logo

DigiPara Liftdesigner

Here you will find the latest information about DigiPara Liftdesigner.
Downloads will be available to existing clients. Please login to see the downloads.

You do not yet know the DigiPara Liftdesigner?

DigiPara Liftdesigner is a sophisticated Intelligent Elevator Configurator, which combines all the important elevator information to design elevators. The software allows the ability to quickly design and configure 2D elevator drawings and 3D elevator models.

Would you like to test the software for free?


Free Trial Version


Login
Rendered in: 00:00:02.1380336


  • Changes
  • Downloads
Expand/Collapse all

LD_24_00_0120
LD 2024 Version, published 19th of June, 2024

D-1275 (Closed)
Created by: Manuel Moos
Last change: 6/19/2024
Correct profile group for Common Components glass doors
D-1276 (Closed)
Created by: Manuel Moos
Last change: 6/19/2024
Foundation pocket / drip lip cannot be changed per entry
D-1277 (Closed)
Created by: Manuel Moos
Last change: 6/19/2024
DST: FLL / SSL dimensions in entrance sections
When you change floor finish in section. Dimension's do not move in entrance details. Floor finish should be dimensioned in each type. Foundation pocket in slab should be dimensioned as recess.

D-1278 (Closed)
Created by: Manuel Moos
Last change: 6/19/2024
Rail Bracket User Comps: Profiles with volume index set are shown on the supposedly invisible copy on the list level
D-1279 (Closed)
Created by: Manuel Moos
Last change: 6/19/2024
Correct duty tables for new entry filter in shaft wizard

LD_24_00_0105
LD 2024 Version, published 30th of April, 2024

D-1266 (Closed)
Created by: Manuel Moos
Last change: 6/19/2024
Crash on sheet frame deletion
Sometimes, deleting a sheet frame would result in a crash.
While the core reason for the crash could not be found, the paths to it were eliminated as they were bugs on their own.

D-1267 (Closed)
Created by: Manuel Moos
Last change: 6/19/2024
Add new shaft materials
It is now possible to add custom shaft materials in the Group and Shaft Configuration/Material Configuration/Preferences dialog.

D-1268 (Closed)
Created by: Manuel Moos
Last change: 6/19/2024
New LDBIM Import Tool
In the LDBIM Export Dialog, there is now a button to install our new dedicated import plugin for AutoDesk Revit.

D-1269 (Closed)
Created by: Manuel Moos
Last change: 6/19/2024
Select entry configuration in Shaft Wizard
In step 3 of the Shaft Wizard, there is now a new section "Consider Entrances", where you can pick between front entrances only, front and rear entrances, and others.

D-1270 (Closed)
Created by: Manuel Moos
Last change: 6/19/2024
Delete all Sheets
There is now a context menu item for that.

D-1271 (Closed)
Created by: Manuel Moos
Last change: 6/19/2024
Inverted Jacks
For hydraulic lifts, it is now possible to set up the jacks in inverted configuration by setting the CylinderModes.cymInverted (4) flag in LDXCylinder.CYL_MODE over the API or data tree.

D-1272 (Closed)
Created by: Manuel Moos
Last change: 6/19/2024
Revit Type Name
For LDBIM Exports, it is now possible to influence the "Type Name" display of imported families. It is controlled over the DigiPara.RevitTypeName BIM property.

LD_24_00_0080
LD 2024 Version, published 19th of January, 2024

D-0466 (Closed)
Created by: Andreas Fleischmann
Last change: 3/6/2024
LDBIM Export: Fix Integer BIM Properties with Units
Previously, they would be exported as converted to some base unit, but still marked as integer, even though the result was not an integer any more. This lead to the importer choking on reading the values.

D-0467 (Closed)
Created by: Andreas Fleischmann
Last change: 3/6/2024
Profile rotation angles displayed in property grid
Under Options, below "Profile Matrix", one can now view the angles defining the rotation. In Component Development mode, one can set the values to more easily match the rotation of another profile.
For math buffs: The angles are just the negative Euler Angles.

D-0468 (Closed)
Created by: Andreas Fleischmann
Last change: 3/11/2024
Rule compiler fixes
In several situations, the rule compilers would stumble across rules that were fine in LD 2022. In addition to the affected rules not working, there were other grave secondary effects, like severe performance degradation.

D-0469 (Closed)
Created by: Andreas Fleischmann
Last change: 3/11/2024
UserComps now always visible in product navigator
Previously, UserComps with "Picking selects Parent" active would be invisible until exchanged.

LD_24_00_0069
LD 2024 Version, published 14th of December, 2023

D-0576 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
More hall button positioning options
"Relative to shaft width": Place relative to inner edge of side wall
"Center Door to Door": Place exactly at the center between the shaft door and the shaft door of the neighbouring shaft

D-0577 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Rail bracket mode bit rbmSeperatorBeamEnabled
Was ignored on ChangePartRID if separator beam RID is set to something positive in RB_SEPB_RID

D-0578 (Closed)
Created by: Diana Trkmani
Last change: 3/11/2024
DWG Export: Fix z scale of block references
D-0579 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
JTS_GRP now configurable in duty tables
Via columns DTH_JTS_GRP_WALL_* in L_DTColDwgHorTab

D-0580 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Document BIM Property Dialog
Cancelling the dialog would apply one extra unwanted undo step

LD_24_00_0066
LD 2024 Version, published 4th of December, 2023

D-0581 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Modelspace only DWG export: Useless paperspace layout selected
..when opening the result in AutoCAD

D-0582 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
GDI Object Resource Leak
PropertyGrid generates hundreds of GDI objects for TemplateUITypeEditor

In the wrong contect, this would crash the Liftdesigner UI after about a hundred user interactions.

There was also a smaller leak in the drawing core.

D-0583 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
BIM Export Crash
Doing a LDBIM Export on a Sheet Frame with custom car, counterweight or ghost positions would crash.

D-0584 (Closed)
Created by: Diana Trkmani
Last change: 3/11/2024
Create LoadHooks on demand when explicitly queried by data tree functions

LD_24_00_0056
LD 2024 Version, published 20th of November, 2023

D-0465 (Closed)
Created by: Manuel Moos
Last change: 4/10/2024
Angle of wrap calculation wrong
For some variations of gear on top, single deflection sheaf, the angle of wrap for the rope was 180 degrees minus the true value.

D-0585 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Property Grid: After undo, sometimes wrong values are set
In some situations, mostly after some Undo operations, the property grid would send a change intended for one grid element to another.

D-0586 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Roof: Faces had wrong display names in data tree
There was no individual index and no name, they all were just '-1'.

D-0587 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Door material wrong in 3D view
It accidentally had an emissive component and was bright white.

D-0588 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Roof: Gable length wrong
Roof faces would sometimes subtract from the gable length as if they were active, when in fact they were not

D-0589 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Fix special sheet border frame
Giving a sheet a border frame from a DWG via the sheet's property grid has been fixed.

LD_24_00_0052
LD 2024 Version, published 30th of October, 2023

D-0590 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Rules with string concatenations sometimes failed to compile
In a previous version, we replaced function calls in rules with variables. We did not consider a quirk in VB.NET that affected string concatenation there. This caused rule compilation failures and performance problems, observed first on the "Develop this BIM Component" sheet.

LD_24_00_0050
LD 2024 Version, published 25th of October, 2023

D-0591 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Filters in Component Browser
In the component exchange dialog, there are now several ways to filter the components on offer. In the Table View, one can set filters at the top of columns. And at the top of the Tree View, there is a new filter icon where one can define filters that are applied to the whole tree.

D-0592 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Annotation and Dimension Background Color
It is now possible, via settings or the prototype DWG for dimensions, to define a background fill color for text fields. This can be used for highlighting or to make dimension texts on dense backgrounds more readable.

D-0593 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
CAD Format update
Liftdesigner now supports loading up to SolidWorks 2023, Revit and Inventor 2024 and Creo 10.
CAD parameter updates are possible for the most recent SolidWorks and Inventor versions.

D-0594 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
URIs Attached to Frames and Annotations
Sheet frames and sheet frame texts now have an URI property; they are exported to SVG and PDF and turn the elements into clickable links.
They are also exported to DWG as plain URI properties.

D-0595 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Slanted Roof
Shafts and machinery rooms can now have a range of roof shapes other than just flat.

LD_22_00_0300
LD 2022 Version, published 4th of December 2023

D-0596 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Modelspace only DWG export: Useless paperspace layout selected
..when opening the result in AutoCAD

D-0597 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Door material wrong in 3D view
It accidentally had an emissive component and was bright white.

D-0598 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
BIM Export Crash
Doing a LDBIM Export on a Sheet Frame with custom car, counterweight or ghost positions would crash.

D-0599 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
GDI Object Resource Leak
PropertyGrid generates hundreds of GDI objects for TemplateUITypeEditor

In the wrong contect, this would crash the Liftdesigner UI after about a hundred user interactions.

There was also a smaller leak in the drawing core.

LD_22_00_0295
LD 2022 Version, published 24th of October, 2023

D-0600 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Dimensions used Banker's Rounding when rounding to full mm
For example, 294.5 mm was rounded down to 294 mm for display in drawings, instead of up to 295 mm as in previous versions (up to Liftdesigner 2020)

LD_22_00_0294
LD 2022 Version, published 12th of October, 2023

D-0601 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Fix copying of Node Files
When copying components in the data manager between manufacturers, node files (for UserComps and CAD Files) were not copied along.

D-0602 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Fix special title and border sheet frame deletion
Deleting one manually would actually delete the other after a recalc.

D-0603 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Fix loading of Meiler DLLs
They previously required an automation license by mistake.

LD_22_00_0292
LD 2022 Version, published 4th of September, 2023

D-0604 (Closed)
Created by: Diana Trkmani
Last change: 3/11/2024
K_WD on car was not editable on walls with doors
D-0605 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Ladder step count wrong for ladders longer than about 32000 units (32 m in metr
There was a premature conversion to the signed short data type.

D-0606 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
IFC Export with non-ASCII characters in filename failed
Also affected: X3D, POV, SAT and STEP.

D-0607 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
DWG page background too small
When exporting a DWG with the default metric prototype DWG, the print settings when viewed in AutoCAD 2024 were not properly initialized.

LD_22_00_0285
LD 2022 Version, published 22nd of June, 2023

D-0608 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Files opened for reading with exclusive lock
UserComp and Sheet Frame loading code would open files with the harshest lock possible, meaning no other LiftDesigner instance could access the files at the same time. This resulted in wrong drawings and models on LDAWP servers under heavy load.

D-0609 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Use after free bug with sheet frame border and title frames
In some usage scenarios, the special sheet frames for the sheet border and title had data deleted, but then used. At the very least, this caused a small memory leak, but also crashes.

LD_22_00_0272
LD 2022 Version, published 16th of March, 2023

D-0610 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Saving a UserComp to database failure
The UserComp's name was used as is to determine the filename to save under, which did not work if the name contained slashes or other special characters.

