DigiPara Elevatorarchitect
Here you will find the latest information about DigiPara Elevatorarchitect.
Downloads will be available through:
https://www.digipara.com/downloads/free-digipara-elevatorarchitect/
- Changes
EAR_22_00_0117
Available via automatic update. (Released in June 9th 2021)
Last change: 9/27/2021 2:29:45 PM
EAR_21_00_0208
Available via automatic update. (Released in June 10th 2021)
Last change: 9/27/2021 2:27:16 PM
EAR_21_00_0064
Available via automatic update. (Released in March 17th 2020)
Last change: 9/27/2021 2:27:33 PM
EAR_20_00_0240
Available via automatic update. (Released September 13th 2019)
Last change: 4/22/2020 2:37:28 PM
The attached export contains four paremeters with empty string value of all Project/Shared Instance/Type combinations. They all should be created on import.
Last change: 4/22/2020 2:37:28 PM
The attached ldBIM file only has the shaft, the hole of the machine room ventilation window and the car door as individual objects. In the selection tree, the intermediate objects in the hierarchy (LDXCar, LDXMachineRoom, LDXVentilationWindow) also appear and can be deactivated. The deactivation has no effect.
Last change: 4/22/2020 2:37:28 PM
The attached MinBim ldbim file has almost all geometry in the LDXDocument node (BIM Properties for everything were disabled in LD). The class selection tree only allows to switch the main shaft hole, the LDXDocument geometry is always imported.
Worse is the MinBim_withshaft ldbim file; there the class selection tree is completely empty.
Last change: 4/22/2020 2:37:28 PM
Steps to reproduce:
Do a ldBIM import with a file produced in LD 2018 or earlier
When done, with the import selected, pick "Refresh in Revit" from the top or "BIM Model Settings" below
Click through the file selection step
The component counts will have question marks beside them (see screenshots) even though the file and therefore the count should be known precisely at this point
EAR_20_00_0192
Available via automatic update. (Released in May 10th 2019)
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
Lowest floor not used (may not be a bug)
Cutout too low relative to other elements
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
Ribbongroup "DigiPara"
Kommando 1: "DigiPara Elevatorarchitect"
Kommando 2: "Refresh in Revit"
ähnlich:
https://www.digipara.com/Portals/0/MC/WEB-EN/Content/Resources/Images/EA/UsingEA/01_StartProgram/StartProgram_01.png
EAR_18_00_0194
Available via automatic update. (Released in October 25th 2018)
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
EA Added xtceaBimExchangeComponent.LdxTreeName from new import so we no longer have to guess it from the filename (which is now free to change). Of course, if it is not explicitly set, it is guessed from the filename.
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
EA use LdxTreeName instead of guessing from the filename for door processing.
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
Project "Client.Eax.Tk_ET_EA_Evo YN " Remove YN calculation for Evo100, Evo200 and Evo300
EAR_18_00_0131
Available via automatic update. (Released May 22nd 2018)
Last change: 4/22/2020 2:37:28 PM
In case you have a new project, no escalator can be created
In case you have any elevator inserted, adding an escalator works as well.
EAR_18_00_0120
Available via automatic update. (Released in April 25th 2018)
Last change: 4/22/2020 2:37:28 PM
EAR_18_00_0076
Available via automatic update. (Released in February 26th 2018)
Last change: 4/22/2020 2:37:28 PM
An EA LDBIM import can occur that foreign escalators and elevators will show the wrong supplier logo and salesrep.
EAR_18_00_0044
Available via automatic update. (Released in October 17th 2017)
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
Global revit version seems to be set to 2018 from xtearWorker.SaveProjectActions when ProductActivationCommon.SaveProjectActions is actually called.
Last change: 4/22/2020 2:37:28 PM
EAR_17_00_0135
Available via automatic update. (Released in 27.Sep 2016)
Last change: 3/28/2020 12:34:41 PM
Add Vertical Rise und Horizontal Length MIN Filters
Last change: 3/28/2020 12:23:12 PM
Last change: 3/28/2020 12:34:41 PM
EAR_17_00_0131
Available via automatic update. (Released in 22.Sep 2016)
Last change: 3/28/2020 12:23:12 PM
sowohl bei elevato als auch escalator
Last change: 3/28/2020 12:23:12 PM
Wenn man nur die BIM Model settings ändert, dann back, dann "Refresh All in Revit", werden die 3D BIM Modelle nicht neu erstellt. Das ist falsch, die BIM Modelle müssen neu abgeholt werden.
