/LD2016onWin10.htm

Also a work around will be found there.

TR-04184 (Finished)
Created by: AF
Last change: 12/8/2017 10:08:16 AM

Instead of using the SQL Server 2008 client, DigiPara Liftdesigner is using the client of Microsoft SQL Server 2012 SP2.

This clioent can be found here:
https://www.microsoft.com/en-us/download/details.aspx?id=43339


Based on the operating system, one of the following msi Files is installed as a prerequisite:

ENU\x86\sqlncli.msi, 3.0 MB
ENU\x64\sqlncli.msi, 4.8 MB

Andreas Fleischmann 12/7/2017
2017-12-07_12-03-48
2017-12-07_12-03-40

LD_16_00_0259
Version 2016 update of 26th of July 2017

TR-03806 (Finished)
Created by: KN
Last change: 12/7/2017 11:53:40 AM

Added new Tension weight mode supporting different Governor and Tension weight pulley diameters.

LD_16_00_0258
Version 2016 update of 28th of April 2017

TR-03234 (Finished)
Created by: AF
Last change: 5/4/2017 3:12:39 PM
Sub tasks:
Completed:
merge Changeset 29379 from 16.0 to 17.0 and main
Yes
eine 2016 brauchen wir im moment nicht zu builden
Yes

LD_16_00_0253
Version 2016 update of 23. March 2017

TR-03002 (Finished)
Created by: KN
Last change: 8/31/2017 10:19:11 AM

Implement support for machine bedplate (MR top) with 2 diverting pulleys

Kai Nitz 3/23/2017
Bedplate_with_2_diverting_pulleys
TR-03144 (Finished)
Created by: KN
Last change: 8/31/2017 10:19:11 AM

The car shall be positioned at an calculated Z-Location in a specific view frame only. (for new Kone MP UR Roping View)

TR-03132 (Finished)
Created by: MM
Last change: 3/23/2017 7:04:55 PM

Even when the car position mode was on 'Other', the car position numeric value was not editable.

TR-03159 (Finished)
Created by: MM
Last change: 3/23/2017 7:04:55 PM

If sheets have a comma in their name, DWG exports with paperspace silently failed.

TR-02841 (Finished)
Created by: AF
Last change: 3/23/2017 7:04:55 PM

LD_16_00_0242
Version 2016 update of 17. November 2016

TR-02269 (Finished)
Created by: AF
Last change: 11/17/2016 8:41:00 AM

The other 2 Lamplist need other dimchain IDs, typical ID +1 or +2 ( if available and not used by other components

TR-02628 (Finished)
Created by: AG
Last change: 11/17/2016 8:41:00 AM

Bemaßungn der Wandöffnungen für Träger nur sichtbar, wenn Träger-Sichtbarkeit an. (Alex)

TR-02651 (Finished)
Created by: MM
Last change: 11/17/2016 8:39:01 AM
TR-02701 (Finished)
Created by: MM
Last change: 11/17/2016 8:41:00 AM

Shaft door jambs were rendered with default material instead of the material of the door.

TR-02414 (Finished)
Created by: MM
Last change: 11/17/2016 8:41:00 AM
TR-02475 (Finished)
Created by: MM
Last change: 11/17/2016 8:41:00 AM
TR-02790 (Finished)
Created by: AF
Last change: 11/17/2016 8:41:00 AM
TR-02270 (Finished)
Created by: AF
Last change: 11/17/2016 8:41:00 AM

There are 2 cases to be considered:
a) Lamplist in "Autpmatically" Mode. In case one DZ is selectd in the drawing, this DZ should be transferred into the "Distance between lamp" property, so that this value will be used for all lamps of this list

b) Lamplist in "Manually" Mode: In case the DZ of one Lamp is changed it should be used only for this one lamp. ( Does not work at all at the moment)

Sub tasks:
Completed:
Properly work on DZ change in Manual or Automatically Mode
Yes
Property "Distance between Lamps" must not show up
Yes
During switching from Automatically to Manually the first distance to pit change
Yes

TR-02324 (Finished)
Created by: MM
Last change: 11/17/2016 8:41:00 AM

In DigiPara.LD.UI.Operations.SheetFunctions.SetSheetFunctionProperties with key == "UI_SHEET_EDITOVERLAY":

System.Diagnostics.Process.Start(m_OverlayFullName);
blocks, but leaves UI events active,only later when eo.ShowDialog() iscalled,the UI is properly blocked.

TR-02579 (Finished)
Created by: MM
Last change: 11/17/2016 8:41:00 AM
Sub tasks:
Completed:
Property grid beam support front/rear sets property on all beams even if they ar
Yes

TR-02313 (Finished)
Created by: AF
Last change: 11/17/2016 8:41:00 AM

This article should be shown since it is "General News"?

https://www.digipara.com/how-do-manufacturers-fit-into-the-bim-puzzle/

TR-02272 (Finished)
Created by: AF
Last change: 11/17/2016 8:41:00 AM

The 2 new refuge spaces on car ( in the pit) need individual DIM Chain Ids

Andreas Fleischmann 6/23/2016
2016-06-23_15-03-17
TR-02514 (Finished)
Created by: MM
Last change: 11/17/2016 8:41:00 AM
TR-02580 (Finished)
Created by: AF
Last change: 11/17/2016 8:41:00 AM

Dear Support,

if i try to get the name from a sheet inside a condition of a constant-group i can not use the abbreaviation LDS("LdvSheet.L_ZBTab.ZB_DESC") = "SheetName01" for LDS("Sheets.LdvSheet6.L_ZBTab.ZB_DESC").