D-0611 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Underlined Text handling changed
Previously, text annotations set to underlined would use an underlined font. Now, they use the regular font with a line drawn under the text, just as AutoCAD does, and just as the \L and \l escape sequences would use. Export of underline to PDF and DWG was broken, too. Especially bad: even without underline, we would export a made up font modifier to the DWG, which did confuse the Revit importer.

D-0612 (Open)
Created by: Diana Trkmani
Last change: 4/10/2024
Text boxes now support limited with with BIDI text
Previously, text containing right-to-left sequences would disable the automatic line break calculation.

D-0613 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
LdBIM exports with non-ASCII names failed
Due to an internal bug, LdBIM exports with non-ASCII names were not in a format that the ElevatorArchitect importer could read.

LD_22_00_0259
LD 2022 Version, published 27th of February, 2023

D-0614 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
License error in document view of compnent selection
Change a component, select "Document View", select a component with a document (indicated by the green selector; an example would be the Guide Shoe with GS_RID 2.) A licence error would pop up.

LD_22_00_0257
LD 2022 Version, published 24th of February, 2023

D-0615 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Avoid ill defined geometry and PDF output
Some checks were added that prevent input infinities to propagate to our internal geometry representation and exports.

D-0616 (Open)
Created by: Diana Trkmani
Last change: 4/10/2024
DWG annotations on (new) image frames no longer lose their colors
When image view frames were introduced, it was overlooked that a bit of code would automatically set the v4 compatibility flag. When discovered, it was left alone to avoid sudden incompatibilities, but now it has been disabled as the titular bad side effect of that flag was discovered.

D-0617 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Dimensions: All extension points outside visible box
If all extension points for a dimension endpoint lie outside of the visible box in the same direction, that is now respected and the selected point is not clamped to the visible box.

D-0618 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Impossible to select some dynamic dimensions
Most dynamic dimensions were destroyed and recreated in CalculateModel. In some reproducible cases, trying to select them caught them in the destroyed state and selection failed.

D-0619 (Closed)
Created by: Diana Trkmani
Last change: 3/11/2024
Profile modes for edge removal not respected for "ADD to Volume" Profiles
D-0620 (Closed)
Created by: Diana Trkmani
Last change: 4/10/2024
Dimension ID wraparound
Give a dimension an ID >= 32768 and some conversion to SHORT will have it interpreted as something small and have the dimension sorted in wrong in drawings.

LD_22_00_0250
LD 2022 Version, published 17th of January, 2023

D-0621 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Profile sweep paths now work with two points
Previously, at least three were required, for no good reason.

D-0622 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
IFC Export refinements
Building Storeys are now sorted by level
Project, Site and Building names are now customizable in the document's component BIM Properties
Nonstandard door type enum values are now stored in UserDefinedOperationType

D-0623 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Dimension chains jump if caption is enabled/disabled
This was a sorting bug, the description flag unintentionally entered the sorting key

D-0624 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Setting Anchor Rail CONCRETE_BEAM_DZ too early had it defaulted away later when
API Bug only

Have a freshly created anchor rail
Set the concrete beam to active
Set CONCRETE_BEAM_DZ
Call CalculateModel
Only then, the concrete beam will be activated and the activation will reset DZ to the default of 200 mm.

Workaround: Do a local CalculateModel on the anchor rail after setting the concrete beam flag.

D-0625 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Do less work if "Update automatically" is unticked
In the floor level material dialog, having the box unticked still triggered a lengthy CalculateModel call on every change.

D-0626 (Closed)
Created by: Diana Trkmani
Last change: 3/11/2024
Show view frame name in property grid

LD_22_00_0239
LD 2022 Version, published 13th of September, 2022

D-0627 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Dimensions: Option to cut at geometry bounds
Dimensions set to be visible if one or both end points lie outside of the frame's visible box are usually drawn at full length. Now a new option "Cut at geometric limits" is available for them in the property grid, shortening their display to the part that matches the geometry.

D-0628 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
DWG Block reference 3D rotation
Block references, even though they are just in 2D space, can be flipped in 3D space. This build fixes export of the most common unusual case.

LD_22_00_0219
LD 2022 Version, published 17th of June, 2022

D-0629 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Sheet Frame Overwrites window keeps position
after edits, the Overwrites docking window would jump back to the top after edits. It now remembers and restores its previous position.

D-0630 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Quick save view frame
A new context menu item allows you to quickly save the current view frame under its stored filename.

D-0631 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
RB_Y2 parameter for separator beams on rear wall
If you activate a separator beam for rail brackets on the rear wall (for the counterweight), Y2 was modified so the rail brackets would extend all the way to the back of the car. It now is left untouched.
Separator beams on the right and left wall with an L-shaped car frame had the same effect.

D-0632 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Individual separator beam positions
For rail brackets set to custom fixing options, you can now individually position the separator beam using the RB_SEPB_Y value in the local data table.

LD_22_00_0214
LD 2022 Version, published 1st of June, 2022

D-0633 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Fix geometry problems on car and counterweight ghosts
An overeager fix for an infinite loop subtly changed what gets displayed of the ghost components

D-0634 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Add tesselation detail option for CAD files
Some CAD files natively have rounded parts, we need to have them tesselated to triangles for processing. The new option "Tesselation Detail" in the property grid of CAD files controls how many triangles are used.

D-0635 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
RFA Export improvements
Builtin parameters and user defined parameters are now exported the same way, all should be editable and visible like parameters added in Revit itself.

Sad exception: The OmniClass number refuses to let itself be set via the API available to us.

D-0636 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
IFC export improvements
The PSET selection now is filtered according to the actually exported IFC class set via DigiPara.IfcExportAs

D-0637 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Accept CAD files from network shares
Previosuly, CAD files could only be added from network shares mapped to a drive letter, now the network path (\\Server\...) also is accepted and does not lead to a cryptic error

LD_22_00_0183
LD 2022 Version, published 4th of March, 2022

D-0638 (Closed)
Created by: Diana Trkmani
Last change: 3/11/2024
SolidWorks 2021 CAD update support fixed

LD_22_00_0172
LD 2022 Version, published 20th of December, 2021

D-0639 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Dimensions with extended dimension lines were clamped to the visible box
Bug was introduced in LD 21.0.11 and also fixed in 21.0.217.

D-0640 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
BANK_2_START_SX reset
In an effort to make usage easier, BANK_2_START_SX was reset to -1 if it was greater than the number of shafts. This turned out to break existing code that relied on there being no meddling with temporarily nonsensical states, for example by first setting BANK_2_START_SX in a new project, then adding shafts.

D-0641 (Closed)
Created by: Diana Trkmani
Last change: 3/11/2024
New Lamps in automatic mode were not initialized as copies of existing lamps
D-0642 (Closed)
Created by: Diana Trkmani
Last change: 3/11/2024
Counterweight position sometimes wrong in sheet frames with custom car position

LD_22_00_0163
LD 2022 Version, published 5th of November, 2021

D-0643 (Closed)
Created by: Diana Trkmani
Last change: 3/11/2024
Floor finish material sometimes not displayed correctly in 3D view
D-0644 (Closed)
Created by: Diana Trkmani
Last change: 3/11/2024
Old projects with individual 3d view scenes on view frames did not load
D-0645 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
3DXML/CATIA files could not be inserted as CAD files
Still a work in progress, we need to test more samples

LD_22_00_0160
LD 2022 Version, published 25th of October, 2021

D-0646 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Wrong V4 compatibility mode on freshly loaded dynamic sheets
The shfrm2V4Compatible-Flag in LDXSheet.Mode2 was set for all DWG frames on dynamic sheets while it should be off. This affects the position of those frames if they contain non-line drawing elements.
In the rare cases this causes wrong placements, a manual recalc after the load was a workaround.

D-0647 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Memory access error on 3D exports
In a postprocessing step for 3D exports (3DDWG, IFC,...), an array was sometimes accessed out of bounds

D-0648 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Direct PDF exports after sheet loading sometimes had the wrong page size
Under very rare, but reproducible, circumstances, the last sheet in a PDF export in the LDAWP environment would get incorrect sheet frame sizes from DWG frames and dimension the page wrong

D-0649 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Proper unicode filename support
Sheet/Frame save/load operations now support full unicode filenames. Previously, only characters in the configured system locale were supported.

D-0650 (Closed)
Created by: Diana Trkmani
Last change: 3/11/2024
UserComp position now an uneditable extended dimension in equation driven mode
D-0651 (Closed)
Created by: Diana Trkmani
Last change: 3/11/2024
Correctly store car capacity (weight & person count) in new shaft wizard

LD_22_00_0148
LD 2022 Version, published 21st of September, 2021

D-0652 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
System XML configuration multiuser rights
Rights to change system wide XML configuration files are now granted to everyone.

D-0653 (Closed)
Created by: Diana Trkmani
Last change: 3/11/2024
IFC vdi improvements
D-0654 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Avoid read/write conflicts on setting files
Access to dccSettings.xml files has been made more robust

D-0655 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Various IFC fixes
If activated, various exports of BIM Properties to PSETs threw errors.

D-0656 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Export BIM Properties unreilable
If set up in the document BIM settings before the document's objects are created

D-0657 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Fix IFC Export "Location in Building"
It was simply completely broken since early builds of Liftdesigner 2022.

LD_22_00_0133
LD 2022 Version, published 26th of July, 2021

D-0658 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Infinite loop when processing certain sections
When cutting some CAD geometry with a section plane, be it a detail section or the ghost car section, the process producing the polygons on the section plane would sometimes get stuck.

LD_22_00_0132
LD 2022 Version, published 22nd of July, 2021

D-0659 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Profile Point Activitiy Status
Is now saved when you save a profile group to the database in LiftDesigner

D-0660 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Rule Compiler Improvements
In previously disregarded corner cases, we no longer compile the dynamic rules DLL in hopeless cases, but we do recompile it when required.

D-0661 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Profile Group defined Property Grid properties
are now copied from the source if you develop a UserComp and save it to a new UserComp in LiftDesigner.

D-0662 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
IFC Property Streamlining
The BIM Properties defining IFC export properties have been simplified:
- it is no longer required to have leading and trailing dot for enum values
- instead of a plain IFC type, which was limited to PSets, you can write IFCTYPE=... in BP_DESC for all properties.
- Adapt our standard BIM Properties to make use of both above
- we no longer write descriptions (BP_DESC, BPS_DESC) into the IFC export.

LD_22_00_0121
LD 2022 Version, published 16th of June, 2021

D-0663 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Missing geometry in rendered sheet frames
Due to erroneous small object culling, some geometry would sometimes be missing from rendered central projection view frames. Traditional line mode was unaffected.

D-0664 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Refinement of post-load fix of dynamic dimensions on force symbols
Dynamic dimensions from force symbols did not work in early LD 20.0. They do work now, so to avoid sleeper dimensions popping up when loading old projects, the sleepers are removed.