Last change: 3/28/2020 12:34:41 PM
Last change: 3/28/2020 12:34:41 PM
Last change: 3/28/2020 12:34:41 PM
Last change: 3/28/2020 12:34:41 PM
Last change: 3/28/2020 12:34:41 PM
Last change: 3/28/2020 12:23:12 PM
Bei OnMouseOver habe ich es nicht geschafft den Tooltip in Ruhe zu lesen bevor er wieder verschwunden ist.
Last change: 3/28/2020 12:23:12 PM
Last change: 3/28/2020 12:23:12 PM
In den "BIM Model settings".
Wenn man den Knopf drückt, werden die aktuellen gesetzten Einstellungen für alle MW/Escalators verwendet.
Nicht für die Elevator setzen, das kommt später.
Aus "Save as standard" wird "Use these settings for new escalators"
Last change: 3/28/2020 12:34:41 PM
Last change: 3/28/2020 12:34:41 PM
EAR_17_00_0076
Available via automatic update. (Released in 5. July 2016)
Last change: 3/28/2020 12:34:41 PM
Updater for DigiPara Elevatorarchitect Library
downloads now from download.digipara.com.
Last change: 3/28/2020 12:34:41 PM
The latest DigiPara Elevatorarchitect news are shown within the start screen.
Last change: 3/28/2020 12:34:41 PM
EAR_16_00_0200
Available via automatic update. (Released in 20. April 2016)
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
Wall openings might exist in several places, like:
- Door wallopenings
- Opening for controller box
- door pockets inside the shaft wall
- ventilations, etc.
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
For many components it is possible to choose which objects needs import more detailed.
Last change: 4/22/2020 2:37:28 PM
It is now possible to save Import Selections. Moreover there are 3 default Selections "LOD100" "LOD300" and "Escalators"
Use "Escalators" in case the LDBIM file conatins an escalator, moving walk or ramp.
Last change: 4/22/2020 2:37:28 PM
There are several enhancements for escalators:
a) Escalators now have transparent glass balustrades
b) The required openings in the floorings are displayed. This allows to easily add Revit shaft openigs
Last change: 4/22/2020 2:37:28 PM
The door frame width right, left and on top is now more flexible.
EA now supports DD_Z_X2, DD_Z_X5 and DT_K.
See also:
http://http://www.digipara.com/Portals/0/MC/WEB-EN/Default.htm#DP/FIND/DB/ProductLoading/PL_Entrances.htm
Last change: 4/22/2020 2:37:28 PM
Door frame width (DT_X2, DT_X5) and door frame height (DT_K) are mapped for 2016 families.
Last change: 4/22/2020 2:37:28 PM
New text must be:
"New LDBIM Import (from DigiPara Liftdesigner)"
EAR_16_00_0148
Available via automatic update. (Released in 1. Oct 2015)
Last change: 4/22/2020 2:37:28 PM
Add TK Elevator, simple BIM
Add BIM import elevator, select faulty OTIS ldBIM
Abort
Try to switch TK to full BIM, gives error from re-trying to unpack the OTIS BIM
Last change: 4/22/2020 2:37:28 PM
Last change: 11/12/2022 12:10:43 PM
Last change: 11/12/2022 12:10:43 PM
The Shaft opening must have same size as the dashed shaft size symbol, not larger.
The width will be added later by the wall openings, similar to LD.
The height seems simply to be wrong.
Sample files at:
M:\TMP\TaskRay\TR-01569
EAR_16_00_0143
Available via automatic update. (Released in Sep 2015)
Last change: 4/22/2020 2:37:28 PM
LDBIM in der Anlage, Es reicht zum Testen aus wenn Du LDXUserComp importierst
Es sollte ein Fehler gezeigt werden, und das fehlerhafte DWG übersprungen werden.
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
The insertion symbol must be related to the corresponding floor, in this example the "Ground Level".
Wrongly it is placed at "Basement1"
Last change: 4/22/2020 2:37:28 PM
The insertion symbol sometimes switched to 0 degrees, during reimport etc.