In Annotation inside LiftDesigner i can use this without any problems and get the information about the page where the e.g. viewframe is assigned.

Main-Idea is that i can use the Shhetname (from LiftDatamanager or inside LiftDesigner) to decide that i want to add Sheet-Type dependent Data.

On one page "Sheet01" inside the Titleblock the Value should have e.g. "123" and on the other page "Sheet04"- same titleblock - the value should have "456" .

It should be a solution which the user can maintain by himself.

A nice workaround or hint would be helpful.

Thanks

Stefan

The LdvSheet. treename shortcut to the currently relevant sheet should now work in rules.

Sub tasks:
Completed:
Replacement variables for LdvSheet. and LdvFrame. lookup not reliably set during
Yes
LdvSheet. and LdvFrame. lookup shortcuts only work in LDXDoc5.GetString, not .Ha
Yes
Workaround
Yes

LD_16_00_0241
Version 2016 update of 20. September 2016

TR-01281 (Finished)
Created by: AF
Last change: 10/13/2016 10:32:51 AM

EN81 rope calculations have been improved:
Calculation for Fsr_car and Fsr_cwt has been updated. Roping transmission is now considered for the suspension rope calculation.


Question was:
I have a question on how to calculate traction of the side of the suspension rope whiches attached to the counterweight .( EN 81-1 :1998 9.3 C)

in this PART OF THE CACULATIONS ( staleed / car in top position / payloud: 100% / acceleration = 0.5 m/s^2 / rope reeving ( overhead single wrap) 2:1)

in 2:1 systems , only the weight of the part of the suspension rope which is approximately equal to travel height is calculated , however in your calculations , the weight of the whole suspension rope is measured. (
≈ 2* travel height)
kindly clarify
best regards
ali maleki

Andreas Fleischmann 7/13/2015
ld2

LD_16_00_0237
Version 2016 update of 4. August 2016

TR-02298 (Finished)
Created by: AF
Last change: 11/17/2016 8:41:00 AM
TR-02326 (Finished)
Created by: SFA
Last change: 11/17/2016 8:41:00 AM

[thomas.bucher@ch.schindler.com]The configuration is not possible at the moment because the values are rounded in 10 mm steps. We had got the order from ESP to implement it

LD_16_00_0236
Version 2016 update of 29. July 2016

TR-02281 (Finished)
Created by: SFA
Last change: 8/12/2016 9:16:45 AM

[daniel.bannwart@ch.schindler.com]Dynamic Sheet Template loading issue.
I tried to describe it in the Word Document

TR-02581 (Finished)
Created by: AF
Last change: 11/17/2016 8:41:00 AM

Dear Support,

after loading the dwg to LiftDesigner it looks ok inside LiftDesigner, but the Export is not ok.

Result after export with normal LiftDesigner-Export-Function.

Freundliche Grüsse / Best Regards
____________________________________________Stefan Stappen | CAD Consultant

TR-02304 (Finished)
Created by: SFA
Last change: 8/12/2016 9:16:45 AM

[daniel.bannwart@ch.schindler.com]When LiftDesigner creates a AutoCAD drawing it appends a "_1" to most of the AutoCAD blocks.
This is not wanted by the users.

daniel.bannwart@ch.schindler.com 7/12/2016
LD2016
LD2015

LD_16_00_0229
Version 2016 update of 22. June 2016

TR-02259 (Finished)
Created by: AF
Last change: 11/17/2016 8:41:00 AM
Sub tasks:
Completed:
Objektnamenaenderungen Datenbaum Lamps RefugeSpace in 16_0
Yes
Objektnamenaenderungen Datenbaum Lamps RefugeSpace in main
Yes
Code Changes
Yes
Merge to Main
Yes
Andreas Fleischmann 6/21/2016
2016-06-21_12-32-51

LD_16_00_0228
Version 2016 update of 20. June 2016

TR-02236 (Finished)
Created by: AF
Last change: 6/21/2016 2:28:03 PM
Andreas Fleischmann 6/21/2016
3refugeSpacesOnCar
TR-02237 (Finished)
Created by: AF
Last change: 6/21/2016 2:28:03 PM
Andreas Fleischmann 6/21/2016
3refugeSpacesinPit
Andreas Fleischmann 6/16/2016
RS1
TR-02174 (Finished)
Created by: AF
Last change: 6/21/2016 2:28:03 PM

The complete object model should be moved by
Components.Global.X0
Components.Global.Y0
Components.Global.Z0

Therefore the escalator module needs to set these values properly.

Manuel Moos 5/30/2016
imported
in_ld
TR-02257 (Finished)
Created by: AF
Last change: 6/21/2016 2:28:03 PM

There are 3 different modes to export the IFC file.

Andreas Fleischmann 6/21/2016
Typical Option
2016-06-21_11-49-49
TR-02141 (Finished)
Created by: AG
Last change: 6/21/2016 2:28:03 PM

Machine beams do not show up in additional shafts.
Thus issue has been fixed.