However, there was a workaround that made the dimensions appear even on 20.0; the removal code now detects that workaround and leaves those dynamic dimensions alone.

LD_22_00_0116
LD 2022 Version, published 8th of June, 2021

D-0665 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Compatibility with old escalator projects restored
The raw loading of pre-2022 files worked, but component exchange was no longer possible.

LD_22_00_0114
LD 2022 Version, published 7th of June, 2021

D-0666 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Ten more user defined outline point codes
D-0667 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
AR_DIST calculation for standard length dynamic anchor rails
It was broken and the result was the same as if the anchor rail was selected to have arbitrary length.

D-0668 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
IFC Export for Revit Import fix
We were marking doors as filling shaft openings even if said shaft openings were not supposed to be in the export. That confused the Revit Importer.

LD_22_00_0109
LD 2022 Version, published 26th of May, 2021

D-0669 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Properly initialize central projection in all use cases
D-0670 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Fix matching of "Shaft*{Bank1, Solitary}" combinations without "First" or "Last"
D-0671 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
DotNetInvoking event handlers now run without restrictions

LD_22_00_0105
LD 2022 Version, published 10th of May, 2021

D-0672 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Fix BIM properties with identical BP_IDs
Default data was fixed, duplicate BP_IDs were removed
The code now handles the duplicate BP_ID case better; features that rely on BP_ID lookup will still have trouble, obviouslz.

D-0673 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Free edition serial number restored
D-0674 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Do not crash if selected graphics driver (OGL/D3D) is unavailable
Leave 3D views empty if no driver works.

D-0675 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Annotation preview for External() replacements now resizable

LD_22_00_0102
LD 2022 Version, published 3rd of May, 2021

D-0676 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Fix SVG rendered view frame aspect ratio

LD_22_00_0100
LD 2022 BETA Version, published April 27th, 2021

D-0677 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Fix memory leaks
D-0678 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Coordinate systems now get the correct size in perspective views
D-0679 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Add missing translations

LD_22_00_0090
LD 2022 BETA Version, published April 21th, 2021

D-0680 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Improve IFC export to better work on Revit import
D-0681 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
Better Duct editing
Duct Delta points now visible on selection.

D-0682 (Closed)
Created by: Diana Trkmani
Last change: 4/9/2024
STEP export: Add GUID to shapes
Fixes failing updates when importing to SolidWorks

LD_22_00_0078
LD 2022 BETA Version, published March 30th, 2021


LD_22_00_0049
LD 2022 ALPHA Version, published March 1st, 2021


LD_22_00_0047
LD 2022 ALPHA Version, published February 25th, 2021


LD_21_00_0218
LD 2021 Version, published 21th of March, 2022

D-0683 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Accept CAD files from network shares

LD_21_00_0216
LD 2021 Version, published 15th of December, 2021

D-0684 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Counterweight position sometimes wrong in sheet frames with custom car position
D-0685 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Sporadic crash when exporting 3D formats
D-0686 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Guide rail length no longer synced
D-0687 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Fix multiuser operation
D-0688 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Empty LYCHG_LYRDEST no longer causes DWG export failures

LD_21_00_0211
LD 2021 Version, published 26th of July, 2021


LD_21_00_0200
LD 2021 Version, published 16th of March, 2021


LD_21_00_0190
LD 2021 Version, published 12th of January, 2021

D-0689 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Door height: Fixed selections
D-0690 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Crash when selecting a CAD file in a developer view frame
D-0691 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Undo/Redo fixes

LD_21_00_0166
LD 2021 Version, published 16th of November, 2020

D-0692 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Installer: SQL Server installation fixed for Turkish versions of Windows

LD_21_00_0160
LD 2021 Version, published 10th of November, 2020

D-0693 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Improved editing of profile outline and sweep path

LD_21_00_0159
LD 2021 Version, published 9th of November, 2020


LD_21_00_0152
LD 2021 Version, published 13th of October, 2020

D-0694 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Liftdesigner Setup Prerequisits

LD_21_00_0142
LD 2021 Version, published 30th of September, 2020

D-0695 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Main Project Data properties not shown

LD_21_00_0140
LD 2021 Version, BETA, published 17th of September, 2020

D-0696 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Translation for Cloud- and Poolmanager
D-0697 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Performance Profiler

LD_21_00_0136
LD 2021 Version, BETA, published 2nd of September, 2020

D-0698 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Larger and more consistent fonts for UI elements
D-0699 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
New Poolmanager UI
D-0700 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Improve SaveUndo Performance for large projects
D-0701 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Sloppy Floor Levels

LD_21_00_0104
LD 2021 Version, previous BETA, published 1st of July, 2020

D-0702 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Show External$ references in DWG frames
D-0703 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Add hole symbol to cylindrical holes
D-0704 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Generic list management
D-0705 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Add preview to annotation editor
D-0706 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
LD Cloud
D-0707 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
New Component: Fish Plates
D-0708 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Sheet Frame VisibleBox Improvements
D-0709 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
UserComps now support Dynamic Anchor Rails
D-0710 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Flexible number of shaft elements
D-0711 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
CAD Automation now supports SolidWorks 2020
D-0712 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Support for UNC file paths
D-0713 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Get rid of (IDispatch **) casts
D-0714 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Dynamic Anchor Rail PGP_CODE_NO 149 and 159 went to the wrong wall
D-0715 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Dynamic anchor rail orientation was inconsistent
D-0716 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Storage dimensions not visible after load
D-0717 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Add PART_NO virtual access
D-0718 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Guide Rails: ChangePartRID induced PG_GRP change undone
D-0719 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Dynamic Dimensions should automatically use .Next
D-0720 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
SaveBIMProperty adaptions
D-0721 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Sloppy Mode: sloppify view frames on non-current sheet as well
D-0722 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
See if we can get QueryInterface between our LDX interfaces to work
D-0723 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Add CloneMe, companion of RemoveMe
D-0724 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Remove CDpObject::FindDpObjectExact
D-0725 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Full CalculateModel visible to RefModel should show the Car in default position
D-0726 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Sloppy Mode: move flags to document
D-0727 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Remove P_CADF_RID
D-0728 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Sloppy mode: check recalc on activation, should not be required
D-0729 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Sloppy Mode: Add informative timings for the individual skippables
D-0730 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Z Position of guide takes too long to update
D-0731 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Anchor Rail improvements
D-0732 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
BIM Export: Remove exception for scaffoldings
D-0733 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Rail bracket list full of custom rail bracket crashes on CalculateModel
D-0734 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Anchor rails: Whole profile group deleted on length change
D-0735 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Add function to give visible objects per treename list for view frame
D-0736 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Two DwgOwner::IsEmpty functions
D-0737 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Vertical automatic anchor rails
D-0738 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Display storage dimensions attached to view frames
D-0739 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Jumping gear orientation

LD_21_00_0016
LD 2021 Version, unreleased intermediate

D-0740 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
API Sample: Drawings do not refresh, stay empty
D-0741 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Add .Next. and .Previous. special treename segments
D-0742 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Floor level dimension extension points
D-0743 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Sheet frame texts relating to "Shaft." not selectable
D-0744 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Overwrites with "Shaft." do not match anything
D-0745 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Implement AnchorRail Profile Groups
D-0746 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Crash when adding an Inventor CAD file to LDXRailBrackets
D-0747 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
LDXAdditionalComponents.Add should not trigger rename event
D-0748 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Rename Events should be locked with global application event lock
D-0749 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
Check csHasCADFile
D-0750 (Closed)
Created by: Diana Trkmani
Last change: 3/12/2024
UserComp profiles: profile parameters not shown
D-0751 (Open)
Created by: Diana Trkmani
Last change: 3/12/2024
Confusing default for EntryModes.emIndividualDimensions

LD_21_00_0008
LD 2021 Version, BETA

D-0752 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDCloud: Sort ldcloud libraries from cloud group, contract and library name
D-0753 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDCloud: Enable / Disable Modules by Contract
D-0754 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDCloud: Send list of installed libraries - Non existing metafile instructions
D-0755 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDCloud: Show uninstall library reason
D-0756 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDCloud: Add necessary stuff to dotfuscator xml
D-0757 (Open)
Created by: Diana Trkmani
Last change: 3/13/2024
Licensing: Create log for salesforce api calls for further evaluation
D-0758 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDCloud: No action if module extis in export directory
D-0759 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Adjust version number for LiftdesignerCloud.exe
D-0760 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDCloud: Remeber which items were expanded or not (save to xml)
D-0761 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
VS 2019 Build Tests for LD V21_0
D-0762 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
VS 2019 Build Adapt batch files (RidScan...) for VS 2019 calls
D-0763 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Create Build Process for 21_0 Branch with VS2019 / WinServer2019
D-0764 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Adapt .net programs for build processes
D-0765 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDCloud: Create LDCloud Management WPF Application
D-0766 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDCloud: Create view for managing ldlcoud libraries
D-0767 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDCloud: Connect to ldcloud wcf webservice
D-0768 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDCloud: Delete ld libraries
D-0769 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDCloud: Update "existing" ld libraries
D-0770 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDCloud: Import "new" ld libraries
D-0771 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Optimize property(standard) lookup
D-0772 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Rename 2021 solutions
D-0773 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
CSG: Better order of execution of cut planes
D-0774 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Support [2]*5 format in profile parameter fomulae
D-0775 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Query Techsoft about unique IDs in Revit imports
D-0776 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Eliminate RID scan and check in LDBase
D-0777 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Profile TK project
D-0778 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Update HOOPS Exchange to 2019 SP2
D-0779 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Deleting overwrites from the UI does not work
D-0780 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Add ViewFrameContentChanged event
D-0781 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Sheet switch performance: Not not immediately elide body lists
D-0782 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Performance: Avoid frame rebuilds on selection change
D-0783 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Add CalculateModelBarrierAcquires before exports
D-0784 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Initial LDXComp state: RID 0 and active
D-0785 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Remove 32 bit compilation
D-0787 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
ldBIM Export: Refuge Spaces exported from PrintMode BIM frames solid
D-0788 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
BUG: Hatch in section view
D-0789 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
CGrFEMForce does not implement Get_LDF_WHAT_Bit
D-0790 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Export CalculateModelRelease/Acquire to COM
D-0791 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Deleting a sheet frame caused crash
D-0792 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
3D View: Do not update if hidden
D-0793 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Optimize translation fetching
D-0794 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
GBox::PossibleCross as called from GBody::HideLines inefficient
D-0795 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
MAIN: Update LDOOP GUIDs
D-0796 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Move DWG frame -> too much work
D-0797 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Sloppy Mode
D-0798 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
SaveUndo slow for large projects, provide a single shaft variant
D-0799 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Dimension display should not switch to edit mode on select in print mode
D-0800 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Shaft door does not respect DT_DRAW_TYPE_DO_NOT_DRAW_SILL flag in DT_DRAW_TYPE
D-0801 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Sloppy mode: temporarily disable during exports
D-0802 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Remove obsolete XML serialization of occurrences
D-0803 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
CalculateModel split