I was NOT able to clearly reproduce this issue
Same files as TR-01532
files at M:\TMP\TaskRay\TR-01532
Last change: 4/22/2020 2:37:28 PM
EAR_16_00_0140
Available via automatic update. (Released August 18, 2015)
Last change: 10/12/2016 9:06:53 AM
Nachdem der EA Lizenzdialog geöffnet wird , kann dieser nur wieder über "Abbrechen" geschlossen werden, was autom. den EA Main Dialog mit schließt.
Siehe angehangener Screenshot
Last change: 10/12/2016 9:06:56 AM
Wenn die EA Lizenz abgelaufen ist wird nach Anforderung der neuen Seriennummer und Eintragen der selben im Lizenzdialog der "Weiter" Button nicht aktiviert. Bei Bestätigung der Seriennummer via "Enter" geht es weiter.
Last change: 1/2/2016 5:05:54 PM
This problem has been fixed
This problem has been fixed.
Last change: 10/12/2016 9:06:40 AM
Ich vermute mal, dass ist viel mehr eine AWP Frage.
Was ist, wenn AWP kein Model erzeugt. Wie werden die Errors sauber nach EA durchgeschliffen?
Beispiel: 100 Floors mit TKAW
Last change: 10/12/2016 9:06:46 AM
Last change: 10/12/2016 9:06:43 AM
Level 5 (ca 5m) wurde als letztes eingefügt:
Problem 1:
Der Level wird nicht angezeigt in der Liste (ist hier vielleciht ein Problem mit der synch. zwischen TP und EAX). das hat eigentlich immer super funktioniert
Problem 2:
Level 5 wird in der Auswahl-Combo ÜBER L3 (18m) angezeigt
datei unter:
m:\tmp\level5.rvt
Last change: 11/12/2022 12:10:43 PM
Der erste Updatevorgang bricht nach 4% ab und muss neu gestartet werden.
Das Projekt hat mehrere Level auf Etage 0 und 1.
D:\Tmp\Moos\Revit2012\100_Floors
EAR_16_00_0125
Initial Version 2016 for Autodesk Revit 2016.
Last change: 4/22/2020 2:37:28 PM
.... wenn man vorher in "Configuration" war. Kommt man aus dem Startmenu ist alles Ok
Last change: 4/22/2020 2:37:28 PM
Last change: 4/22/2020 2:37:28 PM
Können wir hier bitte ein Bild und Text anzeigen.
Bitte dann nach 16.0 mergen und neu publishen.
Danke
Last change: 3/28/2020 12:20:01 PM
6/16/2015-5:11:00 PM earuMain.UpdatePackages started
6/16/2015-5:11:00 PM earuMain.StartUpdater started
6/16/2015-5:11:00 PM earuMain.GetExternalObject started
6/16/2015-5:11:08 PM earuMain.GetExternalObject: Exception: Constructor on type 'DigiPara.XT.Windows.EA.Server.Connection.xtwescUpdateManage' not found.
6/16/2015-5:11:08 PM earuMain.StartUpdater Error2: 'DIGIPARA.XT.WINDOWS.EA.SERVER.CONNECTION+DIGIPARA.XT.WINDOWS.EA.SERVER.CONNECTION.XTWESCUPDATEMANAGE' Instance is not found
Last change: 1/2/2016 5:05:54 PM
Dieses Fenster heißt: "Update Report"
Folgende Kommandos sind erforderlich
[ X ] Close Update Log after successful completion (default checked)
[ ] Show Update Window only within DigiPara Elevatorarchitect (default unchecked)
Ignore specific Autodesk Revit Warnings (alle default unchecked)
[ ] Instances in same place
[ ] Floors cannot be checked out
Last change: 4/22/2020 2:37:28 PM
Last change: 11/12/2022 12:10:41 PM
Last change: 4/22/2020 2:37:28 PM
Last change: 1/2/2016 5:05:54 PM
Last change: 4/22/2020 2:37:28 PM
Create rvt project , save proj1
create elevators in proj1
Save as proj2
edit EA in proj2
close proj2
open proj 1
... es werden keine elevator angezeigt
Last change: 3/28/2020 12:19:04 PM
EAR_15_00_0017
First Revit Store Update (Released April 15, 2014)
Last change: 10/12/2016 9:13:30 AM