Andreas Fleischmann 6/21/2016
2016-06-21_12-24-24
Alexandra Göttert 4/28/2016
TR-02141

LD_16_00_0223
Version 2016 update of 20. May 2016

TR-02134 (Finished)
Created by: KN
Last change: 6/21/2016 2:28:03 PM

The landing door "Distance Sill to Wall" property, that can be changed via the property docking window in Liftdesigner, doesn't consider the DT_INSTALL_Y0_* door values, specified in the database, by default. A new mode flag (1024) has been added to the DT_DRAW_TYPE column in the L_DoorTypTab table. This mode activates the support for the DT_INSTALL_Y0_* values for the corresponding door property.

Kai Nitz 5/25/2016
YN_DoorModeFlag1
YN_DoorModeFlag
TR-02172 (Finished)
Created by: KN
Last change: 6/21/2016 2:28:03 PM

The size of exported PDF files is quite huge when images (.jpg, .png, .bmp, etc.) are included in the drawings. This issue has been fixed.

LD_16_00_0200
Version 2016 update of 20. April 2016

TR-01978 (Finished)
Created by: AF
Last change: 6/21/2016 2:28:03 PM

Personal folders are no more longer used. LD is using "roaming folders" or folders in the current data pool instead.

TR-01979 (Finished)
Created by: AF
Last change: 6/21/2016 2:28:03 PM
TR-01872 (Finished)
Created by: AF
Last change: 6/21/2016 2:28:03 PM

error and filename in attached bitmap
error ld3 also attached

Andreas Fleischmann 12/4/2015
2015-12-04_15-25-11
2015-12-04_15-25-19
TR-01987 (Finished)
Created by: AF
Last change: 6/21/2016 2:28:03 PM

- also the MR looks wrong.

Sub tasks:
Completed:
Also the MR looks wrong
Yes
Landing door is partly missing
Yes
Door wall opening is not transparent
Yes
(round) Governor holes are not transparent
Yes
Andreas Fleischmann 2/10/2016
2016-02-10_14-10-47
TR-02070 (Finished)
Created by: AF
Last change: 6/21/2016 2:28:03 PM

if anchor rails are disabled, do not add the anchor rail holes

Sub tasks:
Completed:
Shaft export: appears black
Yes
Entering a name does not actually change the filename
Yes
Disable UI for STEP
Yes
Shaft and machine room main hole visibility inconsistent between design mode vie
Yes

TR-01981 (Finished)
Created by: AF
Last change: 6/21/2016 2:28:03 PM
Sub tasks:
Completed:
Add "More..."
Yes
Add "Open Classic Online Activation Screen..."
Yes
Dirk Cleff 2/10/2016
lic2
lic1

TR-02083 (Finished)
Created by: HRI
Last change: 6/21/2016 2:28:03 PM
TR-02117 (Finished)
Created by: AF
Last change: 6/21/2016 2:28:03 PM
TR-02069 (Finished)
Created by: AF
Last change: 6/21/2016 2:28:03 PM

LD_16_00_0187
Version 2016 update of 7. March. 2016

TR-01984 (Finished)
Created by: AF
Last change: 6/21/2016 2:28:03 PM
Sub tasks:
Completed:
USERC_MF_RID will be resolved at runtime to MF_DESC
No
USERC_DESC goes to Revit-"Model"
No
USERC_SUB_DESC goes to Revit-"Type Comments"
No
Andreas Fleischmann 2/10/2016
2016-02-10_12-36-18
2016-02-10_12-36-05
TR-02034 (Finished)
Created by: AF
Last change: 6/21/2016 2:28:03 PM

For drawing full automation, sometimes the complete XML file is stored in one LDXStorage objects.
These values with more than 32.000 characters are no more exported into the LDBIM file. This usually does not cause any issues to the LDBIM export.

LD_16_00_0183
Version 2016 update of 25. Feb. 2016

TR-01060 (Finished)
Created by: AF
Last change: 10/26/2016 4:47:00 PM

The 3D DWG export now supports transparency. As a result glass doors, cabins and escalator balustrades look much better in Autodesk Revit in case it is imported as ldbim file.

Andreas Fleischmann 2/5/2016
2016-02-02_10-25-33
TR-01677 (Finished)
Created by: NM
Last change: 2/5/2016 4:04:07 PM

Add new Manufacturer Dialog in Data Manager

Adding a new manufacturer to the DigiPara Liftdesigner database is now easier.
See also:
http://digiparasoftware.de/Portals/0/MC/WEB-EN/Default.htm#DP/LD/DB/PL/01_PrepSteps/PL_02_MfMod.htm

Andreas Fleischmann 2/5/2016
MF Step 2
TR-01589 (Finished)
Created by: AF
Last change: 2/8/2016 5:10:21 PM
TR-01590 (Finished)
Created by: AF
Last change: 2/8/2016 5:10:21 PM
TR-01658 (Finished)
Created by: AF
Last change: 1/5/2016 9:46:53 AM

Show 2 addtional lines like this:


Codes must look like this:
ALBENMUHENDISLIK:MODULE:?????-?????-?????-?????-??????

TR-01697 (Finished)
Created by: NM
Last change: 1/5/2016 9:46:53 AM

wenn man copy components macht, wird die PGD_DESC nicht weitergeführt. Da wird dann die PGGRP nur kopiert

Nikolaj Merzlikin 10/23/2015
CopyCompBug
TR-01663 (Finished)
Created by: KN
Last change: 2/8/2016 5:10:21 PM

Formatierung von stacked dimenison in dwg wird nach dwg Import in Liftdesigner nicht korrekt angezeigt

TR-02177 (Finished)
Created by: MM
Last change: 6/21/2016 2:28:03 PM

Can be placed by modifying the force's DX property.