LD_20_00_0295
LD 2020 Version, 23rd of March 2020

D-0804 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Fallout from fix for TR-06553: unwanted digits in metric dimension

LD_20_00_0294
LD 2020 Version, 18th of March 2020

D-0805 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Do not merge geometry from different representation items in CAD files
D-0806 (Open)
Created by: Diana Trkmani
Last change: 3/13/2024
In DWG annotation, MText box width and text height are scaled inconsistently

LD_20_00_0290
LD 2020 Version, 5nd of March 2020

D-0807 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Sporadic crashes in CGrComp::DoCalculateModel if parent is not a comp as well
D-0808 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Make Feet/Inch/FractionalInch display consistent with AutoCAD

LD_20_00_0286
LD 2020 Version, 2nd of March 2020

D-0809 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Make ObjectARX extension available for AutoCAD 2020
D-0810 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Add CFD_USER_PG profile group parameters to car frame
D-0811 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Overwrite Copy/Paste issues
D-0812 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Exception and (node file/projecct) load abort
D-0813 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Write native test for TR-06559

LD_20_00_0276
LD 2020 Version, 17th of January 2020

D-0814 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
UserComps with ucmIsPartOfParentProfileGroup bit set should not take shfpUnknown
D-0815 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Merged machine rooms autocalc should also preserve component positions
D-0816 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
XML export of BIM properties was flattened
D-0817 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Two sheets may be assigned work areas
D-0818 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
SolidWorks: Updates for version 2019
D-0819 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
AutoCAD Mechanical export can be opened, but not saved in Mechanical 2017
D-0820 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Nonsense rounding
D-0821 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Stalling IFC4 export
D-0822 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
No BIM properties editable on UBolt

LD_20_00_0266
LD 2020 Version, 26th of November 2019

D-0823 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Improve error handling of file exports
D-0824 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Define IfcBuilding properties so standard IFC4 exports yield no warnings
D-0825 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
User comp rotation and position UI
D-0826 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Railbrackets.ChangePartRID does not activate individual rail brackets reliably
D-0827 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Add LDXShaft.LogicCenterPoint
D-0828 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Dynamic Dimensions between Force Points: Make possible
D-0829 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
CAD file triangle stips not displayed correctly
D-0830 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Add SheetFrame.CAR_MODE (CW_MODE?) to data tree
D-0831 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
CylinderDimTab.CY_PG_GRP ignored
D-0832 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Floor to floor default dimension only attached to SHAFT0
D-0833 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
If enabled, display of round feet values should be 1'-0", not 1'-0
D-0834 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
(Dynamic) Dimension on machine room 0 not visible
D-0835 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDXObject.RemoveMe API sample crashes

LD_20_00_0255
LD 2020 Version, 25th of October 2019

D-0836 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Verify that you can't force evaluation of a non-eval BIM property value
D-0837 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Nested User Comps not visible in developer frame
D-0838 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
SingleRuleEditor can be not scrolled
D-0839 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Investigate effect of CGrCylinderDistEintrag m_CY_TOP_RUNBY_ADD_Edit
D-0840 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Have tests check error log status, default to fail on errors or warnings
D-0841 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
CarCelilingPanel (and others?): Dynamic dimensions not visible
D-0842 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
New project: BIM Property evaluation failures
D-0843 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Product activation Improvements for Citrix Desktop
D-0844 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
BIM Properties: Check Instance/Type parameter state
D-0845 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDXBIMPropertyValue.RuleEvaluationSucceeded not displayed in UI
D-0846 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Project BIM settings for fresh projects over old shaft wizard
D-0847 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Project BIM settings: wrong update/saveundo order
D-0848 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Consider merging Changeset 41955 from 21_0
D-0849 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Roll back "Component Switch" behaviour
D-0850 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Add BK Factory Library to Free Edtion
D-0851 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Deleting a view frame after undo fails
D-0852 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
FLL Dialog must support decimal floor distances
D-0853 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
IFC Import: check odd roof displacement
D-0854 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
BIM Export: Proper export of >=128 characters in XML
D-0855 (Open)
Created by: Diana Trkmani
Last change: 3/13/2024
BIM Property Values without BIM Property

LD_20_00_0246
LD 2020 Version, 8th of October 2019

D-0856 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Rail bracket count

LD_20_00_0244
LD 2020 Version, 30th of September 2019

D-0857 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Write tests for TR-06260, TR-06258 and TR-06257
D-0858 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
LDXCarDoor.CL_DIST not settable via COM property or simple SetValue on car door
D-0859 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Individual rail bracket user comps not updated on pure ChangePartRID
D-0860 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
MetricCoordinateSystem / LDBIM / Revit 2020 setting
D-0861 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Wrong door fixing point world positions after change notification to shaft door
D-0862 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Edit Shaft0.Entries1.E0.Opening.T_AUSBR_H
D-0863 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
L_CWDimTab.CW_GS_RID_BOTTOM: How to turn off guide shoes?
D-0864 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
CGrLdvFrame::GetVisibleObjects ignores lines

LD_20_00_0238
LD 2020 Version, 6th of September 2019

D-0865 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Machine room less elevator: Shaft.MachineRoom.VentilationWindow.Hole0 invisble
D-0866 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Door machine visibility exception
D-0867 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Visibility checks on CGrFEMForce broken

LD_20_00_0234
LD 2020 Version, 4th of September 2019

D-0868 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
BIM: Add Revit Families/Templates for Revit 2020
D-0869 (Open)
Created by: Diana Trkmani
Last change: 3/13/2024
LDBIM-LOD300 US sheet has stray frame
D-0870 (Open)
Created by: Diana Trkmani
Last change: 3/13/2024
Revit families had LDXType mapped to the wrong shared parameter

LD_20_00_0227
LD 2020 Version, 28th of August 2019

D-0871 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Long dimensions with certain overwrites get placed wrong
D-0872 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Two frames with the same custom modes, but different ghost sizes
D-0873 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
Compensating Rope in chain line mode shown even if inactive or disabled
D-0874 (Closed)
Created by: Diana Trkmani
Last change: 3/13/2024
BIM Export: Make AvailableClasses/VisibleClasses unbounded in path depth
D-0875 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
BIM Export: Disabling BIM properties for all but the document effect on hole
D-0876 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
BIM Export: all default LDXBuffer objects lumped into one CAD file
D-0877 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
BIM: Implement additional BP_TYPE Values
D-0878 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
LDBIM: Imperial LD project units
D-0879 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
LDBIM in Imperials RVT
D-0880 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Crash with updates and deleted BIM property standards
D-0881 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Add a mass density type BIM property, test and implement IFC handling

LD_20_00_0218
LD 2020 Version, 16th of July 2019

D-0882 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Project specific BIM settings: Default value with quotation marks

LD_20_00_0215
LD 2020 Version, 10th of July 2019

D-0883 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Shaft0.Hole0 appears twice in BIM export XML list
D-0884 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
BIM-Export from arbitrary frame with LDBIM-LOD sheet present
D-0885 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Rule evaluation by exception log message needs improvements
D-0886 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Exceptions not caught in DigiPara.LD.CustomInterfaces.IEvaluateRules.ProcessXML
D-0887 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Log rule errors only once per rule
D-0888 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Bad values for rules with errors in non-string BIM properties
D-0889 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Specify error behavior of LDXBimPropertyValue::SetValue

LD_20_00_0211
LD 2020 Prerelease Version, 1st of July 2019

D-0890 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Entry floor finish missing in 3d view if floor level is shorter than fl width
D-0891 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
LDBIM Export: Properties with failed rule evaluation still need to export units
D-0892 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
BIMobject SEEK/const_15_velocity (and others?) without proper units
D-0893 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
BIM property values not updated to new rules on BIM/IFC export
D-0894 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Shaft0.CW.Weight.Gov.Hole0. vanishes from 3d view if set to dashed
D-0895 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Make holes in IFC export not 100% transparent, maybe configurable
D-0896 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
BIM/IFC export from LDBIM-LOD sheets should always be WYSIWYG
D-0897 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Hole transparency for export should not be disabled for dashed/dotted holes
D-0898 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
STEP export should have full shaft geometry
D-0899 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Remove conflicting variables from InvisibleMetricShaft.rft
D-0900 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Back of door opening closed up in OneBodyPerFinegrainedOwner
D-0901 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Anchor rails not reported as clones
D-0902 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Rail Bracket Anchor Rails: Instance Parameter BIM properties not persisted
D-0903 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
BIM properties disabled by rule still apear in LdBIM export
D-0904 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Make BIMExportModes.bemIndividualPropertyValues obsolete
D-0905 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
MRLess: do not show machine room hole, is redundant
D-0906 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Schindler crash dumps: Do unhandled exceptions in event handlers cause them?
D-0907 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
LDBIM Export: Add all parameters at type/family level, even instance ones
D-0908 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Handle units

LD_20_00_0208
LD 2020 Prerelease Version, 18th of June 2019

D-0909 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Overwrite for "Shaft*.Hole*2." matches Shaft0.Hole0 with new pattern matching
D-0910 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
With sample file from TR-06102, CGrCarHandRails::Resize gets called too often
D-0911 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Mapping between LDXID and LDXNAME: handle missing database entries
D-0912 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
LD Sheet frame section hatch broken
D-0913 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Enable Revit BIM property standard by default
D-0914 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Enable export for typical important LDX components by default
D-0915 (Open)
Created by: Diana Trkmani
Last change: 3/14/2024
BIM Property sample assertion failure

LD_20_00_0205
LD 2020 Prerelease Version, 29th of May 2019

D-0916 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
4 Floors Revit Project: Occurence of Window is missing
D-0917 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
4 Floors Revit Project: Annotation not visible
D-0918 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Landing door fixing point anchor rail not displayed
D-0919 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Crash when selecting anything in 3d view
D-0920 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Different results after loading xml again
D-0921 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
BFileIo::ReadTime always determined null times

LD_20_00_0199
LD 2020 Prerelease version, 24th of May 2019

D-0922 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Annotations for invisible AnchorRails not snown on V4 compatible frame
D-0923 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Default by Sheet - Extension-Line
D-0924 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
CAR 2D-Line not visible in a view frame
D-0925 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Annotation for Door Axis
D-0926 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
BIM Properties: Add accessors for DigiPara BPS
D-0927 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Assertion failure when adding a CAD file from disk

LD_20_00_0196
LD 2020 Prerelease version, 17th of May 2019

D-0928 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Assertion failure on loading old frames with overwrites for both of W_O and W_U
D-0929 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
IDispatch implementation on LDXUserCompVec broken