Manuel Moos 5/30/2016
done
outside
TR-01632 (Finished)
Created by: MM
Last change: 1/5/2016 9:46:53 AM
TR-01972 (Finished)
Created by: AF
Last change: 2/8/2016 5:10:21 PM
Nikolaj Merzlikin 2/1/2016
Error_Excel_Export
TR-01939 (Finished)
Created by: AF
Last change: 2/8/2016 5:10:21 PM
TR-01947 (Finished)
Created by: AF
Last change: 2/8/2016 5:10:21 PM

The xls export now also works for xlsx files. It has completely developed new. It does not use Excel COM Automation any more. Therefore no Excel installation is required for creating xls files.
Excel is still required if you want to view and modify the results.

TR-00914 (Finished)
Created by: AG
Last change: 10/26/2016 4:47:00 PM
Sub tasks:
Completed:
General Additional Objects
Yes
Additional Child Objects
Yes
Additional Wall Openings
Yes
Additional Wall Segments
Yes
Kontrolle Übersetzung Cindy
Yes

TR-00888 (Finished)
Created by: AG
Last change: 10/26/2016 4:47:00 PM

Windows Application -> Quicktour

Sub tasks:
Completed:
Step 1: Main Project Information
Yes
Step 2: Building Data
Yes
Step 3: Main Requirements
Yes
Step 4: Elevator Characteristics
Yes
Step 5: Load Sheet Template
Yes
Kontrolle Übersetzung Cindy
Yes

TR-00889 (Finished)
Created by: AG
Last change: 10/26/2016 4:47:00 PM

Windows Application -> Reference -> User Interface

Sub tasks:
Completed:
Kontrolle Übersetzung Cindy
Yes
Group Configuration
Yes
Machine Room
Yes
Materials Configurator - Shaft Walls
Yes
Materials Configurator - Pit & Ceiling
Yes
Materials Configurator - Floor Levels
Yes
Materials Configurator - MR Walls
Yes
Materials Configurator - Preferences
Yes
Floor Levels - Add or remove Floor
Yes
Floor Levels - Designation Change
Yes
Floor Levels - Edit Level or Floor To Floor Distance
Yes
Floor Levels - Add or remove Entries
Yes
Floor Levels - Designation Rear Change
Yes
Floor Levels - Change Pit and Headroom
Yes

TR-00962 (Finished)
Created by: AG
Last change: 10/26/2016 4:47:00 PM
Sub tasks:
Completed:
Product Activation Process
Yes
New Shaft Wizard
Yes
Group & Shaft Configuration
Yes
Additional Objects
Yes
DigiPara Licensing
Yes
LinkedIn
Yes

TR-00052 (Finished)
Created by: AF
Last change: 10/26/2016 4:47:00 PM
Andreas Fleischmann 6/15/2015
2015-06-15_10-40-10
2015-06-15_10-40-01
TR-01626 (Finished)
Created by: AF
Last change: 2/8/2016 5:10:21 PM
Andreas Fleischmann 10/5/2015
2015-10-05_09-21-02
TR-01879 (Finished)
Created by: AF
Last change: 8/12/2016 9:13:08 AM

In case you press a green button, the view frame is not properly updated.
Instead the car is moved to the default down position
"Calculate Model" fixes the problem
Please also check for 2016.0

Andreas Fleischmann 12/8/2015
2015-12-08_09-50-45

LD_16_00_0151
Version 2016 update of 13.Oct 2015

TR-01581 (Finished)
Created by: HRI
Last change: 1/2/2016 6:05:50 PM

"<>" dim value placeholder won't get exported when using this prefix:
<>{\H0.7x;\S+5^-5;}
Instead the text override gets the real value (see screenshots).

This problem has been fixed. We disabled a special Autocad work arround.

Background:
-----------------
Problem was this sequence:
....<>....\S...^...;

Due to an Autocad error in early Autocad versions (I have not checked which versions), the "<>" was not properly interpreted in Autocad and led to a wrong display.
Therefore the developers implemented a work arround. I tested with Autocad 2015 and the work arround seems no more required.

Heiko Richter 9/14/2015
ld-dim-prefix
acad-text-override
TR-01567 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

In case the new BT elevator is choosen, the cabin approval drawaing shows some worng elements in the cabin sections ( CWT guard, or similar)

Please improve the view frames

TR-01595 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Problem:
Even all are using the same source PG_GRP, all targets have a different one. That is wrong.

Take care: the source records may have some different and some similar PG_GRPs

Andreas Fleischmann 9/18/2015
CopiedData
Source Data
TR-01603 (Finished)
Created by: NM
Last change: 1/2/2016 6:05:50 PM

After Component changed in Tree View 3D View zoom is False

TR-01622 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

MTEXT (dimension text) like this caused an excpetion and crashed LD:

<>{\H0.7x;\S^-5;}

The problem is this seqeunce "....\S^....;"

A work arround could be a blank between \s and the ^ character.

TR-01656 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

LD_16_00_0145
2016 fix of 17.9.2015

TR-01588 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

The following cpolumns were missing in the L_RopeTab:
RP_PG_GRP
RP_PART_NO
RP_USER_PG_50..69

Due to this error, user defined rope outlines were not visible.
It is also important to understand that upgraded ldm -> ldm12 files will not contain the content of these columns.