LD_20_00_0195
LD 2020 Prerelease version, 14th of May 2019

D-0930 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Uninitialized COM pointers in LDX4
D-0931 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
DelayedActivator did not check form's IsDisposed in all paths
D-0932 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Shaft invisible in machine room view if machine room is side/bottom

LD_20_00_0193
LD 2020 Prerelease version, 13th of May 2019


LD_20_00_0191
LD 2020 Prerelease version, 6th of May 2019

D-0933 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
ignore "DigiPara Liftdesigner CAD Automation Edition 04753.ldm12" at autoimport
D-0934 (Closed)
Created by: Diana Trkmani
Last change: 3/14/2024
Iteration over LDXCarFloorPanels broken

LD_20_00_0180
LD 2020 Prerelease version, 26th of April 2019

D-0935 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
red breadcrumb items
D-0936 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Änderungen bei "Export BIM File"
D-0937 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
DocumentCreateFileType.cfDwg2018
D-0938 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Consider flattening the BIM property value data tree
D-0939 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Performance problem in GBodyList::Sub1
D-0940 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Clear out class BIM settings where export is explicitly disabled
D-0941 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
LDXDocument does not appear in BIM Properties Component List
D-0942 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Fill BIM property values when they are expanded in the data tree
D-0943 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Only classes with LDX_TYPE_ASSIGNABLE should be able to hold BIM properties
D-0944 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
IFC correctness test, try different loaders
D-0945 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Occurrence: Characteristic Points
D-0946 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Comp.UserChildren.Item("NAME") is supposed to work
D-0947 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Floor levels created with metric values on new imperial project
D-0948 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Update from database: identify properties by BP_ID
D-0949 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM/IFC export: update BIM properties from database before export
D-0950 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Exclude non-persistent BIM property values from XML export
D-0951 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Exclude non-export BIM property values from data tree
D-0952 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Mitigate TR-06038 on load
D-0953 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Turn property values non-eval if the user edits the VALUE over the data tree

LD_20_00_0176
LD 2020 Prerelease version, 23th of April 2019

D-0954 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
"Component BIM Properties" am "Document"
D-0955 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
"Component BIM Properties" changes
D-0956 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
3D DWG Export improvements for Elevator Cloud
D-0957 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Accept LDXShaft_LDXCar in Include/ExcludeClasses
D-0958 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Add "Generated" to FULL BIM family name
D-0959 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Add a check for https calls for licensing and other service calls
D-0960 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Add BIMPropertyRuleMode rule valid flag
D-0961 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Add button to project bim properties for ILDXBIMProperties.UpdateFromDatabase
D-0962 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Add Expanded list of LDX_GROUPS to DocumentBIMProperties
D-0963 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Add LDX API samples and tests
D-0964 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Add LDXObject.GetLDXType(ObjectId), returning the requested interface
D-0965 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Add LDXSheetFrame.ClassFilters to data tree
D-0966 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Add LDXSheetFrame.CreateFile
D-0967 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Add navigation to document BIM properties do object properties
D-0968 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Add New Tables
D-0969 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Add SetAllBP_MODES and SetAllBPSModes
D-0970 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Add shared instance parameters to CAD parameter list so they can be created
D-0971 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Algebraic expressions for GPoint such as P+Q, P*lambda
D-0972 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Allow BOOL-> IfcLogical conversion
D-0973 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
AnchorRails: Mind BIM Properties in Uebertrage...
D-0974 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Andreas Mails vom 6.3.
D-0975 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Annotations visible for components on the invisible wall in vertical sections
D-0976 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Aufrufe von DigiPara.Shared.NativeDLL.LDB.BLogTabInc() und BLogTabDec()
D-0977 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
bemExportAsSingleObjectEnabled should be implicit if bemExportPropertiesEnabled
D-0978 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Better mode edit possibilities in datamanager
D-0979 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM ESC: Disable CSG for loading hook? holes
D-0980 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export Dialog
D-0981 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export from non-3D view: Do not show entrance block and ff
D-0982 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export view: Selecting a hole shows hole symbol
D-0983 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export, classic import: individual holes missing
D-0984 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export: Accept new class filters
D-0985 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export: Add blocks
D-0986 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export: Do not export zero size holes
D-0987 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export: Don't hardcode exclude holes
D-0988 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export: Export BFT_RID template
D-0989 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export: Export length parameters as feet.
D-0990 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export: Export main shaft hole als LDXShaft with width/height/depth
D-0991 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export: Export possible ldx filter list
D-0992 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export: Hole native CAD file check geometry create flags
D-0993 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export: support advanced ldxtype filter list (with parents)
D-0994 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Export: VisibleClasses3 does not contain all required - elements
D-0995 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Exports Ribbon
D-0996 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM LOD Sheet: Selection jumps when activating individual BIM export
D-0997 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM optimization: Have components that are rotated only around Z as clones
D-0998 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Properties - License Check
D-0999 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Properties in 652 anmelden
D-1000 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM property data corrections
D-1001 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Property Values
D-1002 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Rules: Evaluate with type specific callback
D-1003 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Standards on Object considered the wrong standards on Document their parent
D-1004 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIMProperties should really vanish if disabled
D-1005 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BP_TYPE
D-1006 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BP_U_MODE
D-1007 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BPR_LDXTYPES shoud be case insensitive and accept different separators
D-1008 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BPR_LDXTYPES should accept the class filter format
D-1009 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BPR_MODE: Property nicht erzeugen
D-1010 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BRP_TREENAME_FILTER to accept partial matches (so Shaft0. matches Shaft0.Car)
D-1011 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BUG: Additional Child: New Add Child does not show up
D-1012 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Build Process does not create correct build number in 2020
D-1013 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
CAD Update skipped files due to unchanged parameters should be logged
D-1014 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
CAD Update: If we know we just opened a file, never refuse to run the update
D-1015 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
CAD Update: One CAD file on "On value change" always gets updated
D-1016 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Car Area Annotation Broken
D-1017 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Car Drive Developer Ansicht
D-1018 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
CDpRuleString should handle simple cases itself
D-1019 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
CGrCompVec::DeleteIf should, like the equivalent on GrListView, pass references.
D-1020 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Change L_BimPropertyStandardTab
D-1021 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Change: CAD file occurrences that are profile point sources visible
D-1022 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
BIM Project Settings
D-1023 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Change: Door Machine visibility no longer tied to door visibility
D-1024 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Changes / New properties for Wall Segment
D-1025 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Changes to Project BIM Settings Dialog
D-1026 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Check BP_MODE_STATUS in standard-disabled-case
D-1027 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Check MFC DLL setup: do we need to do anything?
D-1028 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Check out IFC libraries
D-1029 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
ClassBIMProperties: Querying ObjectBimProperties interface fails
D-1030 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Clean up redundant class BIM properties
D-1031 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
COM improvements
D-1032 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
const_cast in CGrStorageTextEintrag::GetVal
D-1033 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Create a new Build Staging for V2020
D-1034 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Create data tables
D-1035 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Create new Branch for V2020
D-1036 (Closed)
Created by: Diana Trkmani
Last change: 3/15/2024
Create new Build Server for V2020
D-1037 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Create new L_BIMFamilyTemplate-Tables
D-1038 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
CREO When failing to connect to a clearly running creo instance,
D-1039 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Data Manager: L_BimPropertyRuleTab.BPR_RULE muss als StringRule behandelt werden
D-1040 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Default-interpret BPS_MODE as export disabled
D-1041 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Delete BPS when export mode goes to 0
D-1042 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Delete hole from BIM view -> Pocket springs up
D-1043 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Delete RFA directory from TFS
D-1044 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Dimension Chain Texts: enable left/right positioning for top/bottom chains
D-1045 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Disable BIM properties on Sheets/sheet frames
D-1046 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Disabled document standards should not be synced to objects
D-1047 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Disabling BIM Standard must delete items from objects
D-1048 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Disregard modes on DigiPara.RevitTargetName for BIM export
D-1049 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Disregard modes on DigiPara.RevitTargetName for BIM export
D-1050 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Document properties: show Value in data tree (if no-eval)
D-1051 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Empty rules are not an error, evaluate as empty string.
D-1052 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Enable BIM properties for LDXHole by default
D-1053 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Enabling BIM Properties for Landing Door must enable properties for all doors
D-1054 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Entry/Hallbutton: Change from indiv to group
D-1055 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Error on Exit RevitViewer
D-1056 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Esc BIM/IFC: exclude floor level geometry by default
D-1057 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
evaluate DigiPara Properties to be combined with Hilti
D-1058 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Export BIM Files
D-1059 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Export to IFC
D-1060 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Export to LDBIM xml
D-1061 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Floor finish in IFC/3DDWG export not transparent, but in 3d view
D-1062 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Frame mode "Show like IFC Export": Mind shaft geometry
D-1063 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Generated Model: Never export Shaft.Hole0. to bim model
D-1064 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Get rid of CLD30Doc::m_DimTextMode
D-1065 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Get rid of min/max macros
D-1066 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
GetEquationReplaceVariables and SetProfilGruppenParameter should be const
D-1067 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
GetVisibleClasses: Include - for classes that could be visible, but are not
D-1068 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Give BIM Export the option to combine groups into single 3DDWG/Family
D-1069 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
GPoly and GBody::Bisect should transform unique_ptrs to unique_ptrs
D-1070 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
HOOPS: Make sure no demo programs get deployed
D-1071 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC / LDBIM: Show escalator holes without shaft floors
D-1072 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC Adapt to new BIM Property layout
D-1073 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC Add IfcPropertyBoundedValue
D-1074 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC Config todo
D-1075 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC Config: Configure "Holes" as ifcVoid
D-1076 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC Do not enforce PSET export
D-1077 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC Durchbrueche
D-1078 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC ESC: Make cutouts look good
D-1079 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC Escalator: Holes without a shaft
D-1080 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC Export: Also accept PSET properties into native IFC class properties
D-1081 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC Export: Car missing if shaft is enabled
D-1082 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC Export: Disabled PSETs really should not be exported
D-1083 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC Export: Do not attach geometry to IfcBuildingStorey
D-1084 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC make relations configurable
D-1085 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC Respect P_ENUMERATEDVALUE
D-1086 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC Use GUIDs from project as much as possible
D-1087 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC/BIM/3DDWG: Unify result
D-1088 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC: "Name" property, when is it the full tree name?
D-1089 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC: Add at least some IFC2X3 support
D-1090 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC: Add Lift Hierarchy
D-1091 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC: Default project/site/building names
D-1092 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC: Fill IfcRepresentation.RepresentationType
D-1093 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC: Geometry not well defined
D-1094 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC: Odd geometry attached to floor level, at z=0
D-1095 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IFC: Respect IFCPositiveLengthMeasure from BP_DESC
D-1096 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Implement and use IDisposable EvenLocker
D-1097 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Implement C++ storage and COM interfaces
D-1098 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Implement specialized serialization for CADFOccurrences
D-1099 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Import from 3DDWG (or a side chanel) into BIM Cloud created family
D-1100 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
TR-05266
D-1101 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Inconsistencies between LDX names from database and CDpObject::LdxName
D-1102 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Inject BDS style export information into BIM export
D-1103 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Invalid BIM Property Configuration breaks IFC export
D-1104 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
IS-Version Update
D-1105 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
L_BIMPropertyTab BP_ID New GUID
D-1106 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
LDBIM Export: Make the document the top level element
D-1107 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
LDBIM/IFC: Option to disable BIM property export
D-1108 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
LDXHideCS should really have ReTransform, (Re)Rotate and for Vectors, too
D-1109 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
LDXObject.ObjectName2 verwenden
D-1110 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
License inclusions
D-1111 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Liftdatamanager translations "Messages / Texts"
D-1112 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
List of visible classes should be put into LDBIM XML
D-1113 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Machine room hole should be selectable and fully transparent in 3d view
D-1114 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
MachineRoom.FloorLevel: can pick one level below the lowest floor with access
D-1115 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Make BIM export results visible in BIM LOD sheet
D-1116 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Make BIM property export mode also available per class
D-1117 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Make clone behavior of BP value configurable
D-1118 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Make GetObjectPrefix const
D-1119 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Make ObjectId usage 64 bit
D-1120 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Make sure one can ENABLE the room outer box via class filters
D-1121 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Make sure the visible classes - section contains -LDXShaft
D-1122 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Mind cylindrical holes and holes that are rotated weirdly
D-1123 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
More mode flag edit issues
D-1124 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Move sfodmCaptionMask to SheetFrameOverwriteDimChainModes
D-1125 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
NativeCADFile.CADParameters müssen als Instanzparameter gesetzt werden
D-1126 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
New Docking Window "Component BIM Properties"
D-1127 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
New Table L_LDXGroupTab, and Changes in L_LDXTab
D-1128 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
No feedback on CAD program connection failure in mapping edit dialog
D-1129 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
No option to show both machine room and shaft in plan view
D-1130 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
ObjectBIMProperties: Always should exist if LDX interface asks for them
D-1131 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Old BIM Properties do not go away
D-1132 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Optimize GMatrix3 operator *=, postMultiplyWith, PreMultiplyWith
D-1133 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Optimize individual change notifications
D-1134 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Optimize Serialization
D-1135 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Option to switch to OpenGL renderer
D-1136 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Outline Sweeps: Mark inner polygons as invisible
D-1137 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
PG_DESC column is missing in database
D-1138 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Please create Revit_Hole_Metric.rfa
D-1139 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Project BIM Settings and Components BIM Properties UI
D-1140 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Property Grid: Send better change notifications
D-1141 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Put new IFC export behind MF_RID check
D-1142 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
RailBracketsModes.rbmExtendedDimensionsGoToFloorLevels Flag in PropertiesGrid
D-1143 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Remove export exception: LDXHole back to off
D-1144 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Remove some Manufacturer_ data tree entries
D-1145 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Rename Datatree Items
D-1146 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Respect BPS exportDisabled flag on first load from database
D-1147 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Rule evaluation missing
D-1148 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
SaveProfileGroup does not save Profile name from development
D-1149 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Schindler WL - Pitbase Units USER_PGs erweitern
D-1150 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Selection lost when objects get destroyed and recreated
D-1151 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Shared Parameter Datei erstellen
D-1152 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Shared Parameters in DM mappen
D-1153 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Sheet templates (i.E. on new project) tend to have invisible shafts set
D-1154 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Specify data tables
D-1155 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Spurious rename events on user comps and rail brackets on load
D-1156 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Target Revit Version: Kann veraltete Version nicht im Dialog updaten
D-1157 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Test Escalator BIM Export for correct type names
D-1158 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Test for Revit Viewer Mode
D-1159 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Test/Repair BIM export for old EA versions
D-1160 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Test: First edit, no "Generated Model" detail available
D-1161 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Two annotations to the same LDXComp conflict
D-1162 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Unify 3d exports
D-1163 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Update APIDOC to BIMPropertyValue
D-1164 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Update HOOPS Exchange to 2019
D-1165 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Upgrade to Teigha 4.3.X to support DWG 2018 format
D-1166 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
User comps invisible in preview when adding them to a LDXGuide
D-1167 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
UserComp identity lost on memcopy
D-1168 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
UserComp Properties
D-1169 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Verify: Rules without evaluation should not be synced on MemCopy
D-1170 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Different cleanups
D-1171 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Adapt ESC compile path
D-1172 (Closed)
Created by: Diana Trkmani
Last change: 3/18/2024
Floor level markers appear/disappear when switching between sheets