Andreas Fleischmann 9/16/2015
MissingColumnsInSchindlerSample
TR-01586 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
Andreas Fleischmann 9/15/2015
2015-09-15_17-04-22

LD_16_00_0144
2016 fix of 15.9.2015

TR-01553 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

in case this node is opened during the door selection, an error is thrown in the event log.

Andreas Fleischmann 8/31/2015
2015-08-31_15-46-10
TR-01125 (Finished)
Created by: AF
Last change: 10/12/2016 10:59:15 AM

DER MR soll in den Bildern nicht gezeigt werden

Andreas Fleischmann 6/15/2015
2015-06-15_12-54-46
TR-01129 (Finished)
Created by: KN
Last change: 10/26/2016 4:47:00 PM

Beim hin- und herschalten wird der Maschinenraum jedes mal um den Faktor der Schachtanzahl in Bank 1 größer. Autom. Aufruf von "Calculate machine room size" beim Setzten der Option wäre sinnvoll. Zudem wäre es schön, wenn die Maschinenräume beim zurücksetzen der Option wieder autom. auf die Korrekte Größe und die richtige Lage zurückgesetzt werden würden.

TR-01584 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
Andreas Fleischmann 9/15/2015
Base object is shown
TR-01466 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Problem is that [0361] TM Z-Position is not handled properly.
"Rel to headroom", means the headroom of the current shaft (instade shaft0)

Andreas Fleischmann 8/6/2015
2015-08-06_08-58-14
gearPositionOK
gearPositionWorng
TR-01275 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
Nikolaj Merzlikin 7/15/2015
15.07
Andreas Fleischmann 7/10/2015
2015-07-10_09-48-28
2015-07-10_09-46-31
TR-01102 (Finished)
Created by: KN
Last change: 10/12/2016 10:59:20 AM

kann nicht gelöscht werden in Additional Openings Window

TR-01188 (Finished)
Created by: AF
Last change: 10/12/2016 10:57:58 AM

ich habe holes am CF und am TC
Beide werden nicht richtig in der Breite berechnet.
(Ich wollte volle Breite)

Manuel Moos 6/17/2015
TC_Richtig
TC_Falsch
CF_Richtig
CF_Falsch
TR-01366 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Can you please setup the default cabin position to the predefined location "Bottom service floor"

Additionally the value for [0209] Location seems to be wrong (should be -200)

Andreas Fleischmann 7/22/2015
2015-07-22_15-00-51
TR-01468 (Finished)
Created by: MM
Last change: 1/2/2016 6:05:50 PM

The fix for TR-01466 in CS 21693 had side effects on the default configuration of gear in the machine room for nonzero shaft z0.

Root cause is that the gear's m_pRoot is interpreted differently depending on mode flags.

Manuel Moos 8/6/2015
gearpos
TR-01059 (Finished)
Created by: AF
Last change: 10/12/2016 11:04:02 AM
TR-01178 (Finished)
Created by: AF
Last change: 10/12/2016 10:58:02 AM
TR-01078 (Finished)
Created by: AF
Last change: 10/12/2016 11:03:58 AM
TR-01101 (Finished)
Created by: KN
Last change: 10/12/2016 11:03:48 AM

Wenn Gruppen angelegt sind und der Aufzugname sehr lang ist, dann werden die Schächte im Dialog unschön auseinandergezogen. siehe angehangenes Bild

Kai Nitz 6/10/2015
ShaftGroupWallMaterials

LD_16_00_0134
2016 Update Release of 27.7.2015

TR-01273 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Hier gibt es noch ein Problem in der Darstellung

SalesForceAdmin 7/14/2015
r
Andreas Fleischmann 7/9/2015
2015-07-09_09-54-55
TR-01302 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Ich glaube hier gibt es ein Problem.
Der gezeigte Schalter im property grid scheint nichts zu bewirken.
Aktuell (meine ich mich zu erinnern) müsste er das eingekreiste "Hole1." ausschalten.
Kannst Du bitte überprüfen, was der Schalter implementiert und ob irgendwas falsch funktioniert?
Danke

Andreas Fleischmann 7/15/2015
2015-07-15_09-01-28
TR-01276 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
Andreas Fleischmann 7/10/2015
2015-07-10_10-20-41
TR-01209 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Keys sind hier:
dcc settings
2015 löscht bestimmte Einträge aus dcc
etc sind alle 0


--->>>>>
Gut wäre es, wenn wir uns die Einstellungen so merken würden, das die 2015 diese nicht löscht.
2015 darf natürlich auch dadurch nicht gestört werden.

Andreas Fleischmann 6/26/2015
2015-06-26_09-59-29
TR-01201 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
TR-01279 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Additional Parameters are required for some component types:

The following parameters are already in use:#define COMP_H_PROFILE_PARAMETER 96
#define COMP_L_PROFILE_PARAMETER 97
#define COMP_B_PROFILE_PARAMETER 98


For car frame:
[70]....[78] is already in use, even no PG Table values exists therefore

Sub tasks:
Completed:
AcBufferTab, 75-95 !!
Yes
AcCarFrameDimTab, 79-95 !!
Yes
AcCWDimTab,70-95
Yes
AcGearFrameTab, 70-95
Yes
AcCarPlatformTab, 79-95 !!
Yes
AcRopeCompensationUnitTab, 70-95
Yes
AcGearPerformanceTab, 70-95
Yes
AcDoorDimTab, 70-95
Yes
AcUserCompTab, 70-95
Yes

TR-01199 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Nach dem Ändern der Serienummer wird im UI immer nopch die alte SN und Conbtract expiration angezeigt. Bitte UI refreshen.


Nach dem Neustart ist allerdings alles OK.

Andreas Fleischmann 6/24/2015
2015-06-24_13-26-49
TR-01237 (Finished)
Created by: KN
Last change: 1/2/2016 6:05:50 PM

Wir brauchen eine neuen Mode der es möglich macht die Std.-Kabinengeometrie global auszuschalten, wenn Kabinendesign verwendet wird. Fehlt schon länger

Sub tasks:
Completed:
Implement carmDoNotDrawCarWalls
No
Implement carmDoNotDrawCarFloor
No

TR-01204 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

vermute mal wieder ein Dotfuscator Problem ....

Andreas Fleischmann 6/25/2015
2015-06-25_09-32-18
TR-01063 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
Sub tasks:
Completed:
System zu langsam (Rücksprache bitte)
No
Was ist wenn SF nicht erreicht werden kann?
No
"Retry" Möglichkeit, wenn kein code generiert wurde
No

TR-01272 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Werte der Hole-Position (Shaft0.Entries2.E0.Panel1.Hole0.DIM104 / Shaft0.Entries2.E0.Panel1.Hole0.DIM101) sind für die hinteren Zugänge vertauscht

Dieser Fehler sollte auch in der 2015er Version gefixt werden (TKAW issue).

Hall display hole position values (Shaft0.Entries2.E0.Panel1.Hole0.DIM104 / Shaft0.Entries2.E0.Panel1.Hole0.DIM101) have been swaped by mistake for the rear entrances.

TR-01215 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

zb:
C:\ProgramData\Schindler\CAD\SchindlerDraw\LiftDesigner_4\blocks\WIF\LD-9300AE\SDEsc_Tabelle_Transportmaße_1.dxf

Der Fehler ist wahrscheinlich nicht schindlerspezifisch, aber die DXF wird einfach nur als graue Fläche angezeigt.

Andreas Fleischmann 6/26/2015
2015-06-26_12-26-58
TR-01213 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Irgendwie wird hier was falsches angezeigt:
Oben steht 186 messages...OK
2057: 1 translation ..... OK

Finished exporting 1 messages... FALSCH


Was soll hier stehen? ist das die anzahl der messages oder translations?
bei Translations: wird die Anzahl aller translations ( verschiedene Sprache) addiert?

Andreas Fleischmann 6/26/2015
2015-06-26_11-33-40
TR-01228 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

der gezeigte wert muss in dieser einstellung editierbar sein.
Alle anderen Level müssen sich dann daraus berechnen

Andreas Fleischmann 7/3/2015
2015-07-03_11-44-53
TR-01217 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Problem: In 2016 ist der finished floor vorhanden, in 2015 nicht.
Offensichtlich wurde in 2015 der Default von 50mm, irgendwie nicht benutzt.
(War die defaulthöhe vielleicht irgendwo in der ini / dcc)?

Andreas Fleischmann 6/26/2015
In2016
In2015
TR-01214 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
Andreas Fleischmann 6/26/2015
2015-06-26_11-38-36
TR-01200 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
TR-01226 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
Andreas Fleischmann 7/3/2015
2015-07-03_11-02-02
TR-01207 (Finished)
Created by: DC
Last change: 1/2/2016 6:05:50 PM

zB wird der Verifizierungsschlüssel in der gleichen Zeile wie ---BEGIN VERIFICATION CODE--- dargestellt.

TR-01216 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Sind einige oder alle Module "Invalid" soll an den gezeigten (oder bisherigen) Stellen ein Fehler gezeigt werden ( Im Kreis steht die Anzahl der Invalid Module)

Siehe auch Checklist!

Sub tasks:
Completed:
Hinter "View Modules...." auf dem Licensing Startscreen anzeigen
Yes
Auf der "Startseite" anzeigen (erweiterter Text bei onhover auf dem Warn Symbol)
Yes
Andreas Fleischmann 6/26/2015
2015-06-26_13-38-52

TR-01202 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
TR-01205 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Nikolaj: Sandra hat am 19.6.15 neue Bilder gemacht. Ich habe sie dir am 25.6. gechickt.
danke

Andreas Fleischmann 6/25/2015
2015-06-25_13-04-11
TR-01211 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

a) ich habe 2016.125 installiert, aktiviert (1day) und benutzt ( alles vor 2 tagen)

b) ich habe 2016.126 installiert
c) im Rahmen der 2016.126 Installation fragt man mich nach der UI Sprache,
dann, und das ist - die Frage / das Problem -
sagt mir das System, das die Lizenz ungültig ist, ich muss die SN neu eingeben ( wird vorgeschlagen) , Rechner aktivieren und Duration neu angeben

Eigentlich nur 4 x Next, aber trotzdem: Kann man diese Fragen in diesem Falls (wenn alles vorliegt) auslassen und direkt aktivieren bitte?