LD_18_00_0239
LD 2018 Version, released 8th of October, 2019


LD_18_00_0232
LD 2018 Version, released 18th of June, 2019


LD_18_00_0229
LD 2018 Version, released 24th of May, 2019


LD_18_00_0219
LD 2018 Version, released 18th of March, 2019


LD_18_00_0218
LD 2018 Version, released 15th of March, 2019


LD_18_00_0215
LD 2018 Version, released 29th of January, 2019


LD_18_00_0213
LD 2018 Version, released 21st of January, 2019


LD_18_00_0212
LD 2018 Version, released 21st of January, 2019


LD_18_00_0210
LD 2018 Version, released 8th of January, 2019


LD_18_00_0203
LD 2018 Version, released 12th of December, 2018


LD_18_00_0201
LD 2018 Version, released 6th of December, 2018


LD_18_00_0197
LD 2018 Version, released 21st of November, 2018


LD_18_00_0195
LD 2018 Version, released 24th of October, 2018


LD_18_00_0193
LD 2018 Version, released 11th of October, 2018


LD_18_00_0185
LD 2018 Version, released 25th of September, 2018


LD_18_00_0182
LD 2018 Version, released 10th of September, 2018


LD_18_00_0178
LD 2018 Version, released 31th of August, 2018


LD_18_00_0177
LD 2018 Version, released 30th of August, 2018


LD_18_00_0176
LD 2018 Version, released 17th of August, 2018


LD_18_00_0171
LD 2018 Version, released 17th of July, 2018


LD_18_00_0168
LD 2018 Version, released 12th of July, 2018


LD_18_00_0163
LD 2018 Version, released 4th of July, 2018


LD_18_00_0144
LD 2018 Version, released 6th of June, 2018


LD_18_00_0142
LD 2018 Version, released 5th of June, 2018


LD_18_00_0140
LD 2018 Version, released 4th of June, 2018


LD_18_00_0138
LD 2018 Version, released 4th of June, 2018


LD_18_00_0134
LD 2018 Version, released 30th of May, 2018


LD_18_00_0132
LD 2018 Version, released 25th May, 2018


LD_18_00_0129
LD 2018 Version, released 16th May, 2018


LD_18_00_0126
LD 2018 Version, released 5th May, 2018


LD_18_00_0123
LD 2018 Version, released 2nd May, 2018


LD_18_00_0122
LD 2018 Version, released 27rd of April, 2018


LD_18_00_0115
LD 2018 Version, released 23rd of April, 2018


LD_17_00_0311
LD 2017 Version, released 30th of August, 2018


LD_17_00_0308
LD 2017 Version, released 17th of August, 2018


LD_17_00_0307
LD 2017 Version, released 17th of July, 2018


LD_17_00_0305
LD 2017 Version, released 10th of July, 2018


LD_17_00_0302
LD 2017 Version, released 8th of June, 2018


LD_17_00_0301
LD 2017 Version, released 28th of May, 2018


LD_17_00_0294
LD 2017 Version, released 5th of April, 2018


LD_17_00_0289
LD 2017 Version, released 20th of February, 2018


LD_17_00_0288
LD 2017 Version, released 8th of February, 2018


LD_17_00_0279
LD 2017 Version, released 12th of December 2017


LD_17_00_0276
LD 2017 Version, released 1st of December 2017


LD_17_00_0273
LD 2017 Version, released 24th of November 2017


LD_17_00_0247
LD 2017 Version, released 26th of September 2017


LD_17_00_0242
LD 2017 Version, released 30th of August 2017


LD_17_00_0209
LD 2017 Version, released 13th of June 2017


LD_17_00_0199
LD 2017 Version, released 28th of April 2017


LD_17_00_0196
LD 2017 Version, released 15th of March 2017


LD_17_00_0180
LD 2017 Version, released 31th of January 2017


LD_17_00_0163
LD 2017 Version, released 5th of January 2017


LD_17_00_0156
LD 2017 released on 5.December 2016


LD_17_00_0154
LD 2017 Version, released November 17th, 2016


LD_17_00_0152
LD 2017 Version, released November 9th, 2016


LD_17_00_0147
LD 2017 released on 1.November 2016


LD_17_00_0146
LD 2017 Free Edtion, 26.10.2016


LD_17_00_0138
LD 2017 Free Edtion, 14.10.2016


LD_17_00_0063
BETA Version 2017 update of 21. June 2016


LD_16_00_0268
Version 2016 update of 28th of September 2018


LD_16_00_0263
Version 2016 update of 29h of November 2017


LD_16_00_0259
Version 2016 update of 26th of July 2017


LD_16_00_0258
Version 2016 update of 28th of April 2017


LD_16_00_0253
Version 2016 update of 23. March 2017


LD_16_00_0242
Version 2016 update of 17. November 2016


LD_16_00_0241
Version 2016 update of 20. September 2016


LD_16_00_0237
Version 2016 update of 4. August 2016


LD_16_00_0236
Version 2016 update of 29. July 2016


LD_16_00_0229
Version 2016 update of 22. June 2016


LD_16_00_0228
Version 2016 update of 20. June 2016


LD_16_00_0223
Version 2016 update of 20. May 2016


LD_16_00_0200
Version 2016 update of 20. April 2016


LD_16_00_0187
Version 2016 update of 7. March. 2016


LD_16_00_0183
Version 2016 update of 25. Feb. 2016


LD_16_00_0151
Version 2016 update of 13.Oct 2015


LD_16_00_0145
2016 fix of 17.9.2015


LD_16_00_0144
2016 fix of 15.9.2015


LD_16_00_0134
2016 Update Release of 27.7.2015


LD_16_00_0122
2016 FCS release, 18.6.2015

D-0333 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
BIM Model not complete
The issue has been resolved.

D-0334 (Closed)
Created by: Nikolaj Merzlikin
Last change: 11/17/2020
Improve Properties & Data tree dialog boxes
D-0399 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Room W_O and W_U were swapped
The tree names are correct now and consistent with the rest.
User code accessing these properties via the data tree or Get/SetValue needs to be adapted.

D-0450 (Open)
Created by: Kai Nitz
Last change: 11/17/2020
Datatree referenzen in Messages / Translations benutzen
attachments
ExternalReferencesInMessageTranslations
D-0452 (Open)
Created by: Kai Nitz
Last change: 11/17/2020
Update modisfied dwgs in drawing
D-0457 (Open)
Created by: Nishantha Weerasinghe
Last change: 11/17/2020
Car kick plates' width cannot be modified
attachments
Car kick plates' width cannot be modified

LD_15_01_9999
next 2015.1 release...