TR-01439 (Finished)
Created by: MM
Last change: 1/2/2016 6:05:50 PM

Borked, see

http://192.168.1.146/LDAWP_DrawingGenerationApp/%28S%28pqfesqjwwcdznindxaddwamx%29%29/DrawingGeneration/Index/?XML=A60_3_13m.xml&MODEL=CIBESA60&LCID=2057

LD_16_00_0122
2016 FCS release, 18.6.2015

TR-00280 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Nach dem Erstellen einen gruppe mit 2 aufzügen, face2face arrangement, ist die automatische gruppenschachtöffnung noch da.

Ich denke beim Verschieben der Aufzüge (im neuen face2face automatik-Modus), sollten wir diese Öffnungen an den betroffenen Aufzügen selber kontrollieren ( add/remove)

Andreas Fleischmann 9/19/2014
2014-09-19_11-27-12
TR-00832 (Finished)
Created by: KN
Last change: 10/12/2016 11:09:35 AM

Es wird das falsche Heber Image angezeigt, hier stimmt irgendetwas mit den Ressource Files nicht -> Das richtige Image wird angezeigt wenn User defined gewählt wird.

Kai Nitz 4/13/2015
EN81Hydr
TR-00833 (Finished)
Created by: KN
Last change: 10/12/2016 11:09:32 AM

Grooving Consideration zeigt das Semi-Circular Image mit undercut nicht mehr an, hier stimmt irgendetwas mit den Ressource Files nicht.

Kai Nitz 4/13/2015
EN81Seil
TR-00938 (Finished)
Created by: NM
Last change: 1/2/2016 6:05:50 PM

New Doccking Window with Breadcrumb in LD

Sub tasks:
Completed:
1) Ist fertig. Warte auf weitere Spezificationen
No

TR-00139 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
TR-00785 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Hier kommt eine alte verwirrende Meldung.
Bitte wie im LD lösen

Andreas Fleischmann 3/30/2015
2015-03-30_13-52-44
TR-00877 (Finished)
Created by: KN
Last change: 10/12/2016 11:08:43 AM

Bei den Dutytables muss zwingend in der
L_DTColTab, L_DTColDwgDimTab, L_DTColDwgHorTab immer die Id des entsprechenden Verknüpfungs-Datensatzes eingetragen werden, bevor ein neuer Datensatz angelegt werden kann. Das Verhalten im Fehlerfall ist recht unglücklich.

TR-00784 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Der derzeitige default folder ist total unbrauchbar.
Er liegt unter "ProgramData". Dieser Folder ist aber normalerweise unsichtbar, also für den Anwender nicht anklickbar.
LD3 Dokumente sollen als default nach:
C:\Users\Build\Documents\DigiPara

Danke

Andreas Fleischmann 3/30/2015
2015-03-30_14-03-01
TR-00749 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
TR-00235 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
Sub tasks:
Completed:
Group Elevatro & Shaft Confurator
Yes
How to add a beam to a rail bracket
Yes
How to add beams to landings doors
Yes
Shaft material settings at anchor rails
Yes

TR-00996 (Finished)
Created by: AF
Last change: 10/12/2016 11:05:02 AM
Sub tasks:
Completed:
1) Ist fertig, aber noch nicht getestet.
Yes
Andreas Fleischmann 5/22/2015
2015-05-22_09-50-39

TR-00868 (Finished)
Created by: KN
Last change: 10/12/2016 11:09:06 AM

Progressbar läuft bei jedem Aufruf des Dialogs

TR-00263 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

ld3 is attached

Andreas Fleischmann 9/10/2014
2014-09-10_13-24-05
TR-00873 (Finished)
Created by: KN
Last change: 10/12/2016 11:09:00 AM

Es werden immer noch die V5 Icons angezeigt, nicht die neuen (bereits seit 2014er Version)

TR-00716 (Finished)
Created by: MM
Last change: 1/2/2016 6:05:50 PM
TaskRay Task (Finished)
Created by: NM
Last change: 1/2/2016 6:05:50 PM

Fix for LD Tabs MF_RID

TR-00897 (Finished)
Created by: KN
Last change: 10/12/2016 11:05:38 AM

Das Eingabefeld verschiebt sich wenn unterschiedlich lange Übersetzungen über die Message Tabelle kommen

TR-00812 (Finished)
Created by: AF
Last change: 10/12/2016 11:09:37 AM

Irgendwie werden die globalen dimchain und globalen dimension prefixe nicht gespeichert.
Nach dem LD restart sind sie weg.

TR-00883 (Finished)
Created by: AF
Last change: 10/12/2016 11:08:37 AM

draggen auf "new shaft" sollte sofort die änderungs zeigen, nicht nur bei der hälfte

TR-00884 (Finished)
Created by: AF
Last change: 10/12/2016 11:08:34 AM

PL8 wird hinter PL4 geschoben ( siehe image)
ergebnis: PL8 VOR PL4
LD3 auch attached

Andreas Fleischmann 4/24/2015
PL8 must be behind PL4
drag operation
TR-00882 (Finished)
Created by: AF
Last change: 10/12/2016 11:08:40 AM

Rename geht nicht.
Versuche mal "LIFT PL1" nach "LIFT PL2" umzubenennen.
Man muss alles neu eintippen, weil es keinen editcursor gibt

Andreas Fleischmann 4/24/2015
2015-04-24_13-47-55
TR-00893 (Finished)
Created by: AG
Last change: 10/12/2016 11:08:25 AM

adjust headroom height and pit for all shafts

Alexandra Göttert 4/29/2015
Headroom
TR-00876 (Finished)
Created by: AG
Last change: 10/12/2016 11:08:54 AM
Alexandra Göttert 4/23/2015
2015-04-23_15-16-41
TR-00875 (Finished)
Created by: KN
Last change: 10/12/2016 11:08:57 AM

Expand All Funktion / Preference für Aufzugspalten wäre wünschenswert

TaskRay Task (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
TR-00816 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
TR-00746 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Fehler tritt mit der 2015 Version auf, 2016 habe ich nicht getestet.

TR-00885 (Finished)
Created by: KN
Last change: 10/12/2016 11:08:31 AM

Sowohl in der Dotfuscateten als auch in der Nicht-Dotfuscateten Version

TR-00887 (Finished)
Created by: AG
Last change: 10/12/2016 11:08:28 AM

Change Material Height to 0 in a gray box, if Material Classic.
Adjust values and definitions in the gray boxes.

TR-00068 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
TR-00844 (Finished)
Created by: AF
Last change: 10/12/2016 11:09:29 AM

Technologie "WPF"
Modeless, und Docking

Andreas Fleischmann 4/13/2015
AdditionaObjects
TR-00910 (Finished)
Created by: KN
Last change: 10/12/2016 11:05:34 AM

Jetzt haben wir zwar eine neuen Default Project Path, aber die installierten Bsp. Projekte liegen immer noch unter "Datapool\Project \Samples"

TaskRay Task (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
TR-00845 (Finished)
Created by: AF
Last change: 10/12/2016 11:09:26 AM

komplett löschen oder "Hidden "machen

TR-00846 (Finished)
Created by: AF
Last change: 10/12/2016 11:09:24 AM

- Options & Rules should become a separate docking window.
- Also remove the top tab control from the property grid dialog box

Sub tasks:
Completed:
Make Options & Rules a separate docking window
Yes
Add a new button to "Start->Windows->Options&Rules" (small button)
Yes
Remove the top tab contraol from Standard Property grid docking window
Yes

TR-00766 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
Andreas Fleischmann 3/26/2015
2015-03-26_11-16-21
TR-00160 (Finished)
Created by: NM
Last change: 10/12/2016 11:23:03 AM

RevisionList Login

TR-00872 (Finished)
Created by: KN
Last change: 10/12/2016 11:09:02 AM

Exception kommt nur im Inventor im standalone LD alles normal

TR-00729 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM
TR-00624 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Schindler EBIKON (Bucher/Petzke): Wir benötigen noch Panel5. und Panel6.

TR-00867 (Finished)
Created by: KN
Last change: 10/12/2016 11:09:11 AM

Start Screen schließt sich nicht (nur beim ersten LD Start und erstem Laden des Startscreens)

TR-00781 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

nach der ersten benutzung nach der neuinstallation kam das heraus:

Es sieht so aus, als wären die beiden angezeigten Floors bzw Levels nicht verwendet worden
FLL count = 0 etc

Andreas Fleischmann 3/30/2015
2015-03-30_13-45-20
TR-00782 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

Default window size muss so sein, dass alles sichtbar ist
Im Schritt 3 oder 4 musste ich das Window nochmal vergrößern.

Andreas Fleischmann 3/30/2015
2015-03-30_13-43-48
TaskRay Task (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

LD_15_00_0210
Bugfixes

TR-00728 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:50 PM

ldm12 files are imported from the "Import" data pool folder. After importing a file with the extension SQL is created and set to the same date/time.
If the date/time is different, the file will be imported again, during the next import check.

Andreas Fleischmann 3/16/2015
2015-03-16_10-29-11

LD_15_00_0103
Hotfix Version

TaskRay Task (Finished)
Created by: MM
Last change: 1/2/2016 6:05:50 PM

Harte LiftDesigner crashes sollten eine Art debug-dump liefern, das uns bei der Fehlersuche hilt.

TR-00007 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:40 PM

The location of the safety gear dimensioning has been improved

Andreas Fleischmann 7/18/2014
SG
TR-00127 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:40 PM

Hole that are assigned to the giudes list were sometimes not properly displayed in the M/R plan. This problem has been resolved.

LD_15_00_0097
Release from 25. June 2014

TR-00030 (Finished)
Created by: AF
Last change: 1/2/2016 6:05:54 PM
TaskRay Task (Finished)
Created by: NM
Last change: 1/2/2016 6:05:54 PM

Eine Cleanup Funktion im datamanager, die der überflüssige Profilgruppen identifiziert und löscht.

TaskRay Task (Finished)
Created by: AF
Last change: 1/2/2016 6:05:52 PM
TaskRay Task (Finished)
Created by: AF
Last change: 1/2/2016 6:05:54 PM
TaskRay Task (Finished)
Created by: AF
Last change: 10/12/2016 11:21:45 AM
Created date
Description
File name
12/12/2018
DigiPara Liftdesigner 2018 Installation (Version 2018.0.203)
12/6/2018
Previous DigiPara Liftdesigner 2018 Installation (Version 2018.0.201)
9/28/2018
Latest DigiPara Liftdesigner 2016 Installation (Version 2016.0.268)
8/30/2018
DigiPara Liftdesigner 2017 Installation (Version 2017.0.311)
3/19/2015
Latest DigiPara Liftdesigner 2015 Installation (Version 2015.0.210)