D-0403 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
DWG Export: Layout not taken from prototype DWG
The page layouts are now copied from the default layout "Layout1" in the prototype DWG.

LD_15_00_0211
Bugfixes

D-0447 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Unit mode "cm m" gives garbled output if cm value needs a decimal point
The issue only affected plain Text-fields in external DWG blocks, they do not support the formatting control strings we inserted. For those fields only, formatting has been disabled.
download dwgTextBlockBuffers.dwg
download ld301.ld3

LD_15_00_0210
Bugfixes

D-0445 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Dimension style exports
Dimension style exports to DWG now work properly when custom arrow ends are used.

D-0446 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
LDM Export
LDM12 exports were broken in Version 15.0.205 and could not be reimported properly. The issue has been fixed.

LD_15_00_0201
Bugfixes

D-0444 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Ghost recursion: multiple ghosts
The extra ghosts no longer appear.
attachments
2015-03-16_10-32-48

LD_15_00_0200
Bugfixes

D-0442 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Front left corner of car uglier than in 5.4
The looks from 5.4 have been restored.

LD_15_00_0136
Bugfixes

D-0441 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Ghost display wrong: Missing or too many components
The lazy rebuild problem has been solved.

LD_15_00_0118
EN 81 Hotfix

D-0427 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
EN 81 support "fork lift" guide rail calculations
The guide rail calculation now supports fork lift use.
attachments
2014-10-02_16-07-33
attachments
2014-10-02_16-09-03
D-0428 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
EN 81: Calculation result numbering wrong
Rounding was disabled for the EN 81 reports. This problem has been fixed.

D-0429 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
CWT compensation ratio
The values of the guide rail caluclation and the CWT calculation have been unified. You can now also enter one decimal digit.
attachments
2014-10-10_15-30-14
D-0430 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
EN 81 Performance improvement
Due to a bug, the EN 81 calculations took longer and longer for a specific project. This problem has been fixed.

LD_15_00_0108
Improvements for escalators


LD_15_00_0103
Hotfix Version

D-0347 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Access violation in LDXSheetFrame.CalculateWorldToPaper
LDXSheetFrame.CalculateWorldToPaper crashed under specific situations. This problem has been fixed

LD_15_00_0097
Release from 25. June 2014

D-0335 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
New DB column:SHEETIT_MF_RID
New DB column in L_InternetSheetItemTab (since 15.00.93)

D-0336 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Report docking window fixes
Column widths are stored properly in the ld3-file.

D-0337 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
LD BIM export fails under special conditions
This problem has been fixed

D-0338 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
New success meesage after data pool initialisation
A new message box appears at the end of the installation. Also the installation program is now shown in the task bar.

D-0339 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Crash handler
A crash handler has been implemnted for the rare case of an application crash.

D-0340 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
new dll: Interop.NETWORKLIST.dll
Has been added to the distribution.

D-0341 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Added column: LD LESC_ModelItemGrp2Tab.LEMIG2_AO2 (float, default 0)
since version 15.0.069

D-0342 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Added CleanupUnusedProfileGroups
Unused Profile groups are purged from the database.

D-0343 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Added EMA brackets, updated Wittur library
product data added & updated

D-0344 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
DB fix for L_TravelingCableTab
Some columns where wrongly "int": fixed to "bigint"

D-0345 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
DB Fix for some tables
Removed constraints for DB from LD_LDMItemTab, LD_OptionsTab, LD_FieldCategoryTab, LD_PropNaviConfigTab, LD_DialogTitlesItemTab ; added MF_RID columns

D-0346 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Car door openings displaced by wall thickness
The issue has been resolved

LD_15_00_0056
Released 18. May 2015

D-0253 (Closed)
Created by: Kai Nitz
Last change: 11/17/2020
Cleanup Unused Profile Groups
Profile Groups (including profiles, points, properties, etc.) are not deleted automaticaly when deleting the corresponding component.

D-0318 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
DWG Export: last view has incorrect print margin settings
The issue has been resolved.

D-0320 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Some holes are missing in entrance views
The issue has been fixed.

D-0324 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Improve automatic datapool import & creation
Several improvements forautomatic datapool creation

LD_15_00_0017
Released April 2014 ( Initial 15.0)

D-0211 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Car measures jump
The problem is fixed.

D-0270 (Closed)
Created by: Nishantha Weerasinghe
Last change: 11/17/2020
Ribbon Schaltfläche für Languages Dialog fehlt
attachments
Languages
D-0276 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
CWT Inlets are not created properly in Autodesk Inventor
This problem has been fixed.

D-0298 (Closed)
Created by: Nikolaj Merzlikin
Last change: 11/17/2020
Bei der Schienenberechnung für die Gegengewichtsschienen lässt sich der Stoßfaktor nur noch in ganzen Zahlen einstellen
Bei der Schienenberechnung für die Gegengewichtsschienen lässt sich der Stoßfaktor nur noch in ganzen Zahlen einstellen, sollte auch in Kommazahlen einstellbar sein.

D-0303 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
New docking window: Characteristic Points
New docking window has been implemented

D-0304 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
New tab in Properties: Options and Rules
New tab is added.

D-0305 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Dynamic dimension points copied to car and counterweight ghosts
Ghost components now can contain selected dynamic dimension points from their originals

D-0306 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Ghost does not contain all components that should be visible
The problem is fixed.

D-0307 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Performance enhancements
Performance bottlenecks are eliminated.

D-0309 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Concrete hatch pattern AR_CONC wrong
proper support has now been implemented

D-0310 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Custom counterweight and ghost position per view frame
D-0311 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
First DWG export duplicates elements
This problem has been fixed.

D-0312 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Dynamic dimensions sometimes vanish on view frame load
Issue has been fixed.

D-0331 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
New options fo Rope Compensation unit
The RCU got new properties and options.

LD_14_01_0048
Released 16. July 2013 ( Initial 14.1)

D-0218 (Closed)
Created by: Karin Klingenberg
Last change: 11/17/2020
Allow DigiPara Liftdesigner to create IFC files
The IFC file format is now available in DigiPara Liftdesigner

D-0275 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
"Redo" button doesn't work
This problem has been fixed.

D-0286 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
DigiPara Liftdesigner Datamanager: new features
- Copy Components
- Tabledata Editor

D-0287 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Improvements for updating from 5.4
The software has been improved to allow 5.4 clients to upgrade on version 2014. A 32 bit version is available even on 64 bit operating systems.

D-0288 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Help System available online
All Help information is available online. The local Help is deprecated and will not be continued.

D-0293 (Closed)
Created by: Nikolaj Merzlikin
Last change: 11/17/2020
Find and Replace in DigiPara Liftdesigner Datamanager
New Feature: Find and Replace in DigiPara Liftdesigner Datamanager

LD_14_00_0094
Fixes the MPD issue

D-0280 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Main Project Data/car configurator dialog box shows wrong properties
This problem has been fixed.

LD_14_00_0092
Released: 29 April 2013

D-0279 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Fixes for SQL Server Express Settings
The SQL Express Instance is created to work in "Mixed mode", allowing users with limited permissions to working properly.

LD_14_00_0085
Initial 2014 version

D-0214 (Closed)
Created by: Nikolaj Merzlikin
Last change: 11/17/2020
CAD Files(CAD Profile)
New table in database for CAD files (CAD profiles) and new funtionality in DigiPara Liftdesigner Datamager to maintain these tables.

D-0228 (Closed)
Created by: Kai Nitz
Last change: 11/17/2020
Liftdesigner 5 and large projects

LD_05_04_0100
View frame overrides hotfix

D-0285 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Only let Overrides set flags they are allowed to clear as well.
Only let Overrides set flags they are allowed to clear as well.

LD_05_04_0099
Escalator Automation bugfix

D-0283 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Lifting point dimensions for splits show up at wrong position
For more than two split locations, the lifting point dimensions were displayed in wrong order under certain circumstances.

D-0284 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Adding RLE and RLO to list of characters to be considered right to left printed.
Adding RLE and RLO to list of characters to be considered right to left printed. Fixes misinterpretation of strings using them.

LD_05_04_0098
Bugfix and Interface Addition

D-0281 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Feature: ILDXLandingDoor5.Change_DFP_GRP64
A way to manually change the door fixing point group was requested. The new interface function ILDXLandingDoor5.Change_DFP_GRP64 gives access to a pre-existing internal function that provides the desired functionality.

D-0282 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
Door jamb position rounding error
For odd door heights, the upper door jamb position was off by .5 mm.

LD_05_04_0097
Bugfix Release

D-0212 (Closed)
Created by: Manuel Moos
Last change: 11/17/2020
File versioning
D-0271 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Simply upgrade everyone to file version 2007 for sheet overlays.
Simply upgrade everyone to file version 2007 for sheet overlays.

D-0272 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Renaming versioning constants so ld 2014 can determine whether files created with some 5.4 are compatible.
Renaming versioning constants so ld 2014 can determine whether files created with some 5.4 are compatible.

D-0273 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Fix for codepage mismatch problem
Fix for codepage mismatch problem: use more recent DWG file version if the default codepages of Windows and AutoCAD do not match (contrary to installation recommendations). Version 2000 has no proper support for codepages at all, our DWG library seems to have problems with Version 2004, which leaves 2007 as the oldest possible choice.

LD_05_04_0096
Bug fixes

D-0266 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Designation Symbol for each Floor is not placed properly in vertical section
In case of very high rough openings, e.g. 5000 mm, the symbol was placed at 2500 ( half opening height). The symbol placement has been changed and is now shown at half door height.

LD_05_04_0095
Released: 14 March 2013 Checkdistance Bugfix Release

D-0263 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Fixed LDXCheckDistance.
Assigned meaningful names to LDX.CheckDistanceModes.
Fixed return value of LDXCheckDistance.Calculate().
Added new modes to LDXCheckDistance.Calculate() to exclude all sub components from components given in exclude list.

LD_05_04_0094
Released: 07 February 2013 Escalator Automation bugfix

D-0257 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Transport dimensions can be of any order now.

LD_05_04_0092
Bugfix release

D-0244 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Added LDXApplication-ConnectString property
A new property has been added to the API. Using this property allows to be compatible for future SQL Server releases.

D-0245 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
MR is showing shaft holes, even when the shaft is not displayed
In some cases the shaft holes were not displayed in the MR floor, in particular in caes the shaft was disabled. This problem has been fixed.

D-0246 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
EMF export does not support "German characters (Umlaute)"
This problem has been fixed.

D-0248 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
ld3-File version recognition
Starting from this version, Digipara Liftdesigner will no more crash when it tries to open a LD3-file that was created by a newer version as itself.

LD_05_04_0089
Released: 23 November 2012 Escalator Automation bugfix

D-0234 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Added dynamic balustrade extensions and support for delivery in 7 sections.
D-0235 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Fixed Xml parameter multi-mapping.

LD_05_04_0087
Improvements for Windows 8

D-0175 (Closed)
Created by: Karin Klingenberg
Last change: 11/17/2020
New license contract
The DigiPara Liftdesigner license contract has been updated

D-0216 (Closed)
Created by: Kai Nitz
Last change: 11/17/2020
Rope Navigator in DigiPara® Liftdesigner Corporate Suite shows no content
The "Liftdatamanager.ldm" and "Common Components.ldm" have been updated to fix the missing manufacturer content issue in the DigiPara® Liftdesigner Rope Navigator dialog. Only the Corporate Suite versions have been affected by this issue!
download D-0216.docx
D-0219 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Liftdesigner does not install for Windows 8
D-0223 (Closed)
Created by: Kai Nitz
Last change: 11/17/2020
DigiPara® Liftdesigner 5 and Windows 8
DigiPara® Liftdesigner installation problem under Windows 8:
Due to a missing .NET Framework version the registration of some components failed and caused the installation to rollback.

This issue has been fixed. The installation now checks the corresponding framework version upfront and installs it if necessary.

LD_05_04_0086
Released: 07 September 2012 DWG export improvements

D-0209 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Dimension Arrowheads are not scaled correctly in DWG Export when ProjectUnits=Metric / DisplayUnits=Imperial and vice versa.

LD_05_04_0085
Released: 3.Aug.2012 Hebrew character & double decker supportVersion

D-0159 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Hebrew characters are now supported
This problem has been fixed.

D-0191 (Closed)
Created by: Karin Klingenberg
Last change: 11/17/2020
Add machine bed for planet gear to the Common Components library
We have added the following machine bed to the Common Components library:
- Machine bed for planet gear with deflection sheave on the right/left side
download SAC KAİDE.dwg
D-0194 (Closed)
Created by: Karin Klingenberg
Last change: 11/17/2020
Bug: main project data window - guide rails
Manufacturer for guide rails cannot be changed in the main project data window. This issue has been solved.
download Fehler Navigator Car Guides im MaiProjectData dialog.docx
D-0203 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Support for Double Decker Elevators
This feature has been added. Select a 1:1 double decker car frame to add a second cabine.

LD_05_04_0075
Released 20 June 2012

D-0130 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Update: Sicor library
We have added new machines to the Sicor library:
- MR7, MR8, MR13, MR16, MR35 traction machines and appropriated machine frames
- SG-20-180A and SG-40-180A gearless traction machines

D-0156 (Closed)
Created by: Sergej Heer
Last change: 11/17/2020
Update: Sassi library
We have added new machines and frames to the Sassi library:
- G200-L1, G300-L0/L1, G400-L0/L1/L2, G500-T1/T2 gearless traction machines
- High frame with deflection sheave, flat frame with deflection sheave and flat frame with two deflection sheaves for traction machine G400-L2

D-0158 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Dimension text is not placed properly
In case the view frame text height is deviating, the text was wrongly placed. This problem has been fixed.
download _dimensionalignmentproblem.ld3
D-0170 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Ignore SHEET_CONDITION for manual sheet template loading
This problem has been fixed.

D-0171 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
New: DigiPara Liftdesigner BIM Exchange for Autodesk Revit
This new feature allows you to save DigiPara Liftdesigner drawings as LD BIM files (*.ldBIM) to load a 3-D elevator BIM model into Autodesk Revit software.

D-0172 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
New: SVG export (2-D Internet vector format)
SVG files can now be exported from DigiPara Liftdesigner. This 2-D drawing format can be displayed in almost any browser and is useful for displaying 2-D data on mobile devices (like iPad).

D-0176 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
H0 dimension cannot be modified in Extended Buffer dialog
This problem has been fixed.

D-0178 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
New Option for Shaft Lamplist: Fix at separator beam
set flag Shaft0.LampList.LPL_MODE =| 0x0008

D-0188 (Closed)
Created by: Karin Klingenberg
Last change: 11/17/2020
Add 4:1 car frames & duty tables
Metric 4:1 traction elevators can now be selected from the Shaftwizard in DigiPara Liftdesigner.

D-0189 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
New: 3-D DWG export
It is now possible to export elevators drawings as 3-D DWG files.

D-0190 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Improvement: DWG file
When saving drawings as DWG file, DigiPara Liftdesigner now supports transparency values (e.g. for glass elements). Transparancy values are visible in AutoCAD 2004 version and higher.

LD_05_04_0063
Released 10.Feb.12

D-0082 (Closed)
Created by: Kai Nitz
Last change: 11/17/2020
Shaft pit calculation
In an elevator group with 2 or more similar shaft, the pit of the 2nd shaft needs to by higher than the pit of the first shaft, according to the calculation. This problem has been solved

D-0131 (Closed)
Created by: Kai Nitz
Last change: 11/17/2020
Wrong Roping course in version 5.4.51
The roping course for a 2:1 counterweight with 2 pulleys above was wrong in Build 5.4.51. This problem has been fixed.
download Problem_Seilverlauf-GGW.ld3
D-0146 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Specific text in dwg causes exception in LD
Text like "%%U" causes an exception. This problem has been fixed

D-0147 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Hatch is missing in vertical section
In case of face to face arrangements, hatch is missing in the vertical section. Also some components are not displayed. This problem has been fixed.

D-0148 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Metric dimensions are wrongly displayed in Imperial Projects
For small dimensions, dimension text was not properly aligned. This problem has been fixed.

D-0149 (Closed)
Created by: Kai Nitz
Last change: 11/17/2020
Load Conditions
The Results for "Normal Operation" and "Emergency braking" situation on the Car/ Counterweight side were not calculated correctly according to the default Acceleration/ Deceleration value. This problem has been fixed.

D-0150 (Closed)
Created by: Kai Nitz
Last change: 11/17/2020
Acceleration / Deceleration of the Car
The direction or sense of the acceleration used for all four cases in the emergency braking situation (both on the car and counterweight sides) was wrong. This problem has been fixed.

D-0151 (Closed)
Created by: Kai Nitz
Last change: 11/17/2020
Grooving consideration - V-Groove with undercut
Although, the undercut for the traction sheave v-groove was not defined in the Grooving Consideration settings of the Rope Calculation, it still was taken into acocunt in the calculation reports. This problem has been fixed.

D-0152 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Characters "\pxqc;" appear in the drawing
"\pxqc;" and several similar texts are escape sequences within Autocad to align text. These sequences are not support. To avoid the wrongly displayed characters it is automatically hidden.

D-0153 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Added support for unique top and bottom handrail entry boxes
D-0155 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Improvements for symbolic vertical section
In some cases (small floor to floor height, elevator groups) the symbolic vertical section looked wrong. This problem has been fixed. Improved Imperial default values for symbolic section.

LD_05_04_0051
Released 28.Sep.11

D-0002 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
m/cm support for External$ Expressions in MTEXT
Using the #DispUnits# option, e.g. External$("Shaft0.PTM.Y0","#DispUnits#") allows displaying mm/cm units even in MTEXT. Minor bug fixes.

D-0004 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
CSU_USER_PGs and CY_USER_PGs are not available in LD
These parameters have been added to the components and can be used for product loading.

D-0005 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Manual placed car ceiling lights forget location
This problem has been solved.

D-0027 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
TXControl in Navigator does not work
In the rare case of a text assigned to a product the text display control was not shown and caused a warning in the log. This problem has been fixed.
attachments
navigatorexception
attachments
error2
D-0108 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Added: 3D STEP & SAT export to the file menu
2 new commands have been added to the file menu. An additional license is required to use these 2 new exports.

D-0109 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Text Editor did not show Font Size
No font size was displayed in the "Text Editor", the red error mark appeared in the status bar indicating a program exception. This issue has been solved.

D-0111 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Liftdesigner crahes when a SPLINE is in a dwg file
LD crahes will displaying a dwg file that contains one or more splines. This bug has been fixed.

D-0112 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Bottom traction machine in wrong location
In case of a group of elevators some of the traction machines were at a wrong location. This problem has been fixed
download Falsche AntriebsplatzierungMaschinenraumHintenUntenInGruppe.ld3
D-0113 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
LD3-File format changed
Several enhancements required the change of the file format. Files saved with 5.4.51 and newer cannot be opened with earlier versions.

LD_05_04_0045
Escalator Automation improvements

D-0105 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Truss width and total width can differ
Added support for unequal truss and total width.

LD_05_04_0044
Support for Belts, Chinese translation added

D-0046 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
User defined profiles are displayed, even if they are in front of the projection plane
This problem has been fixed
download item0364.ld3
D-0098 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Support for Belts added (ld3- file format changed)
Added PG_GRP support to L_RopeTab. Add charact. points (Code 180-189) for several belt-outlines to the group.

D-0102 (Open)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Added Traditional Chinese drawing translations
Traditional Chinese (ZH_TW) has been added. This translation is only available for drawings.

LD_05_04_0043
Escalator Automation bugfix

D-0083 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Enhanced Expression Parser for XML Interface
XML mapping now supports <>= style expressions

D-0097 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Intermediate Support "At the back of pit"
Plan view section generation for intermediate support "At the back of pit" fixed.

LD_05_04_0041
Escalator Automation improvements

D-000002 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Empty BLOCKNAME in displayed DWG
A dwg file was not displayed in the drawing, in case the dwg contained a BLOCK without name. This problem has been fixed.

D-0001 (Closed)
Created by: Andreas Fleischmann
Last change: 11/17/2020
Dynamic Dimension Point for Buffer
In case of hydraulic buffers, the top dynamic dimension point was displayed in a wrong place. This problem has been fixed

D-0063 (Closed)
Created by: Heiko Richter
Last change: 11/17/2020
Improved logic for handrail entry box and inner/outer deckings
- Handrail entry box can now be geometrically "sliced" infinitely
- Added mode to inner/outer deckings to disable automatic profile generation and use a profile group instead
Created date
Description
File name
6/19/2024
DigiPara Liftdesigner 2024 Installation (Version 2024.0.0120)
4/30/2024
Previous DigiPara Liftdesigner 2024 Installation (Version 2024.0.0105)
12/1/2023
DigiPara Liftdesigner 2022 Installation (Version 2022.0.0300)
10/24/2023
Previous DigiPara Liftdesigner 2022 Installation (Version 2022.0.0295)
3/21/2022
DigiPara Liftdesigner 2021 Installation (Version 2021.0.0218)
3/23/2020
DigiPara Liftdesigner 2020 Installation (Version 2020.0.295)
10/8/2019
DigiPara Liftdesigner 2018 Installation (Version 2018.0.239)
8/30/2018
DigiPara Liftdesigner 2017 Installation (Version 2017.0.311)
9/28/2018
DigiPara Liftdesigner 2016 Installation (Version 2016.0.